1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL ICONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: FOR 3.00MM A ENVIRONMENTAL OPERATING TEMPERATURE: -25 UP TO 105°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING:5A WORKING VOLTAGE: 250V AC INSULATOR RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 1500V AC/MN CONTACT RESISTANCE: 10 mOHM MAX WIRE DIMENSION: AWG: AWG 20 - 24 B DIMENSION AWG 20 - 24 A 2.50 B 2.95 C 2.30 D 2.00 PACKAGING BULK/LOOSE DELIVERY IN A BAG EACH CONTACT SEPARATED FROM EACH OTHER NOT ON A REEL 100PCS/PER BAG. MULTIPLE OF 100PCS ONLY 1PCS OF 66200113722DEC=1 CRIMP CONTACT SO 1 BAG MEANS 100 PCS OF 66200113722DEC C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: BBu B UNIT: MM DESCRIPTION: 3.00MM FEMALE CRIMP TERMINAL SIZE WERI PART NO: 662 001 137 22 DEC A4 SCALE: A 12-MAY-10 PDF JP SHEET: 1/2 REV DATE FILE BY DRAW: MIKE D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 2/2 REV DATE FILE BY DRAW: QL D