New Product New Introduction Product Introduction NEW! PAN1326/1316 SERIES BLUETOOTH® LOW ENERGY RF MODULES Dual-Mode Wireless Bluetooth Connectivity and Bluetooth Low Energy Introducing Panasonic’s latest breakthrough in wireless networking, the NEW PAN1326/1316 Series RF Modules featuring both Bluetooth Low Energy and Bluetooth connectivity. This powerful new technology combination creates a low cost, ultra-low power wireless networking solution for short range applications. The Bluetooth Low Energy (BLE) standard is designed to reduce power consumption by establishing very fast connections (few ms) and transferring P small amounts of data. Using these techniques, energy consumption is reduced i to a tenth of Classic Bluetooth. Bluetooth Low Energy devices can be put into a Cut the Cable sleep mode and activated for event activities such as sending files to a gateway, PC or mobile phone. Furthermore, the maximum power consumption is less than 15 mA and the average power consumptionBluetooth-Module is about 1 uA. Thus, a small PAN1450 coin cell – such as a CR2032 – is capable of powering a device for up to 10 years of operation. TM OUTLINES - ENW89803J The NEW PAN1326/1316 Host Controlled Interface (HCI) Series also brings The PAN1450 provides wireless interface per the BT 1.2 Texas Instrument’s CC2564, to an easy-to-use module format. Panasonic’s tiny and BT compliance testing have specification. Interoperability been completed for the BT Chip ZV4301 from Zeevo, Inc. to 2 footprint technology offers a module of only 85.5 mm including antenna. The facilate rapid time-to-market. The BT Chip incorporates a widely popular 32-bit ARM7TDMI modules are designed to accommodate PCBs pad pitch of 1.3mmCPU and assufficient littlebandwidth to support a wide range of core with embedded µController applications and the module provides as two layers for easy implementation and manufacture. full ARM7 software development access. TM • • • • FEATURES Supply Voltage Range: 1.7 - 4.8V Overview Profiles: SPP, A2DP and AVRCP - Inquiry results with RSSI (1.2) - Adaptive frequency hopping (AFH) enabled (1.2) Based upon TI’s CC2564 - High throughput (>600 kbps) - Hold-, Park- and Sniffmode Integrates with TI’s ultra low-power MSP430 - Up to 128 bit encryption - Audio capability on an SCO channel microprocessor - Support for very low power modes - sleep and deep sleep bluetooth data rates (up to 57,6/723,2Kbps) • Very- Allfast algorithm for both ACL and eSCO User Interfaces • Supports Extended Range Tx power with 10dBm - Full-speed USB version 2.0 compliant - Programmable baud rate UART (9,6 Kbps - 921,6 Kbps) typical output - Debug UART (DUART) General Purpose I/O‘s (interruptible) • Low-- 16 power scan method for page and inquiry scans PCM audio (1 channel) - SPI and JTAG interface at 1/3rd normal power Part Numbers Description ENW-89823A2JF PAN1326, CC2564, Bluetooth & Bluetooth Low Energy, HCI module, antenna ENW-89823C2JF PAN1316, CC2564, Bluetooth & Bluetooth Low Energy, HCI module, no antenna TH QUAL OO B01839 PR ED PAN1326 and PAN1316 Part Numbers: Radio Features - High sensitivity design (-86 dBm typ.) - Integrated RF shield - Class 2 module (0dBm typ. output power) - One antenna port IF I M ODULES IRELESS • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking) • Fully Qualified Bluetooth v4.0 EDR • Dimensions PAN1326: 9mm x 9.5mm x 1.8mm (width x length x height) • Dimensions PAN1316: 6.5mm x 9mm x 1.7mm (width x length x height) • Certifications: Bluetooth, FCC, IC and CE • Operating Temperature Range: -20ºC to +70ºC BLUET W Product Performance: The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³ SMD package and the only external component needed is an 50 ohm antenna. Any customizations for the software can be handled with our recommended partners. NEW Bluetooth Low Energy ODUCT Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1450 Rev. A Development and Evaluation Part Numbers: Part Numbers Description ENW-89825A2JF PAN1323ETU, Development Module for PAN1315, PAN1316, PAN1317, PAN1325, PAN1326, PAN1327 EVAL_PAN1323 EVAL_PAN1323, Development Kit for PAN1315, PAN1316, PAN1317, PAN1325, PAN1326, PAN1327 www.panasonic.com/rfmodules [email protected] 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1326NPI Rev. 1.0, FY11-075-XXX New Product New Introduction Product Introduction Block Diagram PAN1326: Interfaces: The PAN1326/PAN1316 Host Controlled Interface supports several transport layers with the following features: • UART Rates of up to 4Mbps • Three and Four Wire UART Transport Applications: • Sports and Fitness • Heart Rate Monitor • Blood Pressure Sensor • Blood Glucose Meter • Thermometer • • • • • • Assisted Living • Flood Alarm • Heating Control • Automatic Key Control Industrial Sensors Toys Entertainment Devices Mobile Accessories All Bluetooth Wireless Applications Block Diagram PAN1316: Bluetooth Module Pin Compatibility: Series Description PAN1315 BT Classic PAN1316 BT and BLE PAN1317 Dual Mode BT and ANT PAN1325 BT Classic with antenna PAN1326 BT and BLE with antenna PAN1327 Dual Mode BT and ANT with antenna Compatibility 100% Pin Compatible 100% Pin Compatible All Panasonic Bluetooth RF Modules are 100% pin compatible with the next generation of Bluetooth Classic and Low Energy devices. This unique design feature enables designers to seamlessly transition between Bluetooth Classic, Low Energy and ANT enabled modules, addressing larger markets and providing migration paths to circumvent obsolescence. Technical Specifications for PAN1326 and PAN1316: Parameter Receiver Sensitivity (BER=10-3) Value -93 dBm Condition / Notes GFSK, Typical, Dirty TX On Output Power 10 dBm VDD_In = VBAT Power Supply 1.7 - 4.8 V Battery or DC/DC Ultra Low Power Scan 135 uA 1.28s Interval GFSK DH1\DH5 33 mA Full Throughput -20°C to + 70°C -40°C to + 85°C Optional Operating Temperature Range www.panasonic.com/rfmodules [email protected] 1-800-344-2112 Copyright © 2011 Panasonic Corporation of North America. All Rights Reserved. Specifications are subject to change without notice. PAN1326NPI Rev. 1.0, FY11-075-XXX