1 2 3 4 5 TECHNICAL CHARACTERISTICS PCB LAYOUT - COMPONENT VIEW A MATERIAL INSULATOR: LCP FLAMABILITY RATING: UL94-V0 COLOR: BLACK CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: 3.00MM ENVIRONMENTAL OPERATING TEMPERATURE: -40 UP TO 105 °C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING: 5A WORKING VOLTAGE: 250 VAC INSULATOR RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 1500 VAC/MN CONTACT RESISTANCE: 10 mOHM MAX B STANDARD T CERTIFIED: E323964 SOLDERING JEDEC LEAD FREE REFLOW SOLDERING PROCESS PACKAGING TAPE AND REEL WITH CAP DIMENSION A = 3.00 x (NB. PIN -1) B = 3.00 x (NB. PIN +1) +0.65 C LAST CKT. CKT.#1 RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 F E D C APPROVAL: BBu B SCALE: DESCRIPTION: 3.00 MM SMT SINGLE ROW MALE VERTICAL HEADER WITH SMT SOLDER TABS WERI PART NO: 662 3xx 131 822 UNIT: MM A 15-JUL-15 PDF AK SHEET: 1/3 REV DATE FILE BY DRAW: AK SIZE A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 F E D C APPROVAL: BBu B A REV DATE FILE BY SCALE: DESCRIPTION: 3.00 MM SMT SINGLE ROW MALE VERTICAL HEADER WITH SMT SOLDER TABS SHEET: 2/3 WERI PART NO: 662 3xx 131 822 UNIT: MM DRAW: AK SIZE A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D