advertisement A Compact Dual Step-Down Converter with VOUT Tracking and Sequencing – Design Note 403 Tiger Zhou and David Canny Introduction Typical industrial and automotive applications require multiple high current, low voltage power supply solutions to drive everything from disc drives to microprocessors. For many of these applications, particularly those that have size constraints, the LT3501® dual step-down converter is an attractive solution because it’s compact and inexpensive compared to a 2-chip solution. The dual converter accommodates a 3V to 25V input voltage range and is capable of supplying up to 3A per channel. The circuit in Figure 1 produces 3.3V and 1.8V. LT3501 Dual Converter Features • The LT3501 is feature-rich and comes with internal 3.5A switches and sense resistors to minimize solution size and cost. • The LT3501 operates at a fixed frequency between 250kHz and 1.5MHz, programmed using a single resistor or synchronized to an external clock, allowing optimization of efficiency and solution size. • A 180° phase relationship between the channels is maintained to reduce input voltage ripple and input capacitor size. • Independent input voltage, feedback, soft-start and power good functions for each converter simplify the implementation of all the tracking and sequencing options available. • Minimum input-to-output voltage ratios are extended by allowing the switch to stay on through multiple clock cycles resulting in a 95% maximum duty cycle regardless of switching frequency. • The LT3501 automatically resets the soft-start function if the output drops out of regulation so that a short circuit or brownout event is graceful and controlled. • One or both converters can be shutdown at any time if they’re not being used, reducing input power drain. • The LT3501 is available in a 20-pin TSSOP package with an exposed pad for low thermal resistance. , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. VIN 4.5V TO 24V 4.7µF X5R VIN1 4.7µH SHDN RT/SYNC BST1 BST2 SW1 SW2 0.47µF B360A PMEG4005 VOUT1 3.3V 3A, VIN < 16V 2.8A, VIN > 16V* VIN2 (fSW = 500kHz) 61.9k 0.47µF 3.3µH B360A LT3501 PMEG4005 IND1 VOUT1 100k 24.9k 8.06k 47µF X5R 40.2k 10pF 470pF 100k PG1 PG2 FB1 FB2 VC1 VC2 SS/TRACK1 SS/TRACK2 GND 0.1µF VOUT2 1.8V 3A, VIN < 16V 2.8A, VIN > 16V* IND2 VOUT2 10k 40.2k 470pF 8.06k 47pF DN403 F01 *FOR 3A CAPABILITY ABOVE 16V, INCREASE INDUCTOR VALUE BY 33%. Figure 1. Compact Dual 3A Step-Down Converter with Ceramic Capacitors 11/06/403 100µF X5R Output Supply Tracking and Sequencing Output voltage tracking and sequencing between channels can be implemented using the LT3501’s soft-start and power good pins as shown in Figures 2(a) to 2(c). Output sequencing can also be implemented as shown in Figure 2(d). High Current Single VOUT, Low Ripple 6A Output The LT3501 can generate a single, low ripple 6A output as shown in Figure 3 with the dual converters sharing a single output capacitor. With this solution, ripple currents at the input and output are reduced, thus reducing voltage ripple and allowing the use of smaller, less expensive capacitors. VOUT1 1V/DIV PG1 VOUT2 1V/DIV PG2 PG2 DN403 F02a 10ms/DIV VOUT1 1V/DIV VOUT2 1V/DIV PG1 10ms/DIV (2a) Independent DN403 F02b (2b) Ratiometric VOUT1 1V/DIV VOUT2 1V/DIV PG2 VOUT1 1V/DIV VOUT2 1V/DIV PG1 PG2 DN403 F02c 10ms/DIV 10ms/DIV (2c) Absolute DN403 F02d (2d) Output Sequencing Figure 2. Output Voltage Tracking and Sequencing VIN 4.5V TO 24V 4.7µH PMEG4005 VOUT 3.3V 6A, VIN < 16V 5.6A, VIN > 16V 4.7µF X5R VIN1 RT/SYNC BST1 BST2 SW1 SW2 0.47µF B360A 0.47µF 4.7µH PMEG4005 IND2 VOUT2 100k 24.9k 8.06k (fSW = 500kHz) 61.9k B360A LT3501 IND1 VOUT1 100µF X5R VIN2 SHDN 10pF 40.2k PG1 PG2 FB1 FB2 VC2 VC1 SS/TRACK1 SS/TRACK2 GND 470pF 0.1µF DN403 F03 Figure 3. 4.5V to 24VIN, 3.3VOUT/6A Step-Down Converter Data Sheet Download For applications help, call (408) 432-1900, Ext. 3223 www.linear.com Linear Technology Corporation dn403f LT 1106 409K • PRINTED IN THE USA FAX: (408) 434-0507 ● www.linear.com © LINEAR TECHNOLOGY CORPORATION 2006 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 ●