1 2 3 4 5 TECHNICAL CHARACTERISTICS A MATERIAL INSULATOR: PA 6T FLAMABILITY RATING: UL94-V0 COLOUR: IVORY ACTUATOR: PA 6T COLOUR: BLACK CONTACT MATERIAL: PHOSPHOR BRONZE CONTACT PLATING: 120µ’’ TIN OVER 50µ’’ NICKEL QUALITY CLASS: 20 MATING CYLCES PITCH: 1.00mm ACCOMODATED FFC/FPC ENVIRONMENTAL OPERATING TEMPERATURE: -40°C UP TO +105°C COMPLIANCE: LEAD FREE AND ROHS Pin 01 PCB LAYOUT - COMPONENT VIEW 0.1 Pin 01 ELECTRICAL CURRENT RATING: 1.0A WORKING VOLTAGE: 100V AC/DC INSULATION RESISTANCE: >500 MΩ WITHSTANDING VOLTAGE: 500 VAC/min CONTACT RESISTANCE: 50 mΩ max B STANDARD CERTIFIED: E323964 SOLDERING JEDEC LEAD FREE REFLOW SOLDERING PROCESS PACKAGING TAPE & REEL AVAILABLE IN 4 -6-8-10-12-14-15-16-18-20-22-24-26-28-30 C Pin 01 RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.15 .XX = +/- 0.10 E D C PUNNING AK SCALE: DESCRIPTION: WR-FPC - SMT ZIF HORIZONTAL - BOTTOM CONTACT, 1.00MM SIZE HINGE TYPE 20-OCT-14 PDF AS SHEET: 1/3 WERI PART NO: 686 1xx 148 922 DATE FILE BY DRAW: AS APPROVAL: GMo B 01-DEC-15 A REV UNIT: MM A4 D 1 2 3 4 5 Unreeling direction A B 2000 Pcs/Reel Unreeling direction Unreeling direction 2000 Pcs C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.15 .XX = +/- 0.10 E D C APPROVAL: GM B SCALE: DESCRIPTION: WR-PHD SMT ZIF HORIZONTAL - BOTTOM CONTACT, 1.00MM - SIZE HINGE TYPE WERI PART NO: 686 1xx 148 922 UNIT: MM A 24-JUL-14 PDF AS SHEET: 2/3 REV DATE FILE BY DRAW: AS A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D