PhotoMOS.book Page 159 Thursday, March 26, 2009 2:21 PM RF SSOP 1 Form A C×R5 (AQY221N3V) Super miniature SSOP Lower output capacitance and on resistance (C×R5) Load voltage 25V 4.45 .175 1.80 .071 2.65 .104 mm inch 1 4 2 3 RF SSOP 1 Form A C×R5 (AQY221N3V) FEATURES TYPICAL APPLICATIONS 1. Reduced package size Lower surface has been reduced 60% and mounting space 40% compared to conventional SOP4-pin type. 2. Lower output capacitance and onresistance Output capacitance (Cout): 1.0pF (typ.) ON resistance (Ron): 5.5Ω (typ.) 3. Mounting space has been reduced and output signals have been improved by using new flat lead terminals. 1. Measuring and testing equipment IC tester, Liquid crystal driver tester, Semiconductor performance tester, Board tester, etc. 2. Medical equipment Ultrasonic wave diagnostic machine 3. Multi-point recorder Warping, Thermo couple, etc. 4. Telecommunication and broadcasting equipment Conventional SOP SSOP Compliance with RoHS Directive Flat lead 4. High speed switching Turn on time: 0.02ms (typ.) Turn off time: 0.02ms (typ.) TYPES AC/DC dual use Output rating*1 Load voltage Load current 25 V 150 mA Package SSOP Tape and reel packing style Picked from the 1/4-pin side AQY221N3VY Picked from the 2/3-pin side AQY221N3VW Packing quantity in tape and reel*2 3,500 pcs. Notes: *1 Indicate the peak AC and DC values. *2 Tape and reel is the standard packing style for SSOP. For space reasons, only “N3V” is marked on the product as the part number. The three initial letters of the part number “AQY”, and the package (SSOP) indicator “V” and the packing style indicator “Y” or “W” are not marked on the relay. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY221N3V 50mA 5V 1A 75mW 25V 0.15A 0.4A 250mW 300mW 1,500V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f=100 Hz, Duty factor=0.1% Peak AC, DC 100 ms (1 shot), VL= DC Non-condensing at low temperatures All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 160 Thursday, March 26, 2009 2:21 PM RF SSOP 1 Form A C×R5 (AQY221N3V) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum Typical LED operate current Input LED turn off current LED dropout voltage On resistance Output Off state leakage current IFoff VF Ron Turn off time* I/O capacitance Initial I/O isolation resistance Condition IL = 80 mA IL = 80 mA IF = 50 mA IF = 5 mA, IL = 80 mA Within 1 s on time 7.5Ω 1.0 pF Cout IF = 0 mA, VB = 0 V f = 1 MHz 1.5 pF 0.01 nA ILeak Typical Maximum Typical Maximum Typical Maximum Minimum Turn on time* Transfer characteristics IFon Maximum Typical Maximum Typical Maximum Output capacitance AQY221N3V 1.0 mA 3.0 mA 0.2 mA 0.9 mA 1.35 V (1.14 V at IF = 5 mA) 1.5 V 5.5Ω IF = 0 mA VL = Max. 10 nA 0.02 ms Ton IF = 5 mA, VL = 10 V RL = 125Ω 0.2 ms 0.02 ms Toff IF = 5 mA, VL = 10 V RL = 125Ω 0.2 ms 0.8 pF Ciso f = 1 MHz VB = 0 V 1.5 pF 1,000MΩ Riso 500V DC Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales office in your area. *Turn on/Turn off time Input 90% 10% Output Toff Ton RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Input LED current Symbol IF Recommended value Unit 5 mA ■ For Dimensions ■ For Schematic and Wiring Diagrams ■ For Cautions for Use ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. For more information REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. Load current vs. Load voltage characteristics Ambient temperature: 25°C 77°F Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Load current: 80mA (DC) 200 25 150 100 50 On resistance, Ω 200 Load current, mA Load current, mA 3. On resistance vs. ambient temperature characteristics 150 100 20 15 10 50 5 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C 0 0 5 10 15 20 Load voltage, V 25 30 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 161 Thursday, March 26, 2009 2:21 PM RF SSOP 1 Form A C×R5 (AQY221N3V) 5. Turn off time vs. ambient temperature characteristics 6. LED operate current vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC) 0.1 0.08 0.08 0.06 0.04 2 LED operate current, mA 0.1 Turn off time, ms Turn on time, ms 4. Turn on time vs. ambient temperature characteristics 0.06 0.04 1.5 1 0.5 0.02 0 0.02 –40 –20 0 20 40 60 0 8085 –40 –20 Ambient temperature, °C 0 20 40 60 0 8085 –40 –20 Ambient temperature, °C 0 20 40 60 8085 Ambient temperature, °C 7. LED turn off current vs. ambient temperature characteristics 8. LED dropout voltage vs. ambient temperature characteristics 9. Current vs. voltage characteristics of output at MOS portion Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC) LED current: 5 to 50 mA Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F LED dropout voltage, V LED operate current, mA 1.5 1 0.5 Current, mA 1.5 2 1.4 150 100 50 1.3 –2 –1.5 –1 –0.5 50mA 1.2 0.5 30mA 20mA 1.1 1 1.5 2 Voltage, V –50 10mA –100 5mA 0 –40 –20 0 20 40 60 1.0 8085 –40 –20 0 20 40 60 –150 8085 100 Ambient temperature, °C Ambient temperature, °C 10. Off state leakage current vs. load voltage characteristics 11. Turn on time vs. LED forward current characteristics 12. Turn off time vs. LED forward current characteristics Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F 0.1 10-5 10-7 Turn off time, ms Turn on time, ms Off state leakage current, A 0.12 10-3 0.09 0.08 0.06 0.06 0.04 10-9 0.03 0.02 10-11 10-13 0 0 5 10 15 20 25 Load voltage, V 30 0 10 20 30 40 50 0 60 0 10 20 30 40 50 60 LED forward current, mA LED forward current, mA 14. Isolation vs. frequency characteristics (50Ω impedance) 15. Insertion loss vs. frequency characteristics (50Ω impedance) Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 100 2 80 1.5 2 Insertion loss, dB 2.5 Isolation, dB Output capacitance, pF 13. Output capacitance vs. applied voltage characteristics 60 1 40 0.5 20 1.5 1 0.5 0 0 5 10 15 20 25 Applied voltage, V 30 0 4 10 105 106 107 108 0 104 Frequency, Hz All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 105 106 Frequency, Hz 107 PhotoMOS.book Page 162 Thursday, March 26, 2009 2:21 PM RF SSOP 1 Form A C×R5 (AQY221N3V) 16. On resistance distribution 17. Turn on time distribution 18. Turn off time distribution Measured portion: between terminals 3 and 4 Continuous load current: 80mA (DC) Ambient temperature: 25°C 77°F Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25°C 77°F Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25°C 77°F 50 40 60 35 50 25 20 Quantity, n Quantity, n Quantity, n 40 30 30 40 30 20 15 20 10 10 10 5 0 2 3 4 5 6 7 0 8 On resistance, Ω 0 0.02 0.04 0.06 0.08 0.1 0 0 0.02 Turn on time, ms 19. LED operate current distribution Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25°C 77°F 30 Quantity, n 25 20 15 10 5 0 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 LED operate current, mA All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 0.04 0.06 0.08 Turn on time, ms 0.1