Tap/Isolator Hybrid Tap – Isolator Hybrid Specifications Parameter Single Stage Dual Stage Wavelength Range 1535-1565 nm 1530-1570 nm ≤ 0.7 dB ≤ 0.9 dB Insertion Loss in Signal Channel (for 1% tap ratio) Insertion Loss in Tap Channel ≤ 14 dB (5% tap), ≤ 20.8 dB (1% tap) Tap Ratio 1% or customized Isolation Band (at 23° C) ≥ 30 dB ≥ 43 dB Return Loss ≥ 45 dB Maximum Power 300 mW PDL ≤ 0.1 dB ≤ 0.15 dB PMD ≤ 0.25 ps ≤ 0.1 ps Directivity ≥ 50 dB Operating Temperature -5° C ~ + 65° C Storage Temperature - 40° C ~ + 85° C Package Dimensions 5.5 mm (Ф) x 35 mm (L) Note1: All values specified are without connectors. Note2: Higher performance specifications available upon request. Note3: Fiber type Corning SMF-28e. Ordering Information T I – – Stage Type S: Single Stage D: Dual Stage – Tap Ratio 01: 1% 02: 2% 05: 5% 10: 10% – Fiber Length A: 1 meter B: 1.5 meter S: Special 2210 Lind Ave SW, Suite 100 Renton, WA 98057 USA (425) 277-8000 ph (425) 277-5280 fax – Pigtail Style (=Package style) B: bare fiber L: 900 m loose tube Connector 0: None 7: LC/UPC 1: FC/PC 8: LC/SPC 2: FC/APC 9: Special 3: SC/ PC A: FC/UPC 4: SC/APC B: SC/UPC 5: FC/SPC C: ST 6: SC/SPC [email protected] www.lightel.com