TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors TELUX LED FEATURES • High luminous flux • Supreme heat dissipation: RthJP is 90 K/W • High operating temperature: Tamb = -40 °C to +110 °C • Meets SAE and ECE color requirements for the automobile industry for color red • Packed in tubes for automatic insertion • Luminous flux, forward voltage, and color categorized for each tube • Small mechanical tolerances allow precise usage of external reflectors or lightguides • Compatible with wave solder processes according to CECC 00802 and J-STD-020 • ESD-withstand voltage: up to 2 kV according to JESD 22-A114-B • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 19232 DESCRIPTION The TELUX series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed AllnGaP technology. The supreme heat dissipation of TELUX allows applications at high ambient temperatures. All packing units are binned for luminous flux, forward voltage, and color to achieve the most homogenous light appearance in application. SAE and ECE color requirements for automobile application are available for color red. APPLICATIONS • • • • • PRODUCT GROUP AND PACKAGE DATA • • • • Product group: LED Package: TELUX Product series: standard Angle of half intensity: ± 45° Exterior lighting Dashboard illumination Tail-, stop-, and turn signals of motor vehicles Replaces small incandescent lamps Traffic signals and signs PARTS TABLE PART COLOR LUMINOUS FLUX (mlm) MIN. TYP. MAX. at IF (mA) WAVELENGTH (nm) MIN. TYP. MAX. at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. at IF (mA) TECHNOLOGY TLWR7900 Red 1500 2800 - 70 611 618 634 70 1.83 2.2 2.67 70 AlInGaP on GaAs TLWY7900 Yellow 1000 2800 - 70 585 592 597 70 1.83 2.1 2.67 70 AlInGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLWR7900, TLWY7900 PARAMETER TEST CONDITION SYMBOL VALUE Reverse voltage (1) IR = 100 μA VR 10 V DC forward current Tamb ≤ 85 °C IF 70 mA tp ≤ 10 μs Surge forward current UNIT IFSM 1 A Power dissipation PV 187 mW Junction temperature Tj 125 °C Operating temperature range Tamb -40 to +110 °C Storage temperature range Tstg -55 to +110 °C Soldering temperature t ≤ 5 s, 1.5 mm from body preheat temperature 100 °C / 30 s Tsd 260 °C Thermal resistance junction / ambient With cathode heatsink of 70 mm2 RthJA 200 K/W RthJP 90 K/W Thermal resistance junction / pin Note (1) Driving the LED in reverse direction is suitable for a short term application Document Number: 83144 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLWR7900, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Total flux IF = 70 mA, RthJA = 200 K/W φV 1500 2800 - UNIT mlm Luminous intensity/total flux IF = 70 mA, RthJA = 200 K/W IV/φV - 0.7 - mcd/mlm Dominant wavelength IF = 70 mA, RthJA = 200 K/W λd 611 618 634 nm Peak wavelength IF = 70 mA, RthJA = 200 K/W λp - 626 - nm Angle of half intensity IF = 70 mA, RthJA = 200 K/W ϕ - ± 45 - deg Total included angle 90 % of total flux captured ϕ0.9 V - 100 - deg IF = 70 mA, RthJA = 200 K/W VF 1.83 2.2 2.67 V Forward voltage Reverse voltage Junction capacitance Temperature coefficient of λdom IR = 10 μA VR 10 20 - V VR = 0 V, f = 1 MHz Cj - 17 - pF IF = 50 mA TCλdom - 0.05 - nm/K OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLWY7900, YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Total flux IF = 70 mA, RthJA = 200 K/W φV 1000 2800 - UNIT mlm Luminous intensity/total flux IF = 70 mA, RthJA = 200 K/W IV/φV - 0.7 - mcd/mlm Dominant wavelength IF = 70 mA, RthJA = 200 K/W λd 585 592 597 nm Peak wavelength IF = 70 mA, RthJA = 200 K/W λp - 595 - nm Angle of half intensity IF = 70 mA, RthJA = 200 K/W ϕ - ± 45 - deg 90 % of total flux captured ϕ0.9 V - 100 - deg Forward voltage IF = 70 mA, RthJA = 200 K/W VF 1.83 2.1 2.67 V Reverse voltage IR = 10 μA VR 10 15 - V VR = 0 V, f = 1 MHz Cj - 32 - pF IF = 50 mA TCλdom - 0.1 - nm/K Total included angle Junction capacitance Temperature coefficient of λdom LUMINOUS FLUX CLASSIFICATION GROUP COLOR CLASSIFICATION LUMINOUS FLUX (mlm) STANDARD MIN. MAX. B 1000 1800 C 1500 2400 DOM. WAVELENGTH (nm) GROUP YELLOW RED MIN. MAX. 0 585 588 MIN. MAX. D 2000 3000 1 587 591 611 618 E 2500 3600 2 589 594 614 622 F 3000 4200 3 592 597 616 634 G 3500 4800 H 4000 6100 Note • Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each tube (there will be no mixing of two groups on each tube). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one tube. In order to ensure availability, single wavelength groups will not be orderable. Note • Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm. Document Number: 83144 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 Irel. - Relative Luminous Intensity 100 IF - Forward Current (mA) red, yellow 80 60 40 RthJA = 200 K/W 20 red 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 0.0 570 120 Tamb - Ambient Temperature (°C) 18019 Fig. 1 - Forward Current vs. Ambient Temperature 630 650 670 tp/T = 0.01 1000 IV rel. - Relative Luminous Intensity 1.2 red, yellow IF - Forward Current (mA) 610 Fig. 4 - Relative Intensity vs. Wavelength 10 000 Tamb ≤ 85 °C 0.02 0.05 0.1 100 1 10 0.2 0.5 1 0.01 1 0.8 0.6 0.4 0.2 540 100 10 tp - Pulse Length (ms) 0° 10° 20° 50° 0.8 60° 70° 80° 0.4 0.2 620 640 λ - Wavelength (nm) 90 IF - Forward Current (mA) 0.9 600 100 ϕ - Angular Displacement 40° 1.0 580 Fig. 5 - Relative Intensity vs. Wavelength 30° 0.7 560 16008 Fig. 2 - Forward Current vs. Pulse Length 0.6 yellow 1.0 0 0.1 18020 IV rel. - Relative Luminous Intensity 590 λ- Wavelength (nm) 16007 80 60 50 40 30 20 10 0 1.5 0 16200 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement red, soft orange 70 20180 1.7 1.9 2.1 2.3 2.5 VF - Forward Voltage (V) Fig. 6 - Forward Current vs. Forward Voltage Document Number: 83144 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors 100 yellow I Spec - Specific Luminous Flux IF - Forward Current (mA) 90 80 70 60 50 40 30 20 10 red 1.0 0.1 0 1.4 1.6 1.8 2.0 2.2 VF - Forward Voltage (V) 15975 1 2.4 10 Fig. 7 - Forward Current vs. Forward Voltage 100 IF - Forward Current (mA) 18022 Fig. 10 - Specific Luminous Flux vs. Forward Current I Spec - Specific Luminous Flux IV rel - Relative Luminous Intensity 10 red 1 0.1 1.0 0.1 0.01 1 10 1 100 IF - Forward Current (mA) 15978 15981 Fig. 8 - Relative Luminous Flux vs. Forward Current 10 100 I F - Forward Current (mA) Fig. 11 - Specific Luminous Flux vs. Forward Current 1.8 10 Φ V rel - Relative Luminous Flux yellow IV rel - Relative Luminous Intensity yellow 1 0.1 0.01 1 15979 10 IF - Forward Current (mA) 100 Fig. 9 - Relative Luminous Flux vs. Forward Current 1.6 red IF = 70 mA 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 18021 Fig. 12 - Relative Luminous Flux vs. Ambient Temperature Document Number: 83144 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors 2.0 yellow Φ V rel - Relative Luminous Flux 1.8 IF = 70 mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 15977 Fig. 13 - Relative Luminous Flux vs. Ambient Temperature 230 Padsize 8 mm2 per anode pin 220 RthJA (K/W) 210 200 190 180 170 160 0 50 100 150 200 250 300 Cathode Padsize (mm2) 16009 Fig. 14 - Thermal Resistance Junction Ambient vs. Cathode Padsize 100 % Total Luminous Flux 90 80 70 60 50 40 30 20 10 0 0 16201 25 50 75 100 125 Total Included Angle (Degrees) Fig. 15 - Percentage Total Luminous Flux vs. Total Included Angle for 90° Emission Angle Document Number: 83144 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Cathode marking technical drawings according to DIN specifications Area not plane 5° 1.35 ± 0.1 SR1.65 A 0.6 max. 2.65 ± 0.3 4.65 ± 0.3 7.75 ± 0.3 1.45 1.6 1.32 0.76 ± 0.1 0.4 ± 0.1 5.08 ± 0.3 1.55 ± 0.2 7.62 ± 0.3 6.55 5.08 ± 0.2 7.62 ± 0.3 Drawing-No.: 6.544-5321.01-4 Issue: 5; 25.07.14 Document Number: 83144 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors FAN FOLD BOX DIMENSIONS in millimeters Label 600 45 16491 110 Label LABEL OF FAN FOLD BOX (example) A. Type of component 106 B. Manufacturing plant A C. SEL - selection code (bin): e.g.: A = code for luminous intensity group 4 = code for color group H VISHAY 37 D. Date code year / week A E. Day code (e.g. 4: Thursday, A: early shift) F. Batch: no. B C D E F 20228 G G. Total quantity H. Company code EXAMPLE FOR TELUX TUBE LABEL DIMENSIONS in millimeters 90 52 A TLWR7600 PTC27 B C SELB10 D DC20000121 BN12345 E F PCS70 MNO G H 8 16490 A. Bar code B. Type of component C. Manufacturing plant D. SEL - selection code (bin): digit 1 - code for luminous flux group digit 2 - code for dominant wavelength group digit 3 - code for forward voltage group E. Date code F. Batch: no. G. Total quantity H. Company code Document Number: 83144 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 TLWR7900, TLWY7900 www.vishay.com Vishay Semiconductors TUBE WITH BAR CODE LABEL DIMENSIONS in millimeters Drawing-No.: 9.700-5223.0-4 Rev. 2; Date: 23.08.99 20438 Drawing Proportions not Scaled Document Number: 83144 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.8, 07-Oct-15 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000