HSR-V7K S W I T C HI N G T HE S M A R T WAY HSR-V7K High Voltage Reed Switch Electrical Characteristics @ 25 °C Contact form Features A Contact material Form A switch (normally open type) W* W / VA Contact rating max. Switching voltage max. 50 VDC 4000 VAC 2800 Switching current max. A 3 Carry current max. A 4.5 Breakdown voltage min. VDC 7000 Contact resistance max. (initial) mΩ 150 Insulation resistance min. Ω Switching voltage 4 kV Various sensitivity ranges available Breakdown voltage min. 7,000 VDC 10 10 *Minimum load for contact material W: 3 Watts ! Magnetical Characteristics (of unmodified Reed Switch) Pull in range available AT @ 25 °C Drop out min. AT 20 Test coil TC 093 Test equipment tolerance 3 ± AT Operating Characteristics @ 25 °C Hz 50 Resonant frequency typ. Hz 300 Operate time max. (incl. bounce) ms 4 Release time max. ms 1 Switching frequency max. Approvals 60 - 125 Environmental Characteristics -60 to + 125 Operating temperature °C Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 100 Life Expectancy Ordering Information Resistive load Voltage Current Operations Packing Unit 100 pcs 24 VDC 2A 1 x1 # Weight per piece 2.3 g 5000 VDC 0.01 A 1 x1 # Weight per package 392 g Standard AT ranges 60 to 70 AT Dimensions in mm 70 to 80 AT C I P © H b m G 80 to 90 AT 90 to 100 AT 100 to 110 AT 110 to 120 AT 120 to 125 AT Ordering example HSR-V7K6070 describes HSR-V7K with 60 to 70 AT. Page 1 of 1 Rev.: 2.5 hsrv7k_ds_e_2.5 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com