MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 105℃ KRG KRG Series ・Low profile :φ4×7mm toφ18×25mm ・Endurance : 1,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant Downsized Low profile Downsized KMA P113 KMG P129 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -55 to +105℃ 6.3 to 50Vdc ±20% (M) (at 20℃, 120Hz) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 0.28 0.24 0.20 0.16 0.14 0.12 tanδ(Max.) When nominal capacitance exceeds 1,000µF, add 0.03 to the value above for each 1,000µF increase. (at 20℃, 120Hz) 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 3 2 2 2 4 5 Z(-25℃)/Z(+20℃) 6 4 3 3 8 10 Z(-40℃)/Z(+20℃) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 1,000 hours at 105℃. Rated voltage 6.3 to 16Vdc 25 to 50Vdc Capacitance change ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 16Vdc 25 to 50Vdc ≦±20% of the initial value Capacitance change ≦±25% of the initial value ≦200% of the initial specified value ≦200% of the initial specified value D.F. (tanδ) ≦The initial specified value ≦The initial specified value Leakage current ◆DIMENSIONS [mm] F±0.5 φd φD' F±0.5 Code : E Sleeve (PET : Brown) F±0.5 ●Terminal or L' 15min. 4min. Vent (φ10 and larger) (φ4 to φ10) (φ12.5 to φ18) Gas escape end seal 8 4 6.3 10 & 12.5 16 & 18 φD 5 7L 0.45 0.45 0.45 0.5 0.5 0.6 0.6 0.8 ≧9L 5.0 7.5 F 1.5 2.0 2.5 3.5 φD ' φD+0.5max. L' L+1.5max. (7L : L+1.0max.) φd ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KRG AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10µF:100, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 117 CAT. No. E1001N MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 105℃ KRGSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Case size φD×L(mm) tanδ Rated ripple current (mArms/ 105℃,120Hz) Part No. 47 330 1,000 4,700 6,800 10,000 22 100 100 220 470 1,000 2,200 3,300 4,700 6,800 10,000 33 47 100 220 330 470 1,000 2,200 3,300 4,700 6,800 10 22 33 47 47 100 330 5×7 6.3×9 10×9 16×15 18×15 18×20 4×7 5×9 6.3×7 6.3×9 8×9 10×12.5 12.5×15 16×15 18×15 18×20 18×25 5×7 6.3×7 6.3×7 8×9 8×9 10×9 12.5×13 16×15 18×15 18×20 18×25 4×7 5×7 6.3×7 5×9 6.3×7 6.3×9 10×9 0.28 0.28 0.28 0.37 0.43 0.55 0.24 0.24 0.24 0.24 0.24 0.24 0.27 0.30 0.33 0.39 0.51 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.23 0.26 0.29 0.35 0.16 0.16 0.16 0.16 0.16 0.16 0.16 50 175 365 1,010 1,190 1,440 35 93 80 154 272 445 690 940 1,120 1,330 1,700 53 68 97 205 251 290 515 830 1,050 1,260 1,560 30 46 63 75 71 121 270 EKRG6R3E□□470ME07D EKRG6R3E□□331MF09D EKRG6R3E□□102MJ09S EKRG6R3E□□472ML15S EKRG6R3E□□682MM15S EKRG6R3E□□103MM20S EKRG100E□□220MD07D EKRG100E□□101ME09D EKRG100E□□101MF07D EKRG100E□□221MF09D EKRG100E□□471MH09D EKRG100E□□102MJC5S EKRG100E□□222MK15S EKRG100E□□332ML15S EKRG100E□□472MM15S EKRG100E□□682MM20S EKRG100E□□103MM25S EKRG160E□□330ME07D EKRG160E□□470MF07D EKRG160E□□101MF07D EKRG160E□□221MH09D EKRG160E□□331MH09D EKRG160E□□471MJ09S EKRG160E□□102MK13S EKRG160E□□222ML15S EKRG160E□□332MM15S EKRG160E□□472MM20S EKRG160E□□682MM25S EKRG250E□□100MD07D EKRG250E□□220ME07D EKRG250E□□330MF07D EKRG250E□□470ME09D EKRG250E□□470MF07D EKRG250E□□101MF09D EKRG250E□□331MJ09S WV (Vdc) 25 35 50 Cap (µF) Case size φD×L(mm) tanδ Rated ripple current (mArms/ 105℃,120Hz) Part No. 470 1,000 2,200 3,300 4,700 10 22 33 33 100 220 330 470 1,000 2,200 1.0 1.0 2.2 2.2 3.3 3.3 4.7 4.7 10 10 22 22 33 47 100 220 330 470 1,000 10×12.5 12.5×15 18×15 18×20 18×25 5×7 6.3×7 5×9 6.3×7 8×9 10×9 10×12.5 12.5×13 16×15 18×20 4×7 5×9 4×7 5×9 4×7 5×9 4×7 5×9 5×9 6.3×7 5×9 6.3×7 6.3×9 6.3×9 10×9 10×12.5 12.5×13 16×15 18×20 0.16 0.16 0.19 0.22 0.25 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.17 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 370 590 970 1,220 1,470 36 57 67 64 155 235 340 415 720 1,110 10 12 15 18 18 22 25 27 46 44 61 57 80 95 170 290 370 535 830 EKRG250E□□471MJC5S EKRG250E□□102MK15S EKRG250E□□222MM15S EKRG250E□□332MM20S EKRG250E□□472MM25S EKRG350E□□100ME07D EKRG350E□□220MF07D EKRG350E□□330ME09D EKRG350E□□330MF07D EKRG350E□□101MH09D EKRG350E□□221MJ09S EKRG350E□□331MJC5S EKRG350E□□471MK13S EKRG350E□□102ML15S EKRG350E□□222MM20S EKRG500E□□1R0MD07D EKRG500E□□1R0ME09D EKRG500E□□2R2MD07D EKRG500E□□2R2ME09D EKRG500E□□3R3MD07D EKRG500E□□3R3ME09D EKRG500E□□4R7MD07D EKRG500E□□4R7ME09D EKRG500E□□100ME09D EKRG500E□□100MF07D EKRG500E□□220ME09D EKRG500E□□220MF07D EKRG500E□□330MF09D EKRG500E□□470MF09D EKRG500E□□101MJ09S EKRG500E□□221MJC5S EKRG500E□□331MK13S EKRG500E□□471ML15S EKRG500E□□102MM20S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Capacitance (µF) Multipliers Frequency (Hz) to 4.7 10 to 47 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 118 CAT. No. E1001N