HUAAN LIMITED P26C -- P26C SIDACtor Protection Thyristor Package DO-214AA Description Fast Delivery Time P26C SIDACtor Protection Thyristor protect telecommunications equipment such as ADSL Modems,Router, , Telephone, CCTV Camera,Digital Video Record,Video Capture Card,Twisted-pair video transmitter,CATV Splitter.....Etc. P26C SIDACtor Protection Thyristor are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20/21,IEC 61000-4-5, YD/T 1082,YD/T 993,YD/T 950,TIA-968-A ,TIA-968-B Features Compared to surge suppression using other technologies, P26C devices offer absolute surge protection regardless of the surge current available and the rate of applied voltage (dv/dt). P26C devices: • 100% Lead-Free(RoHs Compliant ) • Cannot be damaged by voltage • Eliminate hysteresis and heat dissipation typically found with clamping devices • Eliminate voltage overshoot caused by fast-rising transients • Are non-degenerative • Have low capacitance, making them ideal for high-speed transmission equipment Electrical Characteristics Parameter VDRM Definition Peak Off-state Voltage — maximum voltage that can be applied while maintaining off state VS IH Switching Voltage — maximum voltage prior to switching to on state IS Switching Current — maximum current required to switch to on state IT On-state Current — maximum rated continuous on-state current VT On-state Voltage — maximum voltage measured at rated on-state current Capacitance IDRM Holding Current — minimum current required to maintain on state Off-state Capacitance — typical capacitance measured in off state Leakage Current — maximum peak off-state current measured at VDRM IPP Peak Pulse Current — maximum rated peak impulse current ITSM Peak One-cycle Surge Current — maximum rated one-cycle AC current di/dt Rate of Rise of Current — maximum rated value of the acceptable rate of rise in current over time 1 Revised:February 25,2014 www.huaandz.com HUAAN Electrical LIMITED P26C -- P26C Characteristics Part Number VDRM @IDRM=5μA @100V/μs V min V max mA min mA max A max Vmax pF 220 300 150 800 2.2 4 65 P26C VS IH IS IT VT Capacitance @IT=2.2Amps @1MHz,2V bias Notes: -All measurements are made at an ambient temperature of 25°C .Ipp applies to -40°C through +85°C temperature range . -Off-state capacitance(Co) is typical value. Ipp Ipp Ipp Ipp Ipp Ipp Ipp Ipp ITSM 2x10µs 8x20µs 10x160µs 10x560µs 10x1000µs 5x320µs 5x310µs 10x360µs 50/60Hz Series Amps Amps Amps Amps Amps Amps Amps Amps Amps Amps/µs C 500 400 200 150 100 200 200 175 30 500 Package DO-214AA/SMB Symbol Parameter Value Unit TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C RθJA Junction to Ambient on prited circuit 90 °C /W Description of Part Number P 26 C Ipp Rating(10x1000µs)C=100A Median Voltage P=SIDACtor Protection Thyristor 2 Revised:February 25,2014 di/dt www.huaandz.com HUAAN LIMITED P26C -- P26C Dimensions - DO-214AA Dimension Inches Millimeters Min Max Min Max A 0.134 0.155 3.40 3.94 B 0.205 0.22 5.21 5.59 C 0.075 0.083 1.90 2.11 D 0.166 0.185 4.22 4.70 E 0.036 0.056 0.91 1.42 F 0.073 0.087 1.85 2.2 G 0.002 0.008 0.05 0.20 H 0.077 0.094 1.95 2.40 J 0.043 0.053 1.09 1.35 K 0.008 0.014 0.20 0.35 L 0.039 0.049 0.99 1.24 3 Revised:February 25,2014 www.huaandz.com HUAAN LIMITED (SIDACtor Protection Thyristors ) Packing Options Package Type P26C Description Packing Quantity Industry Standard DO-214AA Reel Pack 2500 PCS EIA-481-D Characteristics Curve V-I Characteristics Tr x Td Pulse Waveform Normalized Vs Change Versus Junction Temperature Specifications are subject to change without notice Normalized DC Holding Current Versus Case Temperature [email protected] [email protected] 4 Revised:February 25,2014 www.huaandz.com Tel:+86-755-27465585