Series FT Touch Screens Toggles Resistive Touch Screens Rockers 5-Wire, 4-Wire & Digital Solutions Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons NKK’s transparent touch screens are engineered to complement the application of choice while offering superior durability and flexibility. With options in multiple sizes, and choices of input by finger, gloved finger or stylus, we maintain a consistent focus on impeccable quality and value added solutions with the diverse needs of our customers at the forefront. Whether an application requires the 5- or 4-wire technology, the features include metal tails (analog), contact reliability with a connector, and ANR film, eliminating many of the typical visual artifacts. The film surface is non-glare and hard coated for ease of use and integrity of the surface. Additional benefits of NKK’s 5-wire touch screens include: • Screens highly resistant to static electricity and noise pollution • Drift-free operation despite any temperature fluctuation • Greater touch point density translating to more precision and reduction of false actuations • Quicker response time • Wide Range of Available Sizes APPLICATIONS L • Information Kiosks • Medical Equipment • Digital and Analog Solutions • Industrial Automation • Hand-held Devices • Controllers Available • Banking, Exchange Management Systems • Hospitality and Restaurant • Broadcast • Gaming Accessories • Design Minimizes Visual Artifacts • Office Automation Supplement • Anti-Newton Ring (ANR) Technology for Analog Touch Screens Indicators • Custom Solutions a Specialty • RoHS Compliant www.nkk.com Touch DISTINCTIVE CHARACTERISTICS L3 Series FT Rockers Toggles Customization Options Programmable Illuminated PB Pushbuttons Parameter Notes & Options Resistive Analog Touch Screen 4-Wire or 5-Wire Integrate LCD & Touchscreen Yes - No 5-Wire - Screen Size Diagonal Inches Standard 10.4, 12.1, 15 (min 10.4, max 19) 4-Wire - Screen Size Diagonal Inches Standard 5.7, 6.5, 8.4, 10.4, 12.1, 15 (min 2.5, max 19) Data Entry Area mm x mm Same as the dimensions of the display area of the LCD Viewable Area mm x mm Same as the dimensions of the bezel opening of the LCD Tilt Tactiles Slides Rotaries Keylocks Perimeter Dimensions mm x mm Tail Type PCB standard, FPC option Tail Pitch 1.25mm is standard Tail Pins 8 is standard, 4 is option Tail Length 2 standard options: 65mm or 80mm Tail Base Width 28.2mm is standard Tail Location Left side is standard, non-std options top or bottom Tail Material Carbon-coated silver is standard, option is copper-gold Glass Thickness 1.1 and 1.8mm are standard (note: total thickness = glass thickness + 0.3mm) Hardcoat Treatment Standard Anti-Newton Ring Treatment Standard Optical Transmission Factor 80% is standard Controller Yes - No (no = customer will supply) Communication USB or RS232 Operating System Windows 7 or Windows XP L Supplement Accessories Indicators Touch Touch Screens L4 www.nkk.com Toggles Series FT 4-Wire Touch Screens GENERAL SPECIFICATIONS FOR 4-WIRE Rockers 4-Wire Analog Resistive Touch Screens Pushbuttons Optical Light Transmission Analog: 80% standard Digital: 78% standard Film Options Anti-glare, anti-Newton ring standard Programmable Illuminated PB Electrical Power Level 1mA @ 5V DC (resistive load) Insulation Impedance 10MΩ minimum @ 25V DC Linearity 3% maximum (analog) Chattering Time 10 milliseconds maximum Mechanical Touch Activation Force 1.4N maximum Available Sizes 5.7” ~ 15” standard Durability Surface Hardness Expected Operational Life Keylocks Analog FTAS00-57AS4 2H (JIS K5600) 1,000,000 operations minimum Operating Temperature Range –10°C ~ +60°C (+14°F ~ +140°F) Storage Temperature Range –20°C ~ +70°C (–4°F ~ +158°F) Relative Humidity +60°C (+140°F), humidity 90%, 240 hours Slides Rotaries Environmental Tactiles PART NUMBERS & DESCRIPTIONS FOR 4-WIRE Key Area Dimensions Viewing Area Dimensions External Dimensions FTAS00-57AS4 5.7 4.54” x 3.40” (115.2mm x 86.4mm) 4.76” x 3.61” (121.0mm x 91.6mm) 5.16” x 3.98” (131.0mm x 101.0mm) FTAS00-65AS4 6.5 5.20” x 3.90” (132.0mm x 99.0mm) 5.43” x 4.13” (138.0mm x 105.0mm) 5.91” x 4.57” (150.0mm x 116.0mm) FTAS00-84AS4 8.4 6.73” x 5.10” (170.9mm x 129.6mm) 6.95” x 5.33” (176.5mm x 135.4mm) 7.34” x 5.69” (186.5mm x 144.4mm) Length 3.15” (80.0mm) FTAS00-104AS4 10.4 8.32” x 6.24” (211.2mm x 158.4mm) 8.47” x 6.39” (215.0mm x 162.4mm) 8.88” x 6.75” (225.6mm x 171.4mm) Length 3.15” (80.0mm) Indicators FTAS00-104AV4 10.4 8.35” x 6.28” (212.2mm x 159.4mm) 8.52” x 6.43” (216.4mm x 163.4mm) 8.92” x 7.21” (226.5mm x 183.0mm) FTAS00-121A4 12.1 9.72” x 7.30” (246.76mm x 185.32mm) 10.04” x 7.53” (255.0mm x 191.32mm) 10.67” x 8.07” (271.0mm x 205.0mm) FTAS00-121AS4 12.1 9.69” x 7.26” (246.0mm x 184.5mm) 9.84” x 7.42” (250.0mm x 188.5mm) 10.28” x 7.80” (261.0mm x 198.0mm) Length 3.15” (80.0mm) FTAS00-150A4 15.0 12.05” x 9.06” (306.1mm x 230.1mm) 12.21” x 9.25” (310.0mm x 235.0mm) 12.91” x 9.84” (328.0mm x 250.0mm) Length 3.15” (80.0mm) Supplement Touch Tilt Part Number Accessories 4-Wire Analog Touch Screens Screen Size in Inches L .055” (1.4mm) .083” (2.1mm) * Terminal Detail 8 Pin .049” (1.25mm) Pitch Length 2.56” (65.0mm) Length 2.56” (65.0mm) Length 3.15” (80.0mm) Length 3.15” (80.0mm) * 4 pin available with 1.0mm or 1.25mm pitch. Contact factory for details. Note: Input methods are finger or stylus. L8 Panel Thickness www.nkk.com Series FT Toggles 4-Wire Touch Screens A B Viewable Area C Active Area 4-Wire with Horizontal Tail (1.5) Air Vent .059 Pin 1 D E F XRI X LE (11.25) ±0.1 .443 (0.8) Typ .031 Pushbuttons YUP Center of Active Area Pin 8 Programmable Illuminated PB (10.0) .394 (1.25) Typ (5.0) .049 .197 (70.0) 2.76 (60.0) 2.36 Rockers (80.0) ±1 3.15 (28.2) 1.11 (0.5) .020 Reinforcement Film (16x24) Y LO G Center of Active Area (65.0) ±1 2.56 Keylocks FTAS00-57AS4 FTAS00-65AS4 Pin 1 Rotaries (10.0) .394 Tail Dimensions for (55.0) 2.17 (45.0) 1.77 Pin 8 Insulation Film YUP 1 XLE XRI 8 YLO XLE, XRI: Top Electrode Terminal YUP, YLO: Bottom Electrode Terminal Slides Reinforcement Film Stiffener H Bottom Electrode Pins Signal 1,2 YUP 3,4 YLO 5,6 XLE 7,8 XRI Tactiles Tail (0.3) ±0.05 .012 Top Electrode Tilt Contact Side Dim B Viewable Area Dim C Active Area Dim D Dim E Viewable Area Dim F Active Area Dim G Center of Active Area Dim H FTAS00-57AS4 5.7 5.16” (131±0.3mm) 4.76” (121mm) 4.54” (115.2mm) 3.40” (86.4mm) 3.61” (91.6mm) 3.98” (101±0.3mm) 2.65” (67.25mm) .055” (1.4mm) FTAS00-65AS4 6.5 5.91” (150±0.3mm) 5.43” (138mm) 5.20” (132mm) 3.90” (99mm) 4.13” (105mm) 4.57” (116±0.3mm) 3.03” (77mm) .055” (1.4mm) FTAS00-84AS4 8.4 7.34” (186.5±0.3mm) 6.95” (176.5mm) 6.73” (170.9mm) 5.10” (129.6mm) 5.33” (135.4mm) 5.69” (144.4±0.3mm) 3.73” (94.85mm) .083” (2.1mm) FTAS00-104AS4 10.4 8.88” (225.6±0.3mm) 8.46” (215mm) 8.31” (211.2mm) 6.24” (158.4mm) 6.39” (162.4mm) 6.75” (171.4±0.3mm) 4.49” (114.1mm) .083” (2.1mm) FTAS00-121AS4 12.1 10.28” (261±0.3mm) 9.84” (250mm) 9.69” (246mm) 7.26” (184.5mm) 7.42” (188.5mm) 7.80” (198±0.3mm) 5.18” (131.6mm) .083” (2.1mm) FTAS00-150A4 15.0 12.91” (328±0.3mm) 12.20” (310mm) 12.05” (306.1mm) 9.06” (230.1mm) 9.25” (235mm) 9.84” (250±0.3mm) 6.52” (165.6mm) .083” (2.1mm) www.nkk.com L9 L Indicators Dim A Accessories Screen Size in Inches Supplement Part Number Touch 4-Wire Analog Touch Screen Dimensions Series FT Toggles 4-Wire Touch Screens 4-Wire with Vertical Tail Rockers FTAS00-104AV4 (11.25) ±0.1 .443 (0.3) ±0.05 .012 Contact Side Pushbuttons (1.25) Typ .049 (5.0) .197 (0.8) Typ .031 (0.5) .020 Stiffener (10.0) .394 Pin 8 Pin 1 (60.0) 2.36 Tail (28.2) 1.11 Programmable Illuminated PB Insulation Film (70.0) 2.76 (80.0) ±1 3.15 Reinforcement Film (16X24) Reinforcement Film YUP Top Electrode Rotaries Bottom Electrode X RI X LE Keylocks (94.5) 3.72 Slides Center of Active Area Tactiles YLO (2.1) ±0.2 .083 (1.5) Air Vent .059 (114.5) Center of Active Area 4.51 (212.2) Active Area 8.35 (216.4) Viewable Area 8.52 (226.5) ±0.3 8.92 Tilt Touch (159.4) (163.4) 6.28 6.43 L Pins Signal 1,2 YUP 3,4 YLO 5,6 XRI 7,8 XLE Supplement Accessories Indicators 8 L10 www.nkk.com 1 YUP XLE XRI YLO XLE, XRI: Top Electrode Terminal YUP, YLO: Bottom Electrode Terminal (183.0) ±0.3 7.20 Series FT Toggles 4-Wire Touch Screens 4-Wire with Horizontal Tail (Off-Center) (271.0) ±0.3 10.67 (255.0) Viewable Area 10.04 (246.76) Active Area 9.71 Pushbuttons Rockers FTAS00-121A4 Programmable Illuminated PB (1.5) Air Vent .059 Y UP (102.25) 4.03 (80.0)±1 3.15 (70.0) 2.76 (60.0) 2.36 (10.0) .394 (1.25)Typ (5.0) .049 .197 X LE X RI Pin 1 (185.32) (191.32) (205.0) ±0.3 7.30 7.53 8.07 Keylocks Center of Active Area (11.25) ±0.1 .443 (0.8) Typ .031 Pin 8 (28.2) 1.11 (0.5) .020 Rotaries Reinforcement Film (16X24) Slides Y LO (140.0) Center of Active Area 5.51 Insulation Film (2.1) ±0.2 .083 Tail Reinforcement Film Bottom Electrode Tilt Stiffener YUP 1 XLE XRI 8 YLO Signal 1,2 YUP 3,4 YLO 5,6 XLE 7,8 XRI L Accessories Indicators XLE, XRI: Top Electrode Terminal YUP, YLO: Bottom Electrode Terminal Pins Supplement (0.31) ±0.05 .012 Top Electrode Tactiles Contact Side Touch (107.25) 4.22 www.nkk.com L11 Toggles Series FT Controllers & Drivers 4-Wire Touch Screen Controller Boards & Drivers Rockers DISTINCTIVE CHARACTERISTICS • High Quality and Reliability • Easy Integration Replacing Mouse Functionality Pushbuttons • Compatible with Control Board USB/RS232C • Device Driver Compatible with Vista and Windows XP Operating Systems Programmable Illuminated PB NKK offers controller boards compatible with USB or with RS232C. See web site or contact factory for specifications and technical data. Controller Boards Available for RS232C Keylocks Controller Boards Communication Protocol 4-Wire FTCS04B RS232C 4-Wire FTCU04B USB IC & Accessories Tactiles DISTINCTIVE CHARACTERISTICS OPTIONAL ACCESSORIES • Interface: USB and RS232C AT713 Receptacle Connector • High Speed and Accuracy This Receptacle Connector with code connects to RS232C communication of the controller boards. It is compatible with FTCS04A and FTCS04A2. • Built-in Calibration Function • Data Function Removal Built In to Eliminate Noise Tilt Touch Part No. See web site for dimensioned drawings or technical data for any of the controller boards and drivers. Slides Rotaries Controller Boards Available for USB Type L IC FTCSU564 Supplement Accessories Indicators AT714 Receptacle Connector AT714 is a Receptacle Connector with code to connect to power source of the control boards. The IC is for use with the 5- and 4-wire transparent touch screens, and is available for those who prefer to design their own controller boards. When the screen is touched, it recognizes the position of the touch by the level of analog voltage detected by the A/D. The A/D converter receives the value and sends a set of coordinate values as serial data or USB. For more details and dimensioned drawings of the accessories, go to the web site or call our engineering support personnel. See web site or contact factory for IC specifications. L12 www.nkk.com Toggles Series FT Storage, Handling & Installation Below are some general precautions for the 5-wire & 4-wire touch screen devices. Please check web site for complete documentation. Installation (4-wire, 5-wire) Programmable Illuminated PB Pushbuttons Rockers • Do not pull on the tail. Do not apply stress to the tail area. • Avoid vibration or shock. • The touch screen mounting should not be loose. • Ensure there are no burrs around the edges of the case or housing that can cause false actuation. The edges of the case or housing should not enter the keying area. • The case or housing and upper electrode should have a space of about 0.5 mm to accommodate expansion or shrinkage due to humidity variances. If a shock barrier is used do not press hard on the upper electrode area. Any shock barrier should be installed more than 0.6 mm above the screen. • To secure the touch screen, secure the lower portion with an item such as the LCD display panel. Do not secure the upper electrode with double-sided tape or similar items to avoid stress that can damage the upper or lower electrode. • In order to balance upper and lower pressure, an air vent may be installed. Ensure that no liquid or oil will enter into the device. Handling Precautions (4-wire, 5-wire) Keylocks • When opening product, take precaution with up/down and front/back directions. Glass edges are not chamfered, corners or edges can be sharp. Wear gloves when handling the product. • Do not pick up the product by the tail or pull the tail area. • Use gloves or finger cots to prevent fingerprints on surface. • When handling the product, hold it outside of the viewing area. • Avoid stacking multiple products or placing other items on the product. • Remove protective film after installation is completed. Operating Precautions (4-wire, 5-wire) Rotaries • Only operate with fingers or a touch screen stylus. • Do not press hard with pen or similar objects between viewing area and key area. Design Precautions (4-wire, 5-wire) Slides • With analog type, resistive value change can dislocate the input area. Input area can be calibrated with software. •When installing on top of a LCD, noise from the display device can create misoperation. To avoid noise, implement actions such as grounding the display device frame. • Do not create software for simultaneous touch points as analog type will read the center point between two touch points. • When used to draw a line, analog type will have a break at dot spacer. Compensate for this with software. Other Precautions (4-wire, 5-wire) Handling Precautions (5-wire) • NKK warranties the 5-wire touch panel when it is used with the NKK control board and driver. Do not use third party control boards. • 5-wire devices can misalign cathode position or touch position even after calibration. See web site for details. • Create a larger input area. If you have the input button at the edge of a screen, it might not operate properly. • Complete 9 point calibration with NKK driver. If more precision is desired, 25 point calibration is recommended. L Touch Tilt Tactiles • Clean with a soft cloth and ethanol. Do not use any cleaning agents other than ethanol. • Store product in original package and store at the temperature and humidity range specified. • Do not store in an environment with acids or other corrosive gases or dew. • Not suited for use in critical control systems such as nuclear power, aerospace, medical or transportation equipment, without proper failsafe design consideration. Handling of Controller Board (5-wire) www.nkk.com Supplement Accessories Indicators • Warranty for one year after delivery. We do not warranty the controller board unless used with NKK touch panel. • Use arc prevention to protect device from static electricity. • Power source should be activated after host and touch panel are connected. • When inserting connector CN1 and touch panel tail, be sure the slider of connector CN1 is pulled. Do not pull more than 10 times. • Do not alter the product. • Do not use any commands other than the ones specified in specifications. • Place the product away from noise source (such as inverter from LCD operation) since tail can be affected by noise. • If device driver (USB) does not work after installation, reboot the host computer while connected to the controller board. • This product does not support suspended mode (USB). • Protocol of USB transmission is one frame per one transaction. • Contact factory if not using protocol above. L13