1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: PA 6T FLAMMABILITY RATING: UL94-V0 COLOUR: IVORY CONTACT MATERIAL: PHOSPHOR BRONZE CONTACT PLATING: 120μ’’ TIN OVER 30μ’’ NICKEL ACTUATOR: PA 6T COLOUR: BLACK SUPPORT: BRASS QUALITY CLASS: 20 MATING CYLCES PITCH: 1.00 mm A ENVIRONMENTAL OPERATING TEMPERATURE: -25°C UP TO +85°C COMPLIANCE: LEAD FREE AND ROHS RECOMMANDED PCB LAYOUT COMPONENT VIEW ELECTRICAL CURRENT RATING: 0.4 A WORKING VOLTAGE: 50 V AC/DC INSULATION RESISTANCE: >100 MΩ DIELECTRIC STRENGTH: 250 VAC/MIN CONTACT RESISTANCE: 30 mΩ MAX B STANDARD CERTIFIED: E323964 SOLDERING JEDEC LEAD FREE REFLOW SOLDERING PROCESS PACKAGING TAPE & REEL WITH CAP DIMENSION A = 1.00 x (NB PINS -1) B = A +6.5 C = A +2.2 D = A +7.8 C RoHS Compliant NOTE: theoretical value related to the Tin plating; however, due to the sensitive actuator, we recommend not to make more than 1 or 2 cycles in order to maintain acceptable mechanical & electrical conditions PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: GMo B SCALE: DESCRIPTION: 1.0MM ZIF FPC VERTICAL TYPE SURFACE MOUNT CONNECTOR - TAPE & REEL WITH CAP WERI PART NO: 686 3xx 183 822 UNIT: MM A 15-MAR-16 PDF AK SHEET: 1/3 REV DATE FILE BY DRAW: AK SIZE A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: GMo B A REV DATE FILE BY SCALE: DESCRIPTION: 1.0MM ZIF FPC VERTICAL TYPE SURFACE MOUNT CONNECTOR - TAPE & REEL WITH CAP SHEET: 2/3 WERI PART NO: 686 3xx 183 822 UNIT: MM DRAW: AK SIZE A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D 1 1 2 2 Pull the actuator upwards in the open position Insert the FFC cable vertically until the conductor almost disappears A B 1 2 Press actuator in the middle to make there is no gap and the actuator is locked Press both ends of the actuator A Pull the actuator as horizontally as possible by a proper force Do not pull the actuator too far otherwise the stop limit (hook on actuator) may be broken B Do not keep FFC inclined when insertion Don’t keep conductor toward actuator