PANASONIC ESE58L11B

Detector Switches/ESE58
09HL Detector Switches
Type:
ESE58
■ Features
■ Recommended Applications
● Thin body: 0.9 mm.
● Circuit type: Normally-open and normally-closed
● Detection of media in portable electronic equipment
(Mobile phones/Digital still cameras/DVCs, etc.)
types are available.
● Lineup with variations in right-left operations.
■ Explanation of Part Numbers
1
2
3
4
5
E
S
E
5
8
6
8
9
Design No
Product Code
6th
L
R
7
Type
Left-side operation type
Right-side operation type
■ Specifications
Rating
50 µA 3 Vdc to 10 mA 5 Vdc (Resistive load)
Contact Resistance
500 m액 max. (Initial)
Insulation Resistance
100 M액 min. (100 Vdc)
Dielectric Withstanding Voltage
100 Vac for 1 minute
Operating Force
300 mN max.
Mounting Height
0.9 mm
Poles and Throws
1-pole 1-throw
With boss
: 1.5 mm (1.5 mm)
Without boss : 1.25 mm (1.5 mm)
Full Travel (Pushing distance)
Operating Life
50000 cycles min.
Temperature Range
–10 °C to +60 °C
Heat Resistance
+70 °C for 96 hours
Low Temperature Resistance
–25 °C for 96 hours
Humidity Resistance
+40 °C 90 % to 95 % RH for 96 hours
Minimum Quantity/Packing Unit
5000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton
30000 pcs.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES25 –
00 Oct. 2012
Detector Switches/ESE58
■ Dimensions in mm (not to scale)
No. 1
Nomal open type
ESE58L11 J-bent terminals
1-pole 1-throw
with Boss
ESE58L11B
without Boss
ESE58L11A
0.5
0.2
with Boss
ESE58L61B
1.25
1.1
1.75
2.3
On position
Operation point
(0.75)
0.9±0.1
2.8
4.5
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
without Boss
ESE58L61A
0.2
0.5
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
φ0.6±0.05
1.6±0.1
Nomal open type
ESE58R11 J-bent terminals
1-pole 1-throw
0.6
1.05
0.8
1.55
2.45
0.9±0.1
2.8
4.5
1.35
3.5
0.77
0.39
Off position
(0.55)
3.0
1.35
0.4
0.9
0.8
2.8
4.5
2.15±0.2
0.3
0.7
2–φ
Off position
0.9±0.1
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
without Boss
ESE58R11A
0.2
φ0.6±0.05
1.6±0.1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES26 –
1.25
1.1
2.3±0.2
2.65
0.9±0.1
On position
1.75
R0
.14
Operation point
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
3.5
Full stroke position 1.25
2.8
4.5
(0.75)
3.0
0.3
0.9±0.1
R
0.77
0.39
5
2.4
0.7
On position 0.48
Pivot center 0.24
(0.64)
0.8
φ0
.7
2–
1.6
2.55±0.2
2.9
2.0
Operation point
Full stroke position 1.5
0.25
3.5
On position
R0
R
0.77
0.39
5
2.4
(1)
On position 0.48
Pivot center 0.24
(0.64)
.14
0.5
0.5
0.2
0.4
C0
.1
0.44 Off position
0.24
Pivot center
(0.64)
.45
Operation point
R2
0.6
0.45
2.9
2.6±0.2
2.0
Operation point
Full stroke position 1.5
(1)
with Boss
ESE58R11B
1.6
Full stroke position 1.05
0.5
0.45
0.3
3.0
0.9
0.4
0.4
C0
.1
3.5±0.2
No. 3
0.77
0.39
0.44 Off position
0.24
Pivot center
(0.64)
.14
.45
R0
.14
R0
R2
0.7
2.65
0.7
3.0
2.0
2.55±0.2
0.8
3.5
0.2
3.0
(0.64)
2.8
4.5
Nomal closed type
ESE58L61 J-bent terminals
1-pole 1-throw
No. 2
0.77
0.39
0.48 On position
0.24
Pivot center
.45
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
φ0.6±0.05
1.6±0.1
0.4
C0
.1
R2
0.3
0.9±0.1
On position
Operation point
(1)
Full stroke position 1.5
3.0
0.25
3.5
2.9
0.7
(0.64)
1.6
2–φ
0.7
0.77
0.39
0.48 On position
0.24
Pivot center
.14
.14
.45
R0
R0
R2
Full stroke position 1.25
0.5
0.2
2.8
4.5
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
00 Oct. 2012
Detector Switches/ESE58
■ Dimensions in mm (not to scale)
No. 4
Nomal closed type
ESE58R61 J-bent terminals
1-pole 1-throw
with Boss
ESE58R61B
without Boss
ESE58R61A
0.4
C0
.1
0.6
1.05
Full stroke position 1.05
Operation point
1.55
Off position
2.15±0.2
2.45
0.6
0.45
0.4
(0.55)
2.8
4.5
3.5
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
0.9±0.1
2.8
4.5
0.8
(0.64)
3.0
1.35
0.9±0.1
0.77
0.39
.45
R2
1.35
R0
.1
4
0.44
0.24
0.3
Pivot center
0.9
Full stroke position 1.5
2.0
Operation point
2.6±0.2
Off position
2.9
0.45
0.3
(1)
3.0
0.9
0.4
3.5
1.6
0.8
R
Pivot center (0.64)
Off position
0.77
0.39
5
2.4
2–φ
0.7
0.44
0.24
R0
.1
4
Off position
0.5
0.2
0.5
0.2
PWB mounting hole
for reference
(Pitch tolerance: ±0.05)
φ0.6±0.05
1.6±0.1
■ Circuit Diagram
Normal open type
1-pole 1-throw (N . O)
Type ESE58L
Type ESE58R
Common
Terminal
C
Common
Terminal
1
Normal closed type
1-pole 1-throw (N . C)
Type ESE58L
C
1
1
C Terminal
Type ESE58R
Common
Terminal C
1
Common
■ Packaging Specifications
Standard Reel Dimensions in mm (not to scale)
Taping Reel
φ380.0±2.0
Embossed Carrier Taping
16.4
P=8.0±0.1
4.0±0.1
2.0±0.1
Pilot holes
Drawing direction
TOP
Leading portion 400 mm min.
7.5±0.1
1.75±0.1
13.5
16.0±0.3
.1
+0 0
.5
φ1
END
Carrier tape
Non-packed portion
(160 mm min.)
Packed portion
Non-packed portion
(100 mm min.)
Cover tape
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES27 –
00 Oct. 2012