Power Transformers Datasheet

Power Transformers
www.vishay.com
Vishay Custom Magnetics
Custom Capabilities Power Transformers
All Switch Mode Power Topologies
PRODUCT TYPES
OVERALL CAPABILITIES
• Switch mode power topologies: flyback, forward
converter, push / pull, full bridge, half bridge, LLC
resonant, isolated buck
Capabilities:
- Frequencies to 10 MHz+
- Power levels to 10 kVA
• Gate-drive transformers
Capabilities:
- Frequencies to 500 kHz
- MOSFET / IGBT voltages to 1200 V
• Current sense transformers
Capabilities:
- Frequencies from 50 Hz / 60 Hz to > 10 kHz
- Current to 5000 A
• Linear single phase and three phase power transformers
Capabilities:
- Frequencies to 50 Hz / 60 Hz, 400 Hz
- Power levels to 10 kVA
• Operating temperature range from -55 °C to +220 °C
• Designed to meet UL, CSA, VDE, and IEC safety
requirements
• Ruggedized packages for extreme environments
• AEC-Q200 qualified (automotive compliant)
• Space grade compliant to MIL-STD-981
• Multi-site manufacturing - USA, Dominican Republic,
Mexico, China
MATERIAL / PROCESS CAPABILITIES
• Conductor geometries: litz wire, foil, round magnet wire,
rectangular magnet wire, square magnet wire, planar,
stamped windings
• Conductor materials: copper, aluminum
• Core materials: ferrite, powdered iron alloys, MPP, high
flux, Kool Mu®, amorphous, tape wound, laminated
• Terminations: through-hole, SMD, press fit, flying lead
• Potted and vacuum varnish impregnated
• Lead (Pb)-free capability
• Automated winding, soldering, assembly, and test
capability
• SOLIDWORKS® and AutoCAD 3D design software
INDUSTRIES SERVED
To view our custom magnetics application capabilities brochure, click below.
• Automotive
• Avionics
• Military
• Test and instrumentation
• Medical
• Space
• Industrial controls
• Alternative energy
CONTACT INFORMATION
For design assistance, please contact: [email protected]
To order products, please use the electronic order form: www.vishay.com/marcom/qa/wb1169/transformerform.html
Revision: 08-Mar-16
Document Number: 34398
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000