pdf

Model 73053
TNC Right-Angle Jack to Plug Adapter
Materials
Center Conductor:
Male: Brass, Gold Plated
Female: Phosphor Bronze, Gold Plated
Connector Body: Brass, Nickel Plated
Insulators: PTFE
Specifications
Model 73053
TNC Right-Angle Jack to Plug Adapter
Features
•
•
DC – 4GHz bandwidth.
Connectors are precision machined.
Sales: 800-490-2361
Technical Support: [email protected]
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
USA:
Impedance:
50Ω
Frequency Range:
DC – 4GHz
Contact Resistance:
Center Conductor:
≤1.5 mΩ
Outer Conductor:
≤0.2 mΩ
Insulation Reistance:
≥ 5000 MΩ
Dielectric Withstand Voltage:
1500V
For CE compliance, do not hold in hand when
voltages exceed 33 Vrms / 70 Vdc.
Number of Insertions:
500 cycles minimum
Ordering Information
Model: 73053
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2009
D2018798 Rev. 001
Page 1 of 1