1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL CONTACT MATERIAL: PHOSPHOR BRONZE CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: FOR 1.00 MM A ENVIRONMENTAL OPERATING TEMPERATURE: -25 UP TO 85°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING:1A WORKING VOLTAGE: 50V AC CONTACT RESISTANCE: 20 mΩ MAX WIRE DIMENSION: AWG: AWG 32 - 28 B PACKAGING 15 KPCS REEL C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 APPROVAL: BBu UNIT: MM DESCRIPTION: WR-WTB 1.00 MM FEMALE CRIMP TERMINAL SIZE WERI PART NO: 665 001 137 22 A4 SCALE: A 29-JUL-14 PDF AS REV DATE FILE BY SHEET: 1/3 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: BBu B UNIT: MM DESCRIPTION: WR-WTB 1.00 MM FEMALE CRIMP TERMINAL SIZE WERI PART NO: 665 001 137 22 A4 SCALE: A 11-SEP-14 PDF AS SHEET: 2/3 REV DATE FILE BY DRAW: AS D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D