PANASONIC AN5277

ICs for Audio Common Use
AN5277
Dual Channel SEPP Power Amplifier
■ Overview
Unit : mm
The AN5277 is a monolithic integrated circuit designed
for 10.0 W (26 V, 8 Ω)output audio power amplifier. It is
a dual channel SEPP IC suitable for stereo operation in
TV application.
(10.0)
29.6±0.3
(1.27)
+0.15
0.6 –0.05 (1.27)
R1.8
3.5±0.3
1.45±0.15
1
(1.2)
19.1±0.3
21.9±0.3
1.80±0.15
1.2±0.1
(12.5)
+0.10
0.25 –0.05 2.54
0.6
• Few external components :
• No Boucherot cells(output C, R)
• No Bootstrap Capacitors
• No Negative Feedback Capacitors
• Built-in muting circuit
• Built-in standby circuit
• Built-in various protection circuits (Load-short, thermal,
over-voltage and current)
• High ripple rejection(55 dB)
• Compatible with AN5275, AN5276
• Operating voltage range 10 ∼ 32 V(26 V typ.)
20.0±0.3
■ Features
φ3.6
(10.0)
29.75±0.30
28.0±0.3
(1.3)
12
7.7±0.3
HSIP012-P-0000A
■ Applications
• TV
■ Block Diagram
Att.
Protection circuit
Temperature
Over voltage
Over current
Load short
Att. con
12
ch.1 Out
Standby 11
10
VCC
GND 9
(Output)
8
Mute
7
ch.2 Out
6
N.C.
5
ch.2 In
GND 4
(Input)
3
RF
2
ch.1 In.
N.C.
1
Ripple
filter
1
AN5277
ICs for Audio Common Use
■ Pin Descriptions
Pin No.
Description
Pin No.
Description
1
N.C.
7
ch.2 Output
2
ch.1 Input
8
Mute
3
Ripple Filter
9
Output GND
4
Input GND
10
VCC
5
ch.2 Input
11
Standby
6
N.C.
12
ch.1 Output
■ Absolute Maximum Ratings
Parameter
Symbol
Ratings
Unit
VCC
35.0
V
ICC
4.0
A
PD
37.5
W
Topr
−25 to +75
°C
Tstg
−55 to +150
°C
Supply voltage
Supply current
Power dissipation
*2
Operating ambient temperature
Storage temperature
*1
*1
Note) *1 : Ta = 25 °C except operating ambient temperature and storage temperature.
*2 : At Ta = 70 °C.
■ Recommended Operating Range
Parameter
Supply voltage
Symbol
Range
Unit
VCC
10.0 to 32.0
V
■ Electrical Caracteristics at VCC = 26 V, RL = 8 Ω, f = 1 kHz, Ta = 25 °C
Parameter
Symbol
Conditions
Typ
Max
Unit
Quiescent current
ICQ
VIN = 0 mV

40
80
mA
Output end noise voltage *1
VNO
No input,RG = 10 k

0.22
0..4
mV
Voltage gain
GV
VIN = 57 mV
32
34
36
dB
THD
VIN = 57 mV

0.2
0.4
%
Total harmonic distortion *1
Maximum output power
PO
VCC = 26 V,THD = 10 %
8.0
10.0

W
Ripple rejection ratio *1
RR
VR = 1 Vrms,fR = 120 Hz, RG = 10 kΩ,
45
55

dB
Channel balance
CB
VIN = 57 mV
−1.0
0
1.0
dB
Muting ratio
MR
VIN = 57 mV
70
80

dB
Muting control voltage
VMUTE
VIN = 57 mV, MR≥70 dB
3.0


V
Standby control voltage 'on'
VSTDON
No input, ICC≤0.1 mA


5.0
V
Standby control voltage 'off' VSTDOFF
No input, ICC≥20 mA
8.5


V
Channel crosstalk
VIN = 57 mV,RG = 10 kΩ
50
60

dB
CT
Note) *1 : For this measurement, use the 20 Hz to 20 kHz(12 dB/OCT) filter.
2
Min
ICs for Audio Common Use
AN5277
■ Terminal Equivalent Circuit
Pin No.
Equivalent Circuit
1

Description
2
200 Ω
Pin2
5
400 Ω
DC Voltage
Not connected

ch.1 Input :
0V
This is the amplifier input pins.
30 kΩ
4
3
Ripple Filter :
10
VCC − 1.5 VBE
This is the pin to connect the positive
terminal of a ripple filter capacitor.
30 kΩ
3
20 kΩ
15 kΩ
15.7 kΩ
4
4

5
Refer to Pin2
6

7
10
Input GND :
Input ground pin.
0V
ch.2 Input :
This is the amplifier input pins.

Not connected

ch.2 Output :
VCC/2
ch.2 output pin
Driver Cct
Pre-amp.
7
600 Ω
30 kΩ
9
VCC/2
3
AN5277
ICs for Audio Common Use
■ Pin Equivalent Circuit (continued)
Pin No.
Equivalent Circuit
Description
8
Mute :
10
DC Voltage

Mute input pin.
Mute 'On' = 5 V
Mute 'Off' = 0 V
3 kΩ
3 kΩ
10 kΩ
8
200 Ω
4
9

Output GND :
ch.1 & ch.2 output ground.
10

VCC :
This is the power supply pin.
11
Standby :
10
0V
typ. : 26 V

This is the standby control pin.
11
5 kΩ
5 kΩ
3 kΩ
4
12
10
ch.1 Output :
ch.1 output pin
Driver Cct
12
30 kΩ
9
Pre-amp.
600 Ω
4
VCC/2
ICs for Audio Common Use
AN5277
■ Application Circuit Example
STB Off
STB On
11
STB
1 µF
VIN1
1 000 µF
10
VCC
3 R.F.
100 µF
VCC
VCC
2
12
1 000 µF
10 kΩ
SP
8Ω
7
1 µF
VIN2
1 000 µF
5
SP
8Ω
10 kΩ
5V
8.2 kΩ Mute 8
10 µF
VCC
STB 'On'
0V
Mute 'Off'
0V
Mute 'On'
5V
N.C.
Input
GND
N.C.
STB 'Off'
Output GND
6
9
1
Mute Off
4
Mute On
■ Usage Notes
1. External heatsink is needed when used. External heatsink should be fixed to the chassis.
2. Fin of the IC can be connected to GND.
3. Please prevent output to VCC short and output toGND short.
4. Load short protection will only prevent the IC from damaging if operating VCC<30 V
5. The temperature protection circuit will operate at Tj around 150 °C.
However, if temperature decrease, the protection circuit will automatically be deactivated and resume
normal operation.
5
AN5277
ICs for Audio Common Use
■ Technical Information
• PD  Ta Curves of HSIP012-P-0000A
PD  Ta
80
Power dissipation PD (W)
70
62.5 W
60
50
(1)
40
30
20.8 W
20
(2)
15.6 W
(3)
10
3.0 W
(4)
0
0
25
50
75
100
125
150
Ambient temperature Ta (°C)
1. TC = Ta,62.5 W(θj-c = 2 °C/W)
2. 20.83 W(θf = 4.0 °C/W)
With a 100 cm2 X 3 mm Al heat sink(black
colour coated)or a 200 cm2 X 2 mm Al
heat sink(not lacquered)
3. 15.63 W(θf = 6.0 °C/W)
With a 100 cm2 X 2 mm Al heat sink(not
lacquered)
4. 3.0 W at Ta = 25 °C(θj-a = 42 °C/W)
Without heat sink
6