MS-216-7 S W I T C HI N G T HE S M A R T WAY MS-216-7 Normally Closed Reed Sensor Electrical Characteristics @ 25 °C Contact form B W / VA 5 VDC 175 VAC 120 Switching current max. A 0.25 Carry current max. A 1.5 Breakdown voltage min. VDC 200 Total resistance max. (initial) mΩ 200 Ω 10 9 Contact rating max. Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Drop out min. AT 5 Test coil TC 200 Test equipment tolerance ± AT Mechanically protected Non pole oriented actuation Customized types available Approvals 15 - 30 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Compact size @ 25 °C Pull in range available Features @ 25 °C Hz 100 Resonant frequency typ. Hz 1100 Operate time max. (incl. bounce) ms 0.7 Release time max. ms 1 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 50 Environmental Characteristics Dimensions in mm Ordering Information Packing Unit 50 pcs Weight per piece 3.8 g Weight per package 195 g C I P © H b m G Standard AT Ranges 2 = 15 to 20 AT 3 = 20 to 25 AT 4 = 25 to 30 AT Ordering Example MS-216-7-2-0500 describes MS-216-7 with 15 to 20 AT. Page 1 of 2 Rev.: 1.0 ms2167_ds_e_1.0 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com MS-216-7 S W I T C HI N G T HE S M A R T WAY MS-216-7 Normally Closed Reed Sensor Material Information Material Colour ABS black Cable UL 1007/1569, AWG 24, 4 mm stripped and tinned black Potting compound Epoxy black Housing Test Procedure of final Reed Sensor Test Parameters Test coil TC- 093 Test programs AT range Test program 2 = MS-216-7 -2 3 = MS-216-7 -3 4 = MS-216-7 -4 Remarks When mounted onto ferromagnetic parts switching distance of MS-216-7 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Product image serves as example only. Test Coil placed in vertical position Reed Sensor aligns with bottom line Reed Sensor centered in Test Coil Page 2 of 2 Rev.: 1.0 ms2167_ds_e_1.0 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com