1 2 3 4 A±0.10 TECHNICAL CHARACTERISTICS 2.54±0.05 1.50±0.05 3.0 MATERIAL HOUSING MATERIAL: PA6T FLAMABILITY RATING: UL94-V0 COLOR: RED CONTACT MATERIAL: PHOSPHOR BRONZE CONTACT TYPE: STAMPED CONTACT PLATING: MATT TIN OVER NICKEL QUALITY CLASS: 25 MATING CYCLES PITCH: 2.54 MM PER ROW 1.27±0.05 1.50±0.05 C±0.20 PCB LAYOUT - COMPONENT VIEW 5.2 1.90 5.25 5.00 5.75 5.30 A ENVIRONNEMENTAL OPERATING TEMPERATURE: -40°C UP TO 105°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING: 1.5 A PER PIN (PCB PIN) WORKING VOLTAGE: 100 VAC INSULATION RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLT.: 500 VAC/MN CONTACT RESISTANCE: 10 mOHM MAX B STANDARD CERTFIED: E323964 0.1 2.10 5 SOLDERING JEDEC LEAD FREE REFLOW SOLDERING 7.0 B±0.30 PACKAGING TAPE & REEL 5.0 4.00 A±0.10 DIMENSION A= 1.27 x (Nb PIN -1) B= DIM.A + 5.87 C= DIM.A + 1.80 C 0.25 1.27 RoHS Compliant PROJECTION: G PIN 1 ADDED GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 F 05-NOV-14 E 17-FEB-10 D 17-NOV-09 DIMENSION JP C 10-AUG-09 LATCH SHAPE CH B 27-NOV-07 MODIFICATIONS EC SCALE: DESCRIPTION: MM FEMALE SMT CONNECTOR WITH LATCH AND POLARIZATION A 03-NOV-06 PDF JP SHEET: 1/3 WERI PART NO: 690 367 29 xx 76 REV DATE FILE BY DRAW: EAGER NEW CAP QL JP APPROVAL: GMo UNIT: MM SIZE A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: GMo B A REV DATE FILE BY SCALE: DESCRIPTION: MM FEMALE SMT CONNECTOR WITH LATCH AND POLARIZATION SHEET: 2/3 WERI PART NO: 690 367 29 xx 76 UNIT: MM DRAW: EAGER SIZE A4 D 1 ! Insert through polarization 2 ! Press both ends of the connector at the same time 3 Do not inclined connector when insertion Do not reverse polarization Do not inclined the connector vertically Do not turn the connector horizontally 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D