MAMUCT0021 CATV Amplifier Splitter Module 50 - 860 MHz Features • • • • • • • • • RoHS Compliant Rev. V1 Functional Schematic Low Noise Figure Low Distortion Multifunction Integration Single Positive Supply 75 ohm Impedance Lead-Free Surface Mount Package Electroless Nickel Imersion Gold (ENIG) Finish 260°C Reflow Compatible RoHS* Compliant Version of MAMUSS0007 OUT3 OUT2 OUT1 Description M/A-COM’s MAMUCT0021 is an integrated module consisting of an amplifier and two equal split power dividers. The push-pull, low distortion, amplifier includes the baluns and DC bias circuitry. The device is ideally suited for use in the CATV market where low noise figure, low distortion and high linearity are required. Vdd IN Pin Configuration Ordering Information Pin No. Pin Name Description Part Number Package 1 GND Ground MAMUCT0021TR 500 Piece Reel 2 GND Ground 3 GND Ground 4 GND Ground 5 GND Ground 6 GND Ground 7 GND Ground 8 GND Ground MAMUCT0021SMB Sample Test Board (Includes 5 Samples) Absolute Maximum Ratings Parameter 1,2 Absolute Maximum Input Power +20 dBm 9 IN RF Input Operating Voltage +10 volts 10 GND Ground Operating Temperature -40°C to +85°C 11 VDD +5V -65°C to +150°C 12 GND Ground 13 OUT 1 RF Output 1 14 GND Ground 15 OUT 2 RF Output 2 16 GND Ground 17 OUT 3 RF Output 3 18 GND Ground Storage Temperature 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMUCT0021 CATV Amplifier Splitter Module 50 - 860 MHz RoHS Compliant Rev. V1 Electrical Specifications: TA = 25°C, Freq: 50 - 860 MHz, VDD = +5 Volts, Z0 = 75 Ω Parameter Test Conditions Units Min. Typ. Max. Gain IN-OUT1, IN-OUT2 dB 4 5 6.8 Gain IN-OUT3 dB 7.6 8.5 9.8 Gain Unbalance IN-OUT1 vs IN-OUT2 dB — 0.6 — Gain Flatness IN-OUT1/2 dB 0 1.1 1.6 Gain Flatness IN-OUT 3 dB 0 0.8 1 Noise Figure dB dB — — 3.7 3.4 — — Return Loss IN-OUT1, IN-OUT2 50 – 150 MHz 150 – 860 MHz IN-OUT 3 50 – 150 MHz 150 – 860 MHz IN dB dB dB — — — 3.4 3.0 15 — — — Return Loss OUT dB — 17 — Isolation OUT-OUT dB — 24 —- Noise Figure Composite Triple Beat, CTB 135 channels, +13 dBmV/channel at the input dBc — -78 -70 Composite Second Order, CSO 135 channels, +13 dBmV/channel at the input dBc — -78 -70 Cross modulation 135 channels, +13 dBmV/channel at the input dBc — -66 — IDD VDD = + 5 Volts mA — 200 225 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMUCT0021 CATV Amplifier Splitter Module 50 - 860 MHz RoHS Compliant Rev. V1 Typical Performance Curves Noise Figure In – Out 1 5 8 In to Out 1 In to Out 2 In to Out 3 -40°C +25°C +85°C 7 4 6 3 5 2 4 3 1 0 200 400 600 800 1000 0 200 Frequency (MHz) 400 600 800 1000 Frequency (MHz) In – Out 2 Isolation 40 8 -40°C +25°C +85°C 7 30 6 20 5 10 Out 1 to Out 3 Out 1 to Out2 Out 2 to Out 3 4 3 0 0 200 400 600 800 1000 Frequency (MHz) 0 200 400 600 800 1000 Frequency (MHz) In – Out 3 11 -40°C +25°C +85°C 10 9 8 7 6 0 200 400 600 800 1000 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAMUCT0021 CATV Amplifier Splitter Module 50 - 860 MHz RoHS Compliant Rev. V1 Typical Performance Curves Output Return Loss Input Return Loss 0 0 -5 -5 -10 -10 -15 -15 -20 -20 -25 -25 -30 -30 Out 1 Out 2 Out 3 -35 -35 0 200 400 600 800 1000 Frequency (MHz) Lead-Free Surface Mount Package3,4 0 200 400 600 800 1000 Frequency (MHz) Recommended Board Layout 3. All dimensions in mm. 4. Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.