1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: LCP FLAMABILITY RATING: UL94-V0 COLOR: BLACK CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: 3.00MM A ENVIRONMENTAL OPERATING TEMPERATURE: -40 UP TO 105°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING:5A WORKING VOLTAGE: 250V AC INSULATOR RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 1500V AC/MN CONTACT RESISTANCE: 10 mOHM MAX LAST CKT. B SOLDERING JEDEC LEAD FREE REFLOW SOLDERING PROCESS PACKAGING TAPE AND REEL WITH PLASTIC CAP CKT.#1 CKT.#2 DIMENSION A = 3.00 x (NB. PIN / 2 - 1) B = 3.00 x (NB. PIN / 2 + 1) + 0.70 NB. PIN 2 to 6 8 10 12 14 C 2.9 7.6 10.6 13.6 16.6 NB. PIN 16 18 20 22 24 C 19.6 22.6 25.6 28.6 31.6 C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 K 02-JUL-15 PINNING AK J 13-JAN-2015 PROJECTION QP I 29-JUL-13 DWG & CARAC QL SCALE: DESCRIPTION: 3.00MM MALE DUAL ROW SMT RIGHT ANGLE HEADER WITH PLASTIC PEGS H 06-JUL-12 PLASTIC GG SHEET: 1/3 WERI PART NO: 662 1xx 236 022 REV DATE FILE BY DRAW: JACK APPROVAL: BBu UNIT: MM SIZE A4 D 1 2 3 4 5 A s B d C 330 mm RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: BBu B A REV DATE FILE BY SCALE: DESCRIPTION: 3.00MM MALE DUAL ROW SMT RIGHT ANGLE HEADER WITH PLASTIC PEGS SHEET: 2/3 WERI PART NO: 662 1xx 236 022 UNIT: MM DRAW: JACK SIZE A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D