MS-324R-4 S W I T C HI N G T HE S M A R T WAY MS-324R-4 Form C Reed Sensor Flatpack Electrical Characteristics @ 25 °C Contact form Features C W / VA 5 VDC 175 VAC 120 Switching current max. A 0.25 Carry current max. A 1.5 Breakdown voltage min. VDC 200 Total resistance max. (initial) mΩ 200 Ω 10 9 Contact rating max. Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Pull in range available AT 5 TC - 200 Various sensitivity ranges available Approvals 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Compact size @ 25 °C Test coil ± AT Cable exit right 15 - 30 Drop out min. Test equipment tolerance Adjustable switching point @ 25 °C Hz 100 Resonant frequency typ. Hz 1100 Operate time max. (incl. bounce) ms 0.7 Release time max. ms 1 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 50 Environmental Characteristics Dimensions in mm Ordering Information Packing Unit 50 pcs Weight per piece 5.3 g Weight per package 270 g C I P © H b m G Standard AT Ranges 2= 15 to 20 AT 3= 20 to 25 AT 4= 25 to 30 AT Ordering Example MS-324R-4-2 describes MS-324R-4 with 15 to 20 AT. Page 1 of 2 Rev.: 1.1 ms324r4_ds_e_1.1 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com MS-324R-4 S W I T C HI N G T HE S M A R T WAY MS-324R-4 Form C Reed Sensor Flatpack Material Information Material Colour Housing ABS black Cable UL 1007/1569, AWG 26 , 4 mm stripped and tinned COM: black, NO: red, NC: brown Potting compound Epoxy black Test Procedure of final Reed Sensor Test Parameters Test coil TC- 324 Test programs AT range Test program 2 = MS-324-4-2 3 = MS-324-4-3 4 = MS-324-4-4 Remarks When mounted onto ferromagnetic parts switching distance of MS-324R-4 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Only non-ferromagnetic screws to be used for mounting. Matching actuator MSM-324 available as well. Test Coil placed in vertical position Reed Sensor centered in Test Coil Reed Sensor pushed into opposite corner of Test Coil Page 2 of 2 Rev.: 1.1 ms324r4_ds_e_1.1 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com