Model 5935 2mm (.080in) Insulated Banana Jack Features • • • Banana jack is insulated from the panel Solder hole at the bottom of the jack allows for 18 to 22 AWG wire attachment Recommended maximum panel thickness: .31” (8,0 mm) Materials Banana Jack and Nut: Brass, Nickel Plated Insulator: Nylon Ratings Operating Voltage: Operating Current: For CE Compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms/60 Vdc. Maximum voltage for hands free use: 500 Vrms. Do not use on circuits where transient stresses can exceed the rated voltage. 5 Amperes Max. Ordering Information Model: 5935-* * = Standard Color: -0 Black Sold in packages of 10 Ordering Example: 5935-0, Banana Jack is Black. USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D1094504 Rev. 101 Page 1 of 1