DS56-0005 Low Cost Six-Way Power Divider 824 – 960 MHz Rev. V4 Features • • • • • • Small Size, Low Profile Superior Repeatability (Lot-to-Lot Variation) Typical Isolation 25 dB Typical Insertion Loss 0.8 dB Low Cost SOIC-16 Package Functional Block Diagram1 Description M/A-COM’s DS56-0005 is an IC-based monolithic power divider in a low cost SOIC-16 plastic package. The 6-way power divider is ideally suited for applications where PCB real estate is at a premium and part count reduction and cost are critical. Typical applications include base station switching networks and other cellular equipment, including subscriber units. Available in Tape and Reel. The DS56-0005 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. 1. All unused pins must be RF and DC grounded. Pin Configuration Ordering Information Pin No. Function Pin No. Function 1 GND 9 GND 2 RF 3 (OUT) 10 GND Part Number Package 3 GND 11 RF 6 (OUT) DS56-0005 Bulk Packaging 4 RF 2 (OUT) 12 GND DS56-0005-TR 1000 piece reel 5 GND 13 RF 5 (OUT) 6 RF 1 (OUT) 14 GND 7 GND 15 RF 4 (OUT) 8 RF IN 16 GND Note: Reference Application Note M513 for reel size information. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS56-0005 Low Cost Six-Way Power Divider 824 – 960 MHz Rev. V4 Electrical Specifications: TA = 25°C, Z0 = 50Ω Units Min Typ Max Insertion Loss above 7.8 dB Parameter dB — 0.8 1.2 Isolation dB 20 25 — Input Output — — — — 1.4:1 1.3:1 1.8:1 1.5:1 Amplitude Balance dB — 0.5 0.9 Deg. — 4 8 VSWR Phase Balance Absolute Maximum Ratings 2,3 Handling Procedures Please observe the following precautions to avoid damage: Parameter Absolute Maximum Input Power4 1 W CW Operating Temperature -40°C to +85°C Static Sensitivity Storage Temperature -65°C to +150°C GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W maximum. Typical Performance Curves Insertion Loss vs. Frequency Amplitude Imbalance vs. Frequency 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS56-0005 Low Cost Six-Way Power Divider 824 – 960 MHz Rev. V4 Typical Performance Curves Isolation vs. Frequency Phase Imbalance vs. Frequency Input VSWR vs. Frequency Output VSWR vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS56-0005 Low Cost Six-Way Power Divider 824 – 960 MHz Rev. V4 SOIC-16† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.