Panasonic Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type： ECQUA ［Class Ｘ2］ In accordance with UL/CSA and European safety regulation class X2 ■Features ●Compact ●Flame-retardant plastic case and non-combustible resin ●RoHS directive compliant ■Recommended Applications ●Interference suppressors ■Explanation of Part Numbers 12 E C Q U Dielectric & construction Product code A A F Rated voltage Capacitance Cap. Tol. K ±10% M ±20% Suffix Blank A Straight Cut lead ■Applicable Standard UL 60384-14 Across-The-Line Capacitors Antenna-Coupling and Line-By-Pass Components (0.10 μＦ to 1.0μＦ) CSA CAN/CSA E60384-14 Across-the-line capacitors Antenna-isolation and line-by-pass capacitors (0.10 μＦ to 1.0 μＦ) Europe International EN 60384-14 IEC 60384-14 Class X2 Class X2 (0.10 μＦ to 1.0 μＦ) (0.10 μＦ to 1.0 μＦ) UL Accredited by UL Accredited by VDE ＊When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUA，0.1μF. ＊Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No ■Specifications Category temp. range －40 ℃ to ＋110 ℃ Rated voltage 275 VAC Capacitance range 0.10 to 1.0μF Capacitance tolerance ±10 ％ (K)，±20 ％ (M) Dissipation factor (tanδ) tanδ≦1.0 ％ (20 ℃，1 kHz) Withstand voltage Between terminals: 633 VAC，1183VDC 60s Between terminals to enclosure: 2050 VAC 60 s Insulation resistance (IR) C≦0.33μF : IR≧15000 MΩ (20 ℃, 100 VDC, 60 s) C＞0.33μF : IR≧5000 MΩ・μF （20 ℃, 100 VDC, 60 s） C≦0.47μF :IR≧2000 MΩ（20 ℃, 500 VDC, 60 s） ＊Use of this capacitor is limited to AC voltage (50Hz or 60Hz sine wave). Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Panasonic Plastic Film Capacitors ■Dimensions in mm (not to scale) Marking Example Cut lead (Suffix A) (A) Solder-plated Solder-plated copper-clad steelcopper-clad wire (B) or (C) steel wire Note : only ± 10 % as cap. tol. be marked as “K”. Note Data Code. P（ Lead location limits from center) P (Lead location limits from center) ※≧1.2μF ±1.0 ■Rating & Dimensions ●Capacitance tolerance : ±10 ％ (K)，±20 ％ (M) Part No. ECQUAAF104□（ ECQUAAF154□（ ECQUAAF224□（ ECQUAAF334□（ ECQUAAF474□（ ECQUAAF684□（ ECQUAAF105□（ ） ） ） ） ） ） ） Capacitance (μF) 0.10 0.15 0.22 0.33 0.47 0.68 1.0 Ｌ 17.5 17.5 17.5 17.5 26.0 26.0 26.0 Ｔ 5.0 6.0 7.5 9.0 8.5 10.0 12.0 Dimension （ｍｍ） Ｈ Ｆ 12.0 15.0 13.0 15.0 14.0 15.0 16.0 15.0 15.0 22.5 17.0 22.5 19.0 22.5 φｄ 0.60 0.60 0.60 0.60 0.80 0.80 0.80 Ｐ 0±0.8 0±0.8 0±0.8 0±0.8 0±0.8 0±0.8 0±0.8 Q 1.3 1.3 1.3 1.3 1.8 1.8 1.8 Min. order Q’ty Straight Cut lead 1000 600 500 300 Cap. tol. code Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. 1000 800 500 300