HSR-V207 S W I T C HI N G T HE S M A R T WAY HSR-V207 High Power Reed Switch Electrical Characteristics @ 25 °C Contact form Features A Contact material Breakdown voltage min. 7,000 VDC W* W / VA Contact rating max. Switching voltage max. 200 VDC 3500 VAC 3500 Switching current max. A 3 Carry current max. A 5 Breakdown voltage min. VDC 7000 Contact resistance max. (initial) mΩ 500 Insulation resistance min. Ω Form A switch (normally open type) 200 Watts Power Switch Various sensitivity ranges available 10 10 *Minimum load for contact material W: 3 Watts ! Magnetical Characteristics (of unmodified Reed Switch) Pull in range available AT @ 25 °C Drop out min. AT 30 Test coil TC 093 Test equipment tolerance ± AT 4 Operating Characteristics @ 25 °C Hz 50 Resonant frequency typ. Hz 300 Operate time max. (incl. bounce) ms 4 Release time max. ms 1 Switching frequency max. Approvals 100 - 150 Environmental Characteristics -60 to + 125 Operating temperature °C Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 50 Ordering Information Packing Unit 100 pcs Weight per piece 2.3 g Weight per package 392 g Standard AT ranges © PIC GmbH 100 to 110 AT Dimensions in mm 110 to 120 AT 120 to 130 AT 130 to 140 AT 140 to 150 AT Ordering example HSR-V207100110 describes HSR-V207 with 100 to 110 AT. Page 1 of 1 Rev.: 2.4 hsrv207_ds_e_2.4 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com