UV-LED MODULE It's here, the UV light source you've been waiting for! 14000 mW/cm2 LED driver C10559-01 APPLICATIONS ●UV adhesive curing ●UV irradiation experiments FEATURES LED head unit L10561/L10906 series ●Slim body ●Long life ●No fan ●High stability, High output Compact and light-weight design with the cubic volume reduced by 98 %! No more need to worry about how to reduce the footprint during production or assembly line design. The LC-L2 uses a modular structure containing a drive circuit and therefore allows a freely changeable layout without warring about space and location. It also uses LED driver harnesses ▼Our conventional model LC-L1 that eliminate the need for Cuts extension cables and makes the unit cubic available at a low volume cost. 40 PLC* LED DRIVER LED DRIVER HARNESS 98 %! 0 20 When used with an optional driver hub unit and control box, multiple units can be easily controlled via various interfaces such as RS-232C or from the operation panel of the control box. 12 LED HEAD UNIT *Programmable logic controller Unit: mm TLSZC0004EA TLSZC0001EA Minimal thermal effects! Super stability and high output whenever needed! 0 5 10 15 20 25 ●Temperature on irradiated surface IRRADIATED SURFACE TEMPERATURE (°C) RELATIVE INTENSITY (%) Higher LED temperatures cause the LED light output to drop and also shorten its service life. To suppress a temperature rise, users usually have to rely on measures such as feedback circuits and temperature sensors. Also, LED heads ●Light output stability that use ordinary heat-dissiTLSZB0013EA Continuous lighting with metal clamp used 100 pating fins cause the light 90 output to drift largely. 80 Hamamatsu UV-LED prod70 ucts do not have these 60 problems because our in50 genious heat dissipating 40 technology allows maintain30 ing a constantly stable light 20 output with just a small 10 clamping jig. 0 TLSZB0012EB 80 70 4000 mW/cm2 60 3000 mW/cm2 50 2000 mW/cm2 40 1000 mW/cm2 30 20 · L10561-410 · Irradiation Target: Glass Substrates · Irradiation Distance: 10 mm 10 0 0 10 20 Power-saving – Requires only 8 W. 50 60 No fan allows confident operation in a clean room. ■ Reduces CO2 ■ Saves energy Eco-friendly 40 IRRADIATION TIME (sec) TIME (min) ■ 30 30 Maintenance Vibration External control to meet every need. MIL connectors RS-232C Terminal block SPECIFICATIONS Parameter Maximum UV irradiance 1 Peak wavelength LED design life Input voltage (DC) Power consumption (Max.) Cooling method Operating temperature range Storage temperature range Operating / storage humidity range Control method * Applicable standards Warranty period 2 Less trouble LC-L2 Dust 365 nm 14000 365 ± 5 385 nm 15000 385 ± 5 20000 12 to 24 8 Air cooling without fan +5 to +35 -10 to +60 Below 80 % (no condensation) External control / communication control IEC61010-1: 2010 IEC62471: 2006 Risk Group3 IEC61326-1: 2005 Group1 ClassA 1 year Unit mW/cm2 nm h V W — °C °C — — — — 1With an LED head unit L10561- 10 connected, UV intensity in the emission center was measured a point 10 mm away from the end of the output lens. 2The warranty period is 1 year from the date of shipment. * Control description External control · Manual / auto irradiation · Light intensity setting · Error signal Communication control · Manual / auto irradiation · Light intensity / time setting · Integration time check and reset · Error signal UV-LED MODULE Irradiance distributions (typical examples at 365 nm) Wavelength ●Light emission spectrum ●Standard type TLSZB0021EA 100 Irradiation area: 3 mm 70 IRRADIANCE (mW/cm2) RELATIVE OUTPT (%) 80 60 50 40 30 20 10 0 300 350 400 14000 mW/cm2 TLSZB0060EB 365 nm 385 nm 90 450 WAVELENGTH (nm) 16000 15000 14000 13000 12000 11000 10000 9000 8000 7000 6000 5000 4000 3000 2000 1000 0 -10 -8 -6 -4 -2 0 2 4 6 8 10 DISTANCE FROM IRRADIATED CENTER (mm) Irradiation area: 6 mm Irradiation pattern variation 7000 ●Standard type 6500 mW/cm2 TLSZB0061EB 10 mm 10 mm 10 mm 10 mm 15 mm 15 mm 15 mm 15 mm 20 mm 20 mm 20 mm 20 mm 25 mm 25 mm 25 mm 25 mm 30 mm 30 mm 30 mm 30 mm Irradiation area: 3 mm Irradiation area: 6 mm Irradiation area: 8 mm Irradiation area: 12 mm IRRADIANCE (mW/cm2) 6000 5000 4000 3000 2000 1000 0 -10 -8 -6 -4 -2 0 2 4 6 8 10 DISTANCE FROM IRRADIATED CENTER (mm) ●Right-angle type Irradiation area: 8 mm 4500 4000 10 mm 20 mm 25 mm 30 mm The right-angle type allows attaching the LED head even in narrow spaces to give more position freedom during installation. IRRADIANCE (mW/cm2) 15 mm 4000 mW/cm2 TLSZB0062EB ●Linear beam type 3500 3000 2500 2000 1500 1000 500 10 mm 10 mm 15 mm 15 mm 20 mm 20 mm 25 mm 25 mm Y Y X 1200 X ●Collimator type -4 -2 0 2 4 6 8 10 1000 mW/cm2 TLSZB0059EB 1100 1000 IRRADIANCE (mW/cm2) This type provides high irradiance by focusing the light beam more narrowly than type on left. -6 Irradiation area: 12 mm Narrow range type This type irradiates a wide-range light beam in a long elliptical pattern making it ideal for simultaneous UV curing of multiple or irregularshaped workpieces. -8 DISTANCE FROM IRRADIATED CENTER (mm) 30 mm 30 mm Wide range type 0 -10 900 800 700 600 500 400 300 200 100 10 mm 15 mm 20 mm 25 mm 30 mm 35 mm 40 mm * See last page for model No. The collimator type constantly maintains high irradiance regardless of irradiation distance and so does not require clamping jigs of high positioning accuracy. This helps ensure smooth and stable production. 0 -10 -8 -6 -4 -2 0 2 4 6 8 10 DISTANCE FROM IRRADIATED CENTER (mm) Z: Distance from end of lens Z=10 mm Z=25 mm Z=15 mm Z=30 mm Z=20 mm UV-LED MODULE Connection example Options (sold separately) ●LED DRIVER HARNESS: A10609-005F ●CONTROL BOX CABLE: A10611-005 This harness connects a LED driver to the LED driver hub unit. This cable connects the control box to the LED driver hub unit. Basic Configuration Options (sold separately) LED HEAD UNIT: L10561 / L10906 SERIES MASTER SLAVE ERROR READY OFF READY Operating the basic unit (LED head unit & driver) only requires supplying 12 to 24 Vdc and control signal. ERROR READY OFF READY LED DRIVER: C10559-01 CONTROL BOX CH DATA h x10h x100h ERR. STATUS SEC. % HOUR TIMER POWER MASTER SLAVE UP DOWN SAVE CH1 CH2 CH3 CH4 ●DRIVER HUB UNIT: C10558 SERIES ALL EMISSION SEITCH This is a driver hub unit specifically designed for the C10559 series. A maximum of 4 drivers can be connected. ●CONDENSER LENS UNIT: E9615 SERIES ●DRIVER HUB HARNESS: A10610-005 ●CONTROL BOX: C10608-01 We design lenses to meet your specific needs. This harness connects an expansion LED driver hub unit to the LED driver hub unit. This control box operates the LED head unit connected to the driver hub unit. TLSZC0002EC DIMENSIONAL OUTLINES (Unit: mm) ●LED driver C10559-01 LED HEAD UNIT L10561 SERIES CONNECTION TERMINAL INDICATOR ●Condenser lens E9615 series (sold separately) POWER / CONTROL TERMINAL (MIL type 16-pin connector) 9 6 40 LED DRIVER M11 × 0.5 REAR VIEW Weight: Approx. 2 g 2-M3 DEPTH: 8 MOUNTING SCREW 89 Weight: Approx. 130 g BOTTOM VIEW TLSZA0003EA TLSZA0001EA ●LED head unit L10561 / L10906 series 150 Irradiation area can be changed as needed by combring with the standard type LED head unit (12 mm dia.) L10561- 00. 25 15 Mounting holder 69 A 1500 15 2 21.5 15 26 120 SIDE VIEW 12 12 Type No. L10561L10561L10561L10561L10906L10906L10906L10906- Irradiation pattern variation 10 * 15 * Standard type 20 * 00 01 Collimator type 03 Right-angle type 02 Linear Wide range type beam 04 Narrow range type type 2-M3 HEX SOCKET HEAD BOLT SIDE VIEW FRONT VIEW Irradiation Mounted Dimencondenser sionA Weight area (g) lens (mm) (mm) 3 6 8 12 9 6 20 × 6 12 × 4 E9615-010 E9615-015 E9615-020 — — — — — 61 61 61 55 61 70 51 62 13 20 FRONT VIEW Irradiation Lens holder area (mm) color Silver 3 E9615-010 Blue 6 E9615-015 Black 8 E9615-020 Custom-made condenser lenses are available upon request. Type No. 12 Approx. 104 Approx. 104 Approx. 104 Approx. 102 Approx. 104 Approx. 110 Approx. 102 Approx. 104 70 Only L10906- 03 15 * This is the model No. including the L10561- 00 and condenser lens E9615 series. Replacing the condenser lens with the E11923 series allows changing the irradiation area. Type No. in " " 4: 365 nm 5: 385 nm 2-M3 DEPTH: 6 BOTTOM VIEW This holder comes with the LC-L2 and must always be used to enhance heat dissipation. TLSZA0002EB Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2014 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TLSZ1002E07 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected] JUN. 2014 IP China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]