M ICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP Lower Frequency: Upper Frequency: MAX UNITS 2200 MHz 14.0 VDC 2660 MHz Tuning Voltage: 0.5 Supply Voltage: 7.6 8.0 8.4 VDC Output Power: +2.0 +5.0 +8.0 dBm 25 35 mA Harmonic Suppression (2 Harmonic): -15 -10 dBc Pushing: 0.3 0.6 MHz/V Pulling, all Phases: 1.0 2.0 MHz pk-pk Supply Current: nd Tuning Sensitivity: 45 MHz/V Phase Noise @ 10kHz offset: -98 dBc/Hz Phase Noise @ 100kHz offset: -118 dBc/Hz Load Impedance: 50 Input Capacitance: 12 pF Operating Temperature Range: -40 +85 °C Storage Temperature Range: -45 +90 °C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M ICROWAVE A Division of Crystek Corporation SIDE VIEW BOTTOM VIEW Gold Finish 0.465 SQ (11.81 SQ) Solder Mask 0.220 (5.59) 0.030 (0.76) 0.100 (2.54) 0.415 13 0.315 14 0.215 15 0.115 16 0.380 12 11 10 9 0.000 1 0.000 TOP ORIENTATION MARK 8 0.405 7 0.305 6 0.205 5 0.105 Pad Connection 2 10 14 Others Vt RF-OUTPUT Vcc GROUND PAD LOCATION 2 3 4 0.415 CRYSTEK CVCO55CC 2200-2660 YYWW 0.500 (12.70) 0.500 0.280 0.500 (12.70) 0.180 TOP VIEW 0.215 0.040 (1.02) 0.115 [Vt] 0.080 0.052 (1.32) 0.315 [Vcc] Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches 0.500 [RF] TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) DIRECTION OF FEED 0.945±0.012 (24.00±0.30) 0.630±0.004 (16.00±0.10) Drawing not to scale Product Control: Crystek Part Number: CVCO55CC-2200-2660 Release Date: 21-Nov-2013 Revision Level: C Responsible: C. Vales CRYSTEK CORPORATION Specification is subject to change without notice Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com