Download Specifications

Toggles
Series FB & SB
Momentary Pushbuttons
Rockers
General Specifications
FB Series
Tilt
Tactiles
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Electrical Capacity (Resistive Load)
C
Power Level:
Logic Level: Other Ratings
Contact Resistance: Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Travel:
Materials & Finishes
Plunger:
Bushing:
Case:
Movable Contactor:
Stationary Contacts:
Terminals:
Touch
SB Series
500mA @ 125V AC for silver
0.4VA max. @ 28V AC/DC max. for gold
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation in
Supplement section.
3A @ 125V AC or 2A @ 250V AC or
2A @ 30V DC for silver
0.4VA max. @ 28V AC/DC max. for gold
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find explanation of operating range in
Supplement section.
30 milliohms maximum for silver;
30 milliohms maximum for gold
100 megohms minimum @ 500V DC
1,000V AC minimum between contacts &
between contacts & case for 1 minute minimum
50,000 operations minimum
50,000 operations minimum
2.16N
Pretravel .043” (1.1mm)
Overtravel .022” (0.57mm)
Total Travel .065” (1.67mm)
10 milliohms maximum for silver;
20 milliohms maximum for gold
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts
& between contacts & case for 1 minute minimum
30,000 operations minimum
10,000 operations minimum
4.90N
Normally Open
Total Travel .088” (2.24mm)
Normally Closed
Total Travel .088” (2.24mm)
Polyacetal
Brass with nickel plating
Phenolic resin
Copper with silver or gold plating
Phosphor bronze with silver or gold plating
Phosphor bronze with silver or gold plating
Phenolic resin
Brass with nickel plating
Phenolic resin
Copper with silver or gold plating
Copper with silver or gold plating
Copper with silver or gold plating
Environmental & Installation Data
Operating Temp Range: –10°C through +70°C (+14°F through +158°F)
Soldering Time & Manual Soldering:
Temperature: See Profile A in Supplement section.
Standards & Certifications
UL: File No. E44145 - Recognized only when
ordered with marking on switch.
Add “/U” or “/CUL” before dash in part
number to order UL recognized switch.
Models rated 0.5A @ 125V AC Single pole;
Momentary action circuit with solder lug
terminations.
CSA:
Supplement
Accessories
Indicators
C38
www.nkk.com
–10°C through +70°C (+14°F through +158°F)
Manual Soldering:
See Profile A in Supplement section.
File No. E44145 - Recognized only when ordered
with marking on switch.
Add “/U” or “/CUL” before dash in part number to
order UL recognized switch.
Models rated 3A @ 125V AC & 2A @ 250V AC.
Single pole: Momentary action circuit with solder lug
terminations.
File No. 023535_0_000 - Certified only when
ordered with marking on switch.
Add “/C” before dash in part number to order CSA
certified switch.
SB series rated 3A @ 125V AC & 2A @ 250V AC.
Single pole: Momentary action circuit with solder lug
terminations.
Toggles
Series FB & SB
Momentary Pushbuttons
Optional caps in different colors to vary appearance
as needed.
C
Programmable Illuminated PB
Low operating force for ease of actuation.
Pushbuttons
Rockers
Distinctive Characteristics
Rear panel bushing mount with compact
behind panel dimension.
Internal antijamming feature to protect the
contacts from damage due to excessive
force on the plunger.
Keylocks
Self-cleaning contacts make FB models highly
reliable.
Rotaries
Low cost device of rugged one-piece bushing
and housing construction.
Reliability of construction with an internal guide to
maintain contact alignment.
Tilt
Tactiles
Slides
Epoxy sealed terminals.
Page C40
SB Bushing Mount
Page C42
Accessories
FB Bushing Mount
Indicators
Touch
Actual Size SB
Supplement
Actual Size FB
www.nkk.com
C39
Series FB
Toggles
.5 Amp Momentary Pushbuttons
TYPICAL SWITCH ORDERING EXAMPLE
15AN
EP
2
F
A
C
Pole & Circuit
Programmable Illuminated PB
Pushbuttons
Rockers
FB
15AN SPST OFF
Contact Materials & Ratings
(ON)
( ) = Momentary
2
Silver Contacts
500mA @ 125V AC
4
Gold Contacts
0.4VA max. @ 28V AC/DC max.
Cap Colors
A
Black
B
White
C
Red
Keylocks
IMPORTANT:
EP
Epoxy Sealed PC/Turret
P
No Epoxy PC/Turret
Slides
Rotaries
Terminals
Caps
Switches are supplied without UL &
cULus marking unless specified.
UL & cULus recognized only when
ordered with marking on the switch.
Specific models, ratings, & ordering instructions are noted on General Specifications page.
F
.201” (5.1mm) Dia.
H
.295” (7.5mm) Dia.
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Tactiles
FB15ANEP2-FA
.201” (5.1mm) Diameter
Black Cap
SPST
OFF-(ON) Circuit
Tilt
Silver Contacts &
500-Milliamp Rating
Touch
Epoxy Sealed
PC/Turret Terminals
Indicators
POLE & CIRCUIT
Plunger Position
( ) = Momentary
Supplement
Accessories
Normal
Pole
Model
SP
FB15AN
C40
Down
Connected Terminals
Normal
Throw & Switch Schematics
Down
Note: Terminal numbers are
not actually on the switch.
OFF
(ON)
OPEN
www.nkk.com
1-2
SPST
1
2
Series FB
Toggles
.5 Amp Momentary Pushbuttons
TERMINALS
No Epoxy
PC/Turret Terminals
Rockers
P
CONTACT MATERIALS & RATINGS
Silver Contacts
Power Level
500mA @ 125V AC
4
Gold Contacts
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Programmable Illuminated PB
C
2
Complete explanation of operating range in Supplement section.
TYPICAL SWITCH DIMENSIONS
PC/Turret
(4.0)
.157
(5.1) Dia
.201
M5 P0.5
(1.2)
.047
(0.15) Typ
.006
(5.0)
.197
(2.7)
.106
(2.54)
.100
(11.8)
.465
Slides
(5.9) (4.0)
.232 .157
(7.0) Dia
.276
Rotaries
(5.0) Dia
.197
(2.8) Dia
.110
Plunger is white polyacetal.FB15ANEP2-FA
H
(5.1) Dia
.201
(5.9)
.232
Material: Polyamide
AT496
.295” (7.5mm) Diameter
(7.5) Dia
.295
(4.0)
.157
Finish: Glossy
Material: Polyamide
(5.9)
.232
Tilt
AT475
.201” (5.1mm) Diameter
Tactiles
SLIP-ON CAPS & COLORS
F
Pushbuttons
Epoxy Sealed
PC/Turret Terminals
Keylocks
EP
(4.0)
.157
Touch
Finish: Glossy
A
Black
B
White
C
Red
Indicators
Colors Available:
M5 P0.5
AT536 Hex Nut
(7.0)
.276
Panel Thickness:
Accessories
STANDARD HARDWARE & PANEL CUTOUT
(5.3) Dia
.209
(8.0)
.315
Supplement
.110” (2.8mm) maximum
Material:
Brass with nickel plating
(1.2)
.047
www.nkk.com
C41
Series SB
Toggles
3 Amp Momentary Pushbuttons
TYPICAL SWITCH ORDERING EXAMPLE
11NO
M
C
Pole & Circuits
Plunger Colors
Normally Open
11NO
SPST
No Code
OFF
C
(ON)
Black
Red
Normally Closed
11NC
SPST
ON
Contact Materials & Ratings
No
Code
G
(OFF)
Silver Contacts
3A @ 125V AC or 2A @ 250V DC
Gold Contacts
0.4VA max. @ 28V AC/DC max.
( ) = Momentary
Bushings
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
SB40
M
Metric Threaded M12 P1
H
Inch Threaded 15/32-32 NS
Slip-On Cap & Colors
No Code
IMPORTANT:
Slides
Rotaries
Switches are supplied without UL,
cULus & CSA marking unless specified.
UL, cULus & CSA recognized only when
ordered with marking on the switch.
Specific models, ratings, & ordering instructions are noted on General Specifications page.
Without Cap
2A
Black
2B
White
2C
Red
2E
Yellow
2F
Green
2G
Blue
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Tactiles
SB4011NOM
Standard Black Plunger
without Slip-on Cap
Metric Threaded Bushing
Silver Contacts with
3-Amp Rating
Touch
Tilt
SPST OFF-(ON)
Normally Open Circuit
Supplement
Accessories
Indicators
POLE & CIRCUITS
Plunger Position
( ) = Momentary
Normal
Pole
SP
C42
Down
Connected Terminals
Normal
Throw & Switch Schematics
Down
Note: Terminal numbers are
not actually on the switch.
Model
SB4011NO
SB4011NC
OFF
ON
(ON)
(OFF)
OPEN
1-2
www.nkk.com
1-2
OPEN
SPST
NC
NO
1
2
1
2
Series SB
Toggles
3 Amp Momentary Pushbuttons
TYPICAL SWITCH DIMENSIONS
Metric Bushing
(8.4) Dia
.331
Rockers
(1.2) Dia
.047
M12 P1
(10.0) Dia
.394
(6.3)
.248
(7.3)
.287
(22.0)
.866
(0.6) Typ
.024
C
SB4011NOM
(1.2) Dia
.047
M12 P1
SB4011NOM
(10.0) Dia
.394
(9.0)
.354
(5.0)
.197
(6.3)
.248
(12.0) Dia
.472
(23.0)
.906
Panel Thickness:
.157” (4.0mm)
SB4011NCM
(10.0) Dia
.394
(6.3)
.248
(4.0)
.157
(2.2) Typ
.086
(7.3)
.287
(22.0)
.866
(0.6) Typ
.024
Tactiles
(12.0) Dia
.472
Inch Bushing
Slides
(8.4) Dia
.331
(10.4)
.410
Details in Hardware &
Accessories section.
(1.2) Dia
.047
15/32-32 NS
Keylocks
Hardware provided:
1 AT504 Knurled Face Nut
1 AT508 Lockwasher
1 AT527M Hex Mounting Nut
(12.5) Dia
.492
Rotaries
(8.4) Dia
.331
SB4011NOH
(1.2) Dia
.047
(8.4) Dia
.331
SB4011NCH
(10.0) Dia
.394
Hardware provided:
2 AT503H Hex Mounting Nuts
1 AT508 Lockwasher
(12.5) Dia
.492
(10.4)
.410
(12.0) Dia
.472
(6.3)
.248
(5.0)
.197
(23.0)
.906
Details in Hardware &
Accessories section.
Panel Thickness:
.157” (4.0mm)
SB4011NCH
Touch
15/32-32 NS
2C
Red
2F
Green
(6.0)
.236
2B
www.nkk.com
White
2E
Yellow
2G
Blue
Supplement
Material: Polyethylene
Finish: Matte
(8.8)
.346
Black
Accessories
2A
(10.0) Dia
.394
Indicators
SLIP-ON CAP & COLORS
AT422
.394” (10.0mm) Diameter Cap
Programmable Illuminated PB
(12.0) Dia
.472
(4.0)
.157
Tilt
(9.0)
.354
Pushbuttons
(2.2) Typ
.086
C43