MS-217-4 S W I T C HI N G T HE S M A R T WAY MS-217-4 Form C Reed Sensor Electrical Characteristics @ 25 °C Contact form Features C W / VA 5 VDC 175 VAC 120 Switching current max. A 0.25 Carry current max. A 1.5 Breakdown voltage min. VDC 200 Total resistance max. (initial) mΩ 200 Ω 10 9 Contact rating max. Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Drop out min. AT 5 Test coil TC 200 ± AT Replaces various competitors types Customized types available Approvals 15 - 30 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Mechanically protected @ 25 °C Pull in range available Test equipment tolerance Not ESD sensitive @ 25 °C Hz 100 Resonant frequency typ. Hz 1100 Operate time max. (incl. bounce) ms 0.7 Release time max. ms 1 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 50 Environmental Characteristics © PIC GmbH Dimensions in mm Ordering Information Packing Unit 50 pcs Weight per piece 6.2 g Weight per package 330 g Standard AT Ranges 2 = 15 to 20 AT 3 = 20 to 25 AT 4 = 25 to 30 AT Ordering Example MS-217-4-2 describes MS-217-4 with 15 to 20 AT. Page 1 of 2 Rev.: 1.2 ms2174_ds_e_1.2 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com MS-217-4 S W I T C HI N G T HE S M A R T WAY MS-217-4 Form C Reed Sensor Material Information Material Colour Housing ABS black Cable UL 1061, AWG 24, 4 mm stripped and tinned COM: black, NO: red, NC: brown Potting compound Epoxy black Test Procedure of final Reed Sensor Test Parameters Test coil TC- 093 Test programs AT range Test program 2 = MS-217-4-2 3 = MS-217-4-3 4 = MS-217-4-4 Remarks When mounted onto ferromagnetic parts switching distance of MS-217-4 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Test Coil placed in vertical position Reed Sensor aligns with bottom line Reed Sensor centered in Test Coil Page 2 of 2 Rev.: 1.2 ms2174_ds_e_1.2 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com