M ICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP Lower Frequency: Upper Frequency: MAX UNITS 2515 MHz 4.7 VDC 2530 Tuning Voltage: MHz 0.3 Supply Voltage: 4.75 5.0 5.25 VDC Output Power: +2.0 +4.5 +7.0 dBm 40 mA Supply Current: nd Harmonic Suppression (2 Harmonic) -25 Pushing: 0.2 0.5 MHz/V dBc Pulling, all Phases: 1.0 1.5 MHz pk-pk Tuning Sensitivity: 8 MHz/V Phase Noise @ 10kHz offset: -115 -112 dBc/Hz Phase Noise @ 100kHz offset: -135 -132 dBc/Hz Load Impedance: 50 Input Capacitance: 15 pF Operating Temperature Range: -30 +70 °C Storage Temperature Range: -45 +90 °C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Product Control: Crystek Part Number: CVCO55CC-2515-2530 Release Date: 10-Jul-2014 Revision Level: E Responsible: C. Vales CRYSTEK CORPORATION Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M ICROWAVE A Division of Crystek Corporation BOTTOM VIEW SIDE VIEW [RF] 0.465 SQ (11.81 SQ) Gold Finish 0.220 (5.59) 0.030 (0.76) 0.100 (2.54) 0.415 13 0.315 14 0.215 15 0.115 16 0.280 0.380 12 11 10 9 0.000 1 0.000 TOP ORIENTATION MARK 8 0.405 7 0.305 6 0.205 5 0.105 Pad Connection 2 10 14 Others Vt RF-OUTPUT Vcc GROUND PAD LOCATION 2 3 4 0.415 CRYSTEK CVCO55CC 2515-2530 YYWW 0.500 (12.70) 0.500 0.315 0.500 (12.70) 0.180 TOP VIEW 0.215 0.040 (1.02) 0.115 0.025 (0.64) [Vt] 0.080 0.052 (1.32) 0.500 [Vcc] Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) DIRECTION OF FEED 0.945±0.012 (24.00±0.30) 0.630±0.004 (16.00±0.10) Drawing not to scale Product Control: Crystek Part Number: CVCO55CC-2515-2530 Release Date: 10-Jul-2014 Revision Level: E Responsible: C. Vales CRYSTEK CORPORATION Specification is subject to change without notice Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com