ESD5V0S5US Data Sheet (836 KB, EN)

ESD5V0SxUS
Multi-Channel TVS Diode Array
• ESD / transient protection of
data and power lines
in 3.3 V / 5 V application according to:
IEC61000-4-2 (ESD): ± 30 KV (contact)
IEC61000-4-4 (EFT): 80 A (5/50 ns)
IEC61000-4-5 (Surge): 10 A (8/20 µs)
• Working voltage: 5 V (5.3 V max.)
• Low clamping voltage
• Low reverse current < 5 µA
• Pb-free (RoHS compliant) package
Applications
• Uni or bi-directional operation possible
(see application example page 5)
• Mobile communication
• Consumer products (STB, MP3, DVD, DSC...)
• LCD displays, camera
• Notebooks and desktop computers, peripherals
5
4
1
2
3
1
2
3
Type
ESD5V0S4US
ESD5V0S5US
ESD5V3S5US E6727*
Package
SOT363
SOT363
SOT363
4
6
Configuration
4 lines, uni-directional
5 lines, uni-directional
5 lines, uni-directional
5
4
6
5
3
6
ESD5V0S5US E6727
180° rotated in reel
2
ESD5V0S5US
1
ESD5V0S4US
Marking
E4s
E5s
on request
* Preliminary data
1
2011-06-17
ESD5V0SxUS
Maximum Ratings at TA = 25°C, unless otherwise specified
Parameter
Symbol
Value
Unit
ESD contact discharge per diode1)
VESD
30
kV
Peak pulse current (tp = 8 / 20 µs) per diode2)
Ipp
10
A
Peak pulse power (tp = 8 / 20 µs) per diode
Ppk
130
W
Operating temperature range
Top
-55...125
°C
Storage temperature
Tstg
-65...150
Electrical Characteristics at TA = 25°C, unless otherwise specified
Parameter
Symbol
Values
Unit
min.
typ.
max.
Characteristics -
Reverse working voltage
VRWM
-
5
5.3
Breakdown voltage
V(BR)
5.7
6.7
7.7
V
I(BR) = 1 mA
Reverse current
µA
IR
VR = 3.3 V
-
-
1
VR = 5 V
-
-
5
Clamping voltage (positive transients)
V
VCL
IPP = 1 A, tp = 8/20 µs2)
-
7
9
IPP = 10 A, tp = 8/20 µs2)
-
10.5
13
IPP = 1 A, tp = 8/20 µs2)
-
1
3
IPP = 10 A, tp = 8/20 µs2)
-
3.5
6
Forward clamping voltage (negative transients)
VFC
Diode capacitance
pF
CT
VR = 0 V, f = 1 MHz
-
70
90
VR = 5 V, f = 1 MHz
-
35
55
1V
ESD according to IEC61000-4-2
2I
pp according to IEC61000-4-5
2
2011-06-17
ESD5V0SxUS
Power derating curve Ppk = ƒ (T A)
Clamping voltage, Vcl = ƒ(Ipp )
tp = 8 / 20 µs (positive transients)
13
V
110
%
11
10
80
9
Vcl
Ppk or Ipp
90
70
8
60
7
50
6
5
40
4
30
3
20
2
10
1
0
0
25
50
75
100
°C
0
0
150
1
2
3
4
5
6
7
8
TA
A
10
Ipp
Forward clamping voltage VFC = ƒ (Ipp)
tp = 8 / 20 µs (negative transients)
Reverse current IR = ƒ(VR )
TA = Parameter
10 -6
13
V
A
11
10 -7
9
IR
VFC
10
8
10 -8
TA = 125°C
85°C
25°C
7
6
10 -9
5
4
3
10 -10
2
1
0
0
1
2
3
4
5
6
7
8
A
10 -11
0
10
Ipp
1
2
3
V
5
VR
3
2011-06-17
ESD5V0SxUS
Normalized reverse voltage
Diode capacitance CT = ƒ (VR)
VBR(TA)/VBR(25°C)= ƒ(TA)
f = 1MHz
IR = 1 mA
90
pF
1.04
1.03
70
1.02
CT
VBR(Ta)/VBR (25°C)
1.06
60
1.01
1
50
0.99
40
0.98
0.97
30
0.96
0.95
-50
-25
0
25
50
75
100
20
0
°C 150
TA
1
2
3
V
5
VR
4
2011-06-17
ESD5V0SxUS
Application example ESD5V0S5US
5 channels, uni-directional
Connector
5 protected signal lines, level 0 ... +5.3V
3
2
4
5
I/O
I/O
I/O
I/O
I/O
1
6
ESD sensitive
device
The protection diode should be placed
very close to the location where the
ESD or other transients can occur to
keep loops and inductances as small
as possible.
Pin 5 should be connected directly to a
ground plane on the board.
Connector
Application example ESD5V0S5US
4 channels, bi-directional
4 protected signal lines, level -5.3V ... +5.3V
6
5
1
2
I/O
I/O
I/O
I/O
ESD sensitive
device
4
For bi-directional protection pin 2
(or any other pin except pin 5)
should be connected directly to a
ground plane on the board.
Pin 5 is not connected. Total
clamping voltage is the sum of
VCL + VFC (see table on page 2).
3
Connector
Application example ESD5V0S4US
4 channels, uni-directional
4 protected signal lines, level 0 … +5.3V
3
2
I/O
I/O
I/O
I/O
ESD sensitive
device
1
Pin 2 and pin 5 should be
connected directly to a ground
plane on the board.
4
5
6
5
2011-06-17
Package SOT363
ESD5V0SxUS
Package Outline
2 ±0.2
0.9 ±0.1
+0.1
6x
0.2 -0.05
0.1
0.1 MAX.
M
0.1
Pin 1
marking
1
2
3
A
1.25 ±0.1
4
0.1 MIN.
5
2.1 ±0.1
6
0.15 +0.1
-0.05
0.65 0.65
0.2
M
A
Foot Print
1.6
0.9 0.7
0.3
0.65
0.65
Marking Layout (Example)
Small variations in positioning of
Date code, Type code and Manufacture are possible.
Manufacturer
2005, June
Date code (Year/Month)
Pin 1 marking
Laser marking
BCR108S
Type code
Standard Packing
Reel ø180 mm = 3.000 Pieces/Reel
Reel ø330 mm = 10.000 Pieces/Reel
For symmetric types no defined Pin 1 orientation in reel.
0.2
2.3
8
4
Pin 1
marking
1.1
2.15
6
2011-06-17
ESD5V0SxUS
Edition 2009-11-16
Published by
Infineon Technologies AG
81726 Munich, Germany
 2009 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee
of conditions or characteristics. With respect to any examples or hints given herein,
any typical values stated herein and/or any information regarding the application of
the device, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation, warranties of non-infringement of
intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices,
please contact the nearest Infineon Technologies Office (<www.infineon.com>).
Warnings
Due to technical requirements, components may contain dangerous substances.
For information on the types in question, please contact the nearest Infineon
Technologies Office.
Infineon Technologies components may be used in life-support devices or systems
only with the express written approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the failure of that life-support
device or system or to affect the safety or effectiveness of that device or system.
Life support devices or systems are intended to be implanted in the human body or
to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be
endangered.
7
2011-06-17