HSR-634WT S W I T C HI N G T HE S M A R T WAY HSR-634WT Power Form C Switch Electrical Characteristics @ 25 °C Contact form Features C 100 Power Form C switch with tungsten contacts VDC 120 Form A switch (normally open type) VAC 120 Contact material W* W / VA Contact rating max. Switching voltage max. Switching current max. A 3 Carry current max. A 3 Breakdown voltage min. VDC 150 Contact resistance max. (initial) mΩ 500 Insulation resistance min. Ω Various sensitivity ranges available 10 10 *Minimum load for contact material W: 3 Watts ! Magnetical Characteristics (of unmodified Reed Switch) Pull in range available AT @ 25 °C Drop out min. AT 30 Test coil TC 094 Test equipment tolerance ± AT 3 Operating Characteristics @ 25 °C Hz 50 Resonant frequency typ. Hz 2000 Operate time max. (incl. bounce) ms 5 Release time max. ms 5 Switching frequency max. Approvals 60 - 100 Environmental Characteristics -40 to + 125 Operating temperature °C Vibration (50-2000 Hz) g 15 Shock (1/2 sin 11 ms) g 10 Ordering Information Packing Unit 100 pcs Weight per piece 1.8 g Weight per package 305 g Standard AT ranges © PIC GmbH 60 to 70 AT Dimensions in mm 70 to 80 AT 80 to 90 AT 90 to 100 AT Ordering example HSR-634WT6070 describes HSR-634WT with 60 to 70 AT. Page 1 of 1 Rev.: 1.2 hsr634wt_ds_e_1.2 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com