Pomona ® Model 3548 Miniature Banana Jack To Solderless Pin Tip Plug With Safety Collar FEATURES: • This integral collar insulates exposed wire leads and acts as a strain relief by preventing the flexing of the lead at the set screw. • Wire firmly held in place with internal set screw. MATERIALS: Upper Conn.: Miniature Banana Jack Material: Brass per QQ-B-626, Alloy 360, ½ Hard. Finish: Gold plated per MIL-G-45204, Type II, Class 00 over electroless nickel per MIL-C-26074, Class 1, 200 to 300 micro-inches. Insulation: ABS molded to Banana Jack and Pin Tip Plug. Marking: “POMONA ELECTRONICS, 3548”. Lower Conn: Pin Tip Plug Material: Same as Upper Conn. Finish: Same as Upper Conn. Cross Hole: 2.08 (.082) dia. with #3-56 slotted set screw to secure wire lead. RATINGS: Operating Temperature: +50°C. (+122°F.) Max. Operating Voltage: 3000 VDC Current: 5 Amperes Cont. ORDERING INFORMATION: Model 3548-* *=Color, -0 Black –2 Red, Ordering Example: 3548-2 Color is Red All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d3548_1_01.doc PomonaACCESS 90578 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1