OV2744 1080p product brief lead free available in a lead-free package Second-Generation RBG-Ir PureCel® Sensor Brings Biometric Functionality to Notebooks and Mobile Devices The OV2744 is a 1.4-micron PureCel® image sensor that utilizes OmniVision's second-generation, industryleading RGB-Ir technology to bring biometric capabilities such as facial recognition to the next generation of notebooks, tablets, and front-facing cameras in smartphones. Using OmniVision's groundbreaking RGB-Ir technology, the OV2744 delivers high quality IR output without compromising its premium RGB images. This solution eliminates the need to have two-camera solutions for devices that require both IR and RGB imaging. Compared to other RBG-IR sensors in the market right now, the OV2744's best-in-class color reproduction shows less color aliasing, and requires the lowest power consumption of any 1080p sensor currently available. The 1/6-inch OV2744 captures full resolution 1080p high definition (HD) video at 60 frames per second (fps) with support for full frame staggered high dynamic range (HDR). The sensor also features ultra-low power mode (ULPM), which reduces the resolution and frame rates to conserve additional power. The sensor fits into a 5 x 5 x 3 mm module. Find out more at www.ovt.com. OV2744 Applications ¬ Smartphones ¬ Digital Still Cameras (DSC) ¬ Ultrabooks and Notebooks ¬ Digital Video Camcorders (DVC) ¬ Tablets ¬ PC Multimedia Ordering Information ¬ OV02744-GA5A (RGB-Ir, chip probing, 150 µm backgrinding, reconstructed wafer with good die) Product Features ¬ 1.4 µm x 1.4 µm pixel ¬ up to 2-lane MIPI serial output interface (supports maximum speed up to 1000 Mbps/lane) ¬ optical size of 1/6" Product Specifications ¬ programmable controls for frame rate, ¬ embedded 2 kilobits of one-time mirror and flip, cropping, and windowing programmable (OTP) memory for customer use ¬ supports output formats: 10-bit RAW RGB-Ir ¬ programmable I/O drive capability ¬ supports images sizes: - 1080p (1920x1080) - 720p (1280x720) ¬ light sensing mode (LSM) ¬ RGB-Ir in a 4x4 pattern ¬ active array size: 1920 x 1080 ¬ input clock frequency: 6 ~ 27 MHz ¬ power supply: - core: 1.2V - analog: 2.8V - I/O: 1.8V ¬ maximum image transfer rate: - 1080p: 60 fps - 720p: 90 fps ¬ sensitivity: 553 mV/lux-sec (6750 e-/lux.sec) ¬ power requirements: - active: 90 mW - standby: 210 µA - XSHUTDN: 0.6 µA ¬ standard serial SCCB interface ¬ scan mode: progressive ¬ temperature range: - operating: -30°C to +85°C junction temperature - stable image: 0°C to +60°C junction temperature ¬ maximum exposure interval: 1112 × tROW ¬ pixel size: 1.4 µm x 1.4 µm ¬ dark current: 10 e-/sec @ 50°C junction temperature ¬ output format: 10-bit RAW RGB-Ir data ¬ image area: 2728.8 µm x 1549.8 µm ¬ lens size: 1/6" ¬ lens chief ray angle: 33° non-linear ¬ package dimensions: - COB: 3825 µm x 2889 µm Functional Block Diagram OV2744 10-bit ADC AMP ISP row select image array image interface MIPI TX image sensor processor FIFO image sensor core column sample/hold MCP/N MDP/N[1:0] gain control control register bank 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.1, January, 2016 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com SDA SID SCCB interface SCL STROBE PWDNB FSIN GPIO TM XSHUTDN timing generator and system control logic XSHUTDN2 PLL XVCLK PLL OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision, the OmniVision logo and PureCel are registered trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.