SQ3425EV www.vishay.com Vishay Siliconix Automotive P-Channel 20 V (D-S) 175 °C MOSFET FEATURES PRODUCT SUMMARY VDS (V) • TrenchFET® power MOSFET -20 RDS(on) (Ω) at VGS = -4.5 V 0.060 RDS(on) (Ω) at VGS = -2.5 V 0.100 ID (A) • AEC-Q101 qualified c • 100 % Rg and UIS tested • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 -7.4 Configuration Single Package TSOP-6 TSOP-6 Single D 5 D 6 (1, 2, 5, 6) D S 4 (3) G 1 D Top View 2 D 3 G (4) S P-Channel MOSFET Marking Code: 8Z ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS -20 Gate-Source Voltage VGS ± 12 Continuous Drain Current TC = 25 °C TC = 125 °C Continuous Source Current (Diode Conduction) Pulsed Drain Current IS a Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipation a ID L = 0.1 mH TC = 25 °C TC = 125 °C Operating Junction and Storage Temperature Range V -7.4 -4.3 -4.5 IDM -29 IAS -11 EAS 6 PD UNIT 5 1.67 A mJ W TJ, Tstg -55 to +175 °C SYMBOL LIMIT UNIT RthJA 110 RthJF 30 THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Foot (Drain) PCB Mount b °C/W Notes a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. b. When mounted on 1" square PCB (FR4 material). c. Parametric verification ongoing. S15-2410-Rev. A, 12-Oct-15 Document Number: 68215 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ3425EV www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage Gate-Source Leakage VDS VGS = 0, ID = -250 μA -20 - - VGS(th) VDS = VGS, ID = -250 μA -0.6 -1 -1.4 IGSS VDS = 0 V, VGS = ± 12 V - ± 100 VGS = 0 V VDS = -20 V - - -1 - - -50 Zero Gate Voltage Drain Current IDSS VGS = 0 V VDS = -20 V, TJ = 125 °C VGS = 0 V VDS = -20 V, TJ = 175 °C - - -150 On-State Drain Current a ID(on) VGS = -4.5 V VDS ≤ -5 V -15 - - VGS = -4.5 V ID = -4.7 A - 0.049 0.060 Drain-Source On-State Resistance a Forward Transconductancea RDS(on) gfs VGS = -4.5 V ID = -4.7 A, TJ = 125 °C - 0.065 - VGS = -4.5 V ID = -4.7 A, TJ = 175 °C - 0.074 - VGS = -2.5 V ID = -1 A - 0.089 0.100 - 9 - VDS = -10 V, ID = -4.7 A V nA μA A Ω S Dynamic b Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge c Gate-Source Charge c Gate-Drain Charge c Gate Resistance Turn-On Delay Time c Rise Time c Turn-Off Delay Time c Fall Time c VGS = 0 V VDS = -10 V, f = 1 MHz Qg Qgs VGS = -4.5 V VDS = -10 V, ID = -4.7 A Qgd Rg f = 1 MHz td(on) tr td(off) VDD = -10 V, RL = 10 Ω ID ≅ -1 A, VGEN = -4.5 V, Rg = 6 Ω tf Source-Drain Diode Ratings and Characteristics - 560 840 - 178 267 - 126 190 - 6.9 10.3 - 1.2 - - 2.6 - 3 6.1 9.1 - 11 15 pF nC Ω - 26 35 - 41 55 - 28 38 - - -21 A - -0.8 -1.2 V ns b Pulsed Current a ISM Forward Voltage VSD IF = -1.7 A, VGS = 0 V Notes a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S15-2410-Rev. A, 12-Oct-15 Document Number: 68215 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ3425EV www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) Axis Title Axis Title 10000 20 10000 20 10 VGS = 2.5 V 100 5 2 3 100 TC = 25 °C 5 TC = 125 °C 4 TC = -55 °C 0 10 1 10 VGS = 1.5 V 0 0 1000 5 10 0 1 2 VGS - Gate-to-Source Voltage (V) 2nd line Output Characteristics Transfer Characteristics 15 1000 3 1st line 2nd line 2nd line ID - Drain Current (A) 4 2 100 TC = 25 °C 1 2nd line gfs - Transconductance (S) 10000 TC = 125 °C 5 Axis Title Axis Title 10000 12 TC = -55 °C TC = 25 °C 1000 9 TC = 125 °C 6 100 3 TC = -55 °C 0 0 10 1 2 3 4 5 10 0 1.0 2.0 3.0 4.0 VGS - Gate-to-Source Voltage (V) 2nd line ID - Drain Current (A) 2nd line Transfer Characteristics Transconductance Axis Title 5.0 Axis Title 0.5 1000 10000 10000 800 VGS = 2.7 V 1000 0.3 0.2 100 0.1 10 8 12 100 Coss Crss 0 4 400 200 VGS = 4.5 V 0 1000 Ciss 600 1st line 2nd line VGS = 2.5 V 2nd line C - Capacitance (pF) 0.4 1st line 2nd line 2nd line RDS(on) - On-Resistance (Ω) 4 VDS - Drain-to-Source Voltage (V) 2nd line 5 0 3 1st line 2nd line VGS = 2 V 15 1st line 2nd line VGS = 3 V 2nd line ID - Drain Current (A) 1000 1st line 2nd line 2nd line ID - Drain Current (A) VGS = 3.5 V thru 5 V 15 16 20 0 10 0 5 10 15 ID - Drain Current (A) 2nd line VDS - Drain-to-Source Voltage (V) 2nd line On-Resistance vs. Drain Current Capacitance S15-2410-Rev. A, 12-Oct-15 20 Document Number: 68215 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ3425EV www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) Axis Title Axis Title 2.0 1000 3 2 100 1 0 2 4 6 1.7 VGS = 4.5 V 1.1 VGS = 2.5 V 10 -50 -25 0 25 50 75 100 125 150 175 Qg - Total Gate Charge (nC) 2nd line TJ - Junction Temperature (°C) 2nd line Gate Charge On-Resistance vs. Junction Temperature Axis Title Axis Title 100 10000 10000 10 1000 1st line 2nd line ID = 5 mA 0.1 100 -0.2 -0.5 10 -50 -25 0 25 50 TJ = 150 °C TJ = 25 °C 0.1 100 0.01 0.001 75 100 125 150 175 10 0 0.3 0.6 1.2 1.5 VSD - Source-to-Drain Voltage (V) 2nd line Threshold Voltage Source Drain Diode Forward Voltage Axis Title Axis Title -20 1000 1st line 2nd line 0.3 0.2 100 TJ = 150 °C 0.1 TJ = 25 °C 0 10 2 3 4 5 10000 -21 ID = 1 mA 1000 -22 1st line 2nd line 0.4 2nd line VDS - Drain-to-Source Voltage (V) 10000 1 0.9 TJ - Temperature (°C) 2nd line 0.5 0 1000 1 1st line 2nd line ID = 250 μA 0.4 2nd line IS - Source Current (A) 0.7 2nd line VGS(th) Variance (V) 100 0.8 8 1.0 2nd line RDS(on) - On-Resistance (Ω) 1000 1.4 0.5 10 0 10000 ID = 4.7 A 1st line 2nd line ID = 1 A VDS = 10 V 4 2nd line RDS(on) - On-Resistance (Normalized) 10000 1st line 2nd line 2nd line VGS - Gate-to-Source Voltage (V) 5 -23 100 -24 -25 10 -50 -25 0 25 50 75 100 125 150 175 VGS - Gate-to-Source Voltage (V) 2nd line TJ - Junction Temperature (°C) 2nd line On-Resistance vs. Gate-to-Source Voltage Drain Source Breakdown vs. Junction Temperature S15-2410-Rev. A, 12-Oct-15 Document Number: 68215 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ3425EV www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) Axis Title 100 10000 IDM limited Limited by RDS(on) (1) 100 μs 1000 1st line 2nd line 2nd line ID - Drain Current (A) 10 μs 10 1 ms 1 10 ms 100 ms, 1100 s, 10 s, DC 0.1 BVDSS limited TC = 25 °C Single pulse 0.01 0.01 (1) 10 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) VGS > minimum VGS at which RDS(on) is specified Safe Operating Area 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 Notes: 0.1 PDM 0.1 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = RthJA = 90 °C/W 3. TJM - TA = PDMZthJA(t) Single Pulse 4. Surface Mounted 0.01 10-4 10-3 10-2 10-1 1 Square Wave Pulse Duration (s) 10 100 600 Normalized Thermal Transient Impedance, Junction-to-Ambient S15-2410-Rev. A, 12-Oct-15 Document Number: 68215 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ3425EV www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 Square Wave Pulse Duration (s) 1 10 Normalized Thermal Transient Impedance, Junction-to-Foot Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Case (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?68215. S15-2410-Rev. A, 12-Oct-15 Document Number: 68215 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Ordering Information www.vishay.com Vishay Siliconix TSOP-6 Ordering codes for the SQ rugged series power MOSFETs in the TSOP-6 package: DATASHEET PART NUMBER OLD ORDERING CODE a NEW ORDERING CODE SQ3410EV SQ3410EV-T1-GE3 SQ3410EV-T1_GE3 SQ3418AEEV - SQ3418AEEV-T1_GE3 SQ3418EV - SQ3418EV-T1_GE3 SQ3419AEEV - SQ3419AEEV-T1_GE3 SQ3419EV - SQ3419EV-T1_GE3 SQ3425EV - SQ3425EV-T1_GE3 SQ3426AEEV - SQ3426AEEV-T1_GE3 SQ3426EV - SQ3426EV-T1_GE3 SQ3427AEEV - SQ3427AEEV-T1_GE3 SQ3427EV - SQ3427EV-T1_GE3 SQ3456BEV SQ3456BEV-T1-GE3 SQ3456BEV-T1_GE3 SQ3457EV SQ3457EV-T1-GE3 SQ3457EV-T1_GE3 SQ3460EV SQ3460EV-T1-GE3 SQ3460EV-T1_GE3 SQ3461EV - SQ3461EV-T1_GE3 SQ3469EV SQ3469EV-T1-GE3 SQ3469EV-T1_GE3 SQ3481EV SQ3481EV-T1-GE3 SQ3481EV-T1_GE3 SQ3985EV - SQ3985EV-T1_GE3 Note a. Old ordering code is obsolete and no longer valid for new orders Revision: 03-Nov-15 Document Number: 65849 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix TSOP: 5/6−LEAD JEDEC Part Number: MO-193C e1 e1 5 4 6 E1 1 2 5 4 E E1 1 3 2 3 -B- e b E -B- e 0.15 M C B A 5-LEAD TSOP b 0.15 M C B A 6-LEAD TSOP 4x 1 -A- D 0.17 Ref c R R A2 A L2 Gauge Plane Seating Plane Seating Plane 0.08 C L A1 -C- (L1) 4x 1 MILLIMETERS Dim A A1 A2 b c D E E1 e e1 L L1 L2 R Min Nom Max Min Nom Max 0.91 - 1.10 0.036 - 0.043 0.01 - 0.10 0.0004 - 0.004 0.90 - 1.00 0.035 0.038 0.039 0.30 0.32 0.45 0.012 0.013 0.018 0.10 0.15 0.20 0.004 0.006 0.008 2.95 3.05 3.10 0.116 0.120 0.122 2.70 2.85 2.98 0.106 0.112 0.117 1.55 1.65 1.70 0.061 0.065 0.067 0.95 BSC 0.0374 BSC 1.80 1.90 2.00 0.071 0.075 0.079 0.32 - 0.50 0.012 - 0.020 0.60 Ref 0.024 Ref 0.25 BSC 0.010 BSC 0.10 - - 0.004 - - 0 4 8 0 4 8 7 Nom 1 ECN: C-06593-Rev. I, 18-Dec-06 DWG: 5540 Document Number: 71200 18-Dec-06 INCHES 7 Nom www.vishay.com 1 AN823 Vishay Siliconix Mounting LITTLE FOOTR TSOP-6 Power MOSFETs Surface mounted power MOSFET packaging has been based on integrated circuit and small signal packages. Those packages have been modified to provide the improvements in heat transfer required by power MOSFETs. Leadframe materials and design, molding compounds, and die attach materials have been changed. What has remained the same is the footprint of the packages. The basis of the pad design for surface mounted power MOSFET is the basic footprint for the package. For the TSOP-6 package outline drawing see http://www.vishay.com/doc?71200 and see http://www.vishay.com/doc?72610 for the minimum pad footprint. In converting the footprint to the pad set for a power MOSFET, you must remember that not only do you want to make electrical connection to the package, but you must made thermal connection and provide a means to draw heat from the package, and move it away from the package. In the case of the TSOP-6 package, the electrical connections are very simple. Pins 1, 2, 5, and 6 are the drain of the MOSFET and are connected together. For a small signal device or integrated circuit, typical connections would be made with traces that are 0.020 inches wide. Since the drain pins serve the additional function of providing the thermal connection to the package, this level of connection is inadequate. The total cross section of the copper may be adequate to carry the current required for the application, but it presents a large thermal impedance. Also, heat spreads in a circular fashion from the heat source. In this case the drain pins are the heat sources when looking at heat spread on the PC board. Since surface mounted packages are small, and reflow soldering is the most common form of soldering for surface mount components, “thermal” connections from the planar copper to the pads have not been used. Even if additional planar copper area is used, there should be no problems in the soldering process. The actual solder connections are defined by the solder mask openings. By combining the basic footprint with the copper plane on the drain pins, the solder mask generation occurs automatically. A final item to keep in mind is the width of the power traces. The absolute minimum power trace width must be determined by the amount of current it has to carry. For thermal reasons, this minimum width should be at least 0.020 inches. The use of wide traces connected to the drain plane provides a low impedance path for heat to move away from the device. REFLOW SOLDERING Vishay Siliconix surface-mount packages meet solder reflow reliability requirements. Devices are subjected to solder reflow as a test preconditioning and are then reliability-tested using temperature cycle, bias humidity, HAST, or pressure pot. The solder reflow temperature profile used, and the temperatures and time duration, are shown in Figures 2 and 3. Figure 1 shows the copper spreading recommended footprint for the TSOP-6 package. This pattern shows the starting point for utilizing the board area available for the heat spreading copper. To create this pattern, a plane of copper overlays the basic pattern on pins 1,2,5, and 6. The copper plane connects the drain pins electrically, but more importantly provides planar copper to draw heat from the drain leads and start the process of spreading the heat so it can be dissipated into the ambient air. Notice that the planar copper is shaped like a “T” to move heat away from the drain leads in all directions. This pattern uses all the available area underneath the body for this purpose. 0.167 4.25 0.074 1.875 0.014 0.35 0.122 3.1 0.026 0.65 0.049 1.25 0.049 1.25 0.010 0.25 FIGURE 1. Recommended Copper Spreading Footprint Document Number: 71743 27-Feb-04 Ramp-Up Rate +6_C/Second Maximum Temperature @ 155 " 15_C 120 Seconds Maximum Temperature Above 180_C 70 − 180 Seconds Maximum Temperature 240 +5/−0_C Time at Maximum Temperature 20 − 40 Seconds Ramp-Down Rate +6_C/Second Maximum FIGURE 2. Solder Reflow Temperature Profile www.vishay.com 1 AN823 Vishay Siliconix 10 s (max) 255 − 260_C 1X4_C/s (max) 3-6_C/s (max) 217_C 140 − 170_C 60 s (max) 60-120 s (min) Pre-Heating Zone 3_C/s (max) Reflow Zone Maximum peak temperature at 240_C is allowed. FIGURE 3. Solder Reflow Temperature and Time Durations THERMAL PERFORMANCE TABLE 1. Equivalent Steady State Performance—TSOP-6 Thermal Resistance Rqjf 30_C/W On-Resistance vs. Junction Temperature 1.6 VGS = 4.5 V ID = 6.1 A 1.4 rDS(on) − On-Resiistance (Normalized) A basic measure of a device’s thermal performance is the junction-to-case thermal resistance, Rqjc, or the junction-to-foot thermal resistance, Rqjf. This parameter is measured for the device mounted to an infinite heat sink and is therefore a characterization of the device only, in other words, independent of the properties of the object to which the device is mounted. Table 1 shows the thermal performance of the TSOP-6. 1.2 1.0 0.8 0.6 −50 SYSTEM AND ELECTRICAL IMPACT OF TSOP-6 −25 0 25 50 75 100 125 150 TJ − Junction Temperature (_C) FIGURE 4. Si3434DV In any design, one must take into account the change in MOSFET rDS(on) with temperature (Figure 4). www.vishay.com 2 Document Number: 71743 27-Feb-04 Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR TSOP-6 0.099 0.039 0.020 0.019 (1.001) (0.508) (0.493) 0.064 (1.626) 0.028 (0.699) (3.023) 0.119 (2.510) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index APPLICATION NOTE Return to Index www.vishay.com 26 Document Number: 72610 Revision: 21-Jan-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000