Product Highlights PRODUCTS TO SOLUTIONS RF Products Test Set Model STG-12-S1 is an E-Band noise figure and gain test set, which including a high performance solid-state E-Band noise source (STZ-12-I1) and a full waveguide band down converter (STC-20-12-S1). It extends the noise and gain measurement capacity from 10.0 to 15.0 GHz to the frequency range of 60 to 90 GHz. The full waveguide band down converter requires a +10 dBm LO signal in the frequency range of 10.0 to 15.0 GHz. SAGE Millimeter sagemillimeter.com Ducommun has more than 45 years of experience with the design, testing and manufacturing of coaxial switches and integrated systems. Coaxial Switch t 400 MHz to 8 GHz t Low Insertion Loss t High isolation t For use in all Thermal Vacuum Chambers Manually Controlled t DC to 18 GHz t Available in SPDT, DPDT, Multi-throw t Great for lab testing Ultra Broadband t SPDT to SP8T t Isolation: i. Reflective: 25dB min ii. Absorptive: 40dB min Crystek crystek.com High Frequency Electronics Digital July 2015 t 0.05 MHz to 67 GHz For additional information, contact our sales team at 310.513.7256 or [email protected] CONTACT US VCO Crystekâs CVCO55CC-3650-3650 VCO operates at 3650 MHz with a control voltage range of 0.5 V~4.5 V. This VCO features a typical phase noise of -108 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +7 dBm. Engineered and manufactured in the USA, the model CVCO55CC-3650-3650 is packaged in the industry-standard 0.5-in. x 0.5-in. SMD package. t Complete solid state solution Get info at www.HFeLink.com 47