Silicon Avalanche Diodes 600W Surface Mount Transient Voltage Supressors P6SMBJ Series ® FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty cycle): 0.01% • Fast response time: typically less than 1.0ps from 0 Volts to BV for unidirectional types • Typical IR less than 1 mA above 10V • High Temperature soldering: 250˚C/10 seconds at terminals MAXIMUM RATINGS @25˚C AMBIENT TEMPERATURE AND CHARACTERISTICS (unless otherwise noted) • Plastic packages has Underwriters Laboratory Flammability 94V-O MECHANICAL CHARACTERISTICS • Case:JEDEC DO214AA. Molded plastic over glass passivated junction • Terminal: Solder plated, solderable per MIL-STD-750 Method 2026 • Polarity. Color band denotes positive end(cathode) except Bidirectional • Standard Packaging: 12mm tape(EIA STF RS-481) • Weight: 0.003 ounce, 0.093 gram VALUE UNIT PPPM Min 600 Watts Peak pulse current of on 10\1000µs waveform (note 1, FIG.3) IPPM Peak forward Surge Current, 8.3ms Single Half SIne Wave Superimposed on Rated Load, (JEDEC Method) (note 2.3) IPSM Operating junction and Storage Temperature Range DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types SMBJ5.0 thru types SMBJ110(e.g. SMBJ5.OC, SMBJ170CA) Electrical characteristics apply in both directions Agency Approvals: Recognized under the Components Program of Underwriters Laboratories. Agency File Number: E128662 SYMBOL Peak pulse power Dissipation on 10/1000µs waveform (note 1,2, FIG.1) PARAMETER CA Voltage Bi-Directional 5% Voltage Tolerance 6 100 -55 to +150 -55 to +150 Amps °C Note 1. Non-repetitive current pulse, per Fig.3 and derated above TA= 25˚C per Fig.2 Note 2. Mounted on 5.0mm2(0.03mm thick) Copper Pads to each terminal Note 3. 8.3 ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minute ORDERING INFORMATION P6SMBJ Tj, TsTG SEE TABLE 1 Amps w w w. l i t t e l f u s e . c o m Silicon Avalanche Diodes 600W Surface Mount Transient Voltage Supressors P6SMBJ Series ® ELECTRICAL SPECIFICATION @ Tamb 25°C Part Number (Uni) Part Number (Bi) P6SMBJ 6.8A P6SMBJ 7.5A P6SMBJ 8.2A P6SMBJ 9.1A P6SMBJ 10A P6SMBJ 11A P6SMBJ 12A P6SMBJ 13A P6SMBJ 15A P6SMBJ 16A P6SMBJ 18A P6SMBJ 20A P6SMBJ 22A P6SMBJ 24A P6SMBJ 27A P6SMBJ 30A P6SMBJ 33A P6SMBJ 36A P6SMBJ 39A P6SMBJ43A P6SMBJ 47A P6SMBJ 51A P6SMBJ 56A P6SMBJ 62A P6SMBJ 68A P6SMBJ 75A P6SMBJ 82A P6SMBJ 91A P6SMBJ 100A P6SMBJ 110A P6SMBJ 120A P6SMBJ 130A P6SMBJ 150A P6SMBJ 160A P6SMBJ 170A P6SMBJ 180A P6SMBJ 200A P6SMBJ 220A P6SMBJ 250A P6SMBJ 300A P6SMBJ 350A P6SMBJ 400A P6SMBJ 440A P6SMBJ 480A P6SMBJ 510A P6SMBJ 530A P6SMBJ 540A P6SMBJ 550A P6SMBJ 6.8CA P6SMBJ 7.5CA P6SMBJ 8.2CA P6SMBJ 9.1CA P6SMBJ 10CA P6SMBJ 11CA P6SMBJ 12CA P6SMBJ13CA P6SMBJ 15CA P6SMBJ 16CA P6SMBJ 18CA P6SMBJ 20CA P6SMBJ 22CA P6SMBJ 24CA P6SMBJ 27CA P6SMBJ 30CA P6SMBJ 33CA P6SMBJ 36CA P6SMBJ 39CA P6SMBJ 43CA P6SMBJ 47CA P6SMBJ 51CA P6SMBJ 56CA P6SMBJ 62CA P6SMBJ 68CA P6SMBJ 75CA P6SMBJ 82CA P6SMBJ 91CA P6SMBJ 100CA P6SMBJ 110CA P6SMBJ 120CA P6SMBJ 130CA P6SMBJ 150CA P6SMBJ 160CA P6SMBJ 170CA P6SMBJ 180CA P6SMBJ 200CA P6SMBJ 220CA P6SMBJ 250CA P6SMBJ 300CA P6SMBJ 350CA P6SMBJ 400CA P6SMBJ 440CA P6SMBJ 480CA P6SMBJ 510CA P6SMBJ 530CA P6SMBJ 540CA P6SMBJ 550CA UNI BI Reverse Stand off Voltage VR (Volts) 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 400A 440A 480A 510A 530A 540A 550A 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C 250C 300C 350C 400C 440C 480C 510C 530C 540C 550C 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 477.00 459.00 495.00 Device Marking Code Breakdown Voltage VBR (Volts) @ IT MIN 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 MAX 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 Test Current IT (mA) 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Clamping Voltage VC @ IPP (Volts) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @ VR (µA) 58.1 54.0 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22.0 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.2 6.6 5.9 5.4 4.9 4.5 4.0 3.7 3.4 2.9 2.8 2.6 2.5 2.2 1.9 1.8 1.5 1.3 1.1 1.0 0.9 0.9 0.8 0.8 0.8 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. The available parts are "A" type only, the parts without A (VBR is ± 10%) is not available. w w w. l i t t e l f u s e . c o m 7 Silicon Avalanche Diodes 600W Surface Mount Transient Voltage Supressors P6SMBJ Series ® Ratings and Characteristic Curves TA=25˚C unless otherwise noted Fig. 1 Peak Pulse Power Rating Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % PPPM- Peak Pulse Power (KW) 100 10 1 0.2x0.2"(5.0x5.0mm) Copper Pad Areas 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms Fig. 2 Pulse Derating Curve 100 75 50 25 0 25 0 10ms 6000 TJ=25˚C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM CJ-Junction Capacitance (pF) IPPM- Peak Pulse Current, % I RSM 100 2 50 10/1000µsec. Waveform as defined by R.E.A td 0 Measured at Zero Bias 1000 Half Value IPPM 0 VR, Measured at Stand-Off Voltage, VWM 100 2.0 3.0 1.0 4.0 TJ=25˚C f=1.0MHZ Vsig=50mVp-p Uni-Directional Bi-Directional 10 1.0 100 125 150 175 200 Fig. 4- Typical Junction Capacitance Fig. 3 Pulse Waveform 150 Peak Value IPPM 75 TA- Ambient Temperature (˚C) td- Pulse Width (sec.) tr=10µsec 50 10 200 100 VWM-Reverse Stand-Off Voltage (V) Fig. 6- Maximum Non-Repetitive Peak Forward Surge Current Fig. 5- Typ. Transient Thermal Impedance 200 IPSM-Peak Forward Surge Current (A) Transient Thermal Impedance (˚C/W) 100 10 1.0 0.1 0.001 0.01 0.1 1 10 100 1000 100 10 1 10 Number of Cycles at 60Hz tp- Pulse Duration(sec) 8 8.3 Single Half Sine-Wave (JEDEC Method) Undirectional Only w w w. l i t t e l f u s e . c o m 100 Silicon Avalanche Diodes 600W Surface Mount Transient Voltage Supressors P6SMBJ Series ® Package Outline Dimensions and Pad Layout DO-214AA (SMB J-Bend) Cathode Band 2.16 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 2.74 2.16 2.26 Solder Pads 0.180 (4.57) 0.160 (4.06) All dimensions in mm 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.008 (0.203) MAX 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) Dimensions in inches and (millimeters) w w w. l i t t e l f u s e . c o m 9