Aluminum Electrolytic Capacitors/ FK Surface Mount Type FK Series: Type: V ■ Features ● Endurance: 2000 h to 5000 h at 105 °C ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (φ8 mm and larger) ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat –55 °C to +105 °C 6.3 V.DC to 100 V.DC 3.3 µF to 6800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached standard products list W.V. (V) 6.3 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ( > φ12.5 and suffix “G” in φ8҂10.2, φ10҂10.2 are 5000 hours) Capacitance change ±30 % of initial measured value (Suffix “G” is 35 %) tan δ < 200 % of initial specified value (Suffix “G” is 300 %) DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan δ < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current 50, 60 0.70 Correction factor 100 k to 1.00 Series identification Negative polarity marking (–) j FK Lot number + L Mark for Lead-Free ProductsBlack Dot (Square) (P) B±0.2 Capacitance (µF) H φD±0.5 Rated Voltage Mark 22 A±0.2 – (I) 0.3 max. K ■ Dimensions in mm (not to scale) Example:6.3 V 22 µF, 6.3 V 3300 µF Marking color : BLACK < φ10 W Pressure Relief (φ10 and larger) ( ) Reference size (mm) > φ12.5 Rated Voltage Mark Capacitance (µF) Negative polarity marking (–) 3300 j FK Series identification Lot number Rated Voltage Mark j A C E V 10 k 0.95 (I) ■ Marking Frequency (Hz) 1k 0.90 120 0.75 6.3 V 10 V 16 V 25 V 35 V H J K 2A 50 V 63 V 80 V 100 V Size code B D L A,B I W P K 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 +- 1.5 0.2 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +- 1.5 0.2 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 1.5 0.2 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 +- 1.5 0.2 0.70±0.2 H F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE63 – 03 Sep. 2011 Aluminum Electrolytic Capacitors/ FK ■ Standard Products Endurance : 105 °C 2000 h ( > φ12.5 : 5000 h) Case size W.V. (V) Cap. (±20 %) (µF) 22 47 100 220 6.3 330 470 1000 1500 3300 6800 22 33 150 220 10 330 470 680 1000 2200 4700 6800 10 22 47 16 68 100 150 220 330 470 680 1500 3300 4700 10 22 33 47 68 100 25 150 220 330 470 1000 1500 2200 3300 Dia. Length (mm) 4 4 5 5 6.3 6.3 6.3 8 8 8 10 12.5 16 4 4 5 6.3 6.3 8 8 8 8 10 12.5 16 18 4 4 5 5 6.3 6.3 6.3 6.3 6.3 8 8 8 10 12.5 16 18 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 12.5 16 16 18 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 13.5 16.5 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 16.5 16.5 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 6.2 10.2 10.2 10.2 13.5 16.5 16.5 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 16.5 16.5 16.5 Min. Packaging Q'ty Specification ✽Size Code B (B) C (C) D D D8 E F F G H13 J16 B (B) C D D8 E F F F G H13 J16 K16 B (B) C (C) D D D D8 D8 E F F G H13 J16 K16 B C (C) D D D D8 E F F F G H13 J16 J16 K16 Ripple Impedance tan δ Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (액) EEEFK0J220R 90 1.35 0.26 EEEFK0J470UR 90 1.35 0.26 EEEFK0J470R 160 0.70 0.26 EEEFK0J101UR 160 0.70 0.26 EEEFK0J101P 240 0.36 0.26 EEEFK0J221P 240 0.36 0.26 EEEFK0J331XP 280 0.34 0.26 EEEFK0J331P 300 0.26 0.26 EEEFK0J471P 600 0.16 0.26 EEEFK0J102P 600 0.16 0.26 EEEFK0J152P 850 0.08 0.26 EEVFK0J332Q 1100 0.06 0.30 EEVFK0J682M 1800 0.035 0.36 EEEFK1A220R 90 1.35 0.19 EEEFK1A330UR 90 1.35 0.19 EEEFK1A330R 160 0.70 0.19 EEEFK1A151P 240 0.36 0.19 EEEFK1A221XP 280 0.34 0.19 EEEFK1A221P 300 0.26 0.19 EEEFK1A331P 600 0.16 0.19 EEEFK1A471P 600 0.16 0.19 EEEFK1A681P 600 0.16 0.19 EEEFK1A102P 850 0.08 0.19 EEVFK1A222Q 1100 0.06 0.21 EEVFK1A472M 1800 0.035 0.25 EEVFK1A682M 2060 0.033 0.29 EEEFK1C100R 90 1.35 0.16 EEEFK1C220UR 90 1.35 0.16 EEEFK1C220R 160 0.70 0.16 EEEFK1C470UR 160 0.70 0.16 EEEFK1C470P 240 0.36 0.16 EEEFK1C680P 240 0.36 0.16 EEEFK1C101P 240 0.36 0.16 EEEFK1C151XP 280 0.34 0.16 EEEFK1C221XP 280 0.34 0.16 EEEFK1C221P 300 0.26 0.16 EEEFK1C331P 600 0.16 0.16 EEEFK1C471P 600 0.16 0.16 EEEFK1C681P 850 0.08 0.16 EEVFK1C152Q 1100 0.06 0.16 EEVFK1C332M 1800 0.035 0.20 EEVFK1C472M 2060 0.033 0.22 EEEFK1E100R 90 1.35 0.14 EEEFK1E220R 160 0.70 0.14 EEEFK1E330UR 160 0.70 0.14 EEEFK1E330P 240 0.36 0.14 EEEFK1E470P 240 0.36 0.14 EEEFK1E680P 240 0.36 0.14 EEEFK1E101XP 280 0.34 0.14 EEEFK1E101P 300 0.26 0.14 EEEFK1E151P 600 0.16 0.14 EEEFK1E221P 600 0.16 0.14 EEEFK1E331P 600 0.16 0.14 EEEFK1E471P 850 0.08 0.14 EEVFK1E102Q 1100 0.06 0.14 EEVFK1E152M 1800 0.035 0.14 EEVFK1E222M 1800 0.035 0.16 EEVFK1E332M 2060 0.033 0.18 ✽ Size code( ):Miniaturization product The taping dimensions are explained on EE188 of our Catalog. Reflow Profile(Fig-1 to Fig-8) listed on EE186 of our Catalog. Reflow (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (3) Taping (pcs) 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 200 125 2000 2000 1000 1000 900 1000 500 500 500 500 200 125 125 2000 2000 1000 1000 1000 1000 1000 900 900 1000 500 500 500 200 125 125 2000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 200 125 125 125 Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE64 – 00 Sep. 2010 Aluminum Electrolytic Capacitors/ FK ■ Standard Products Endurance : 105 °C 2000 h ( > φ12.5 : 5000 h) Case size W.V. (V) Cap. (±20 %) (µF) 4.7 10 22 33 47 68 35 100 150 220 330 470 680 1000 1500 4.7 10 22 33 47 50 100 150 220 330 390 470 560 680 1000 4.7 10 22 63 33 47 68 100 150 220 470 680 3.3 4.7 10 80 22 33 47 68 100 150 330 470 Dia. Length (mm) 4 4 5 5 6.3 6.3 6.3 6.3 8 8 8 10 12.5 12.5 16 16 4 5 6.3 6.3 6.3 8 6.3 8 8 10 10 12.5 12.5 16 16 16 16 5 6.3 6.3 8 8 8 8 10 12.5 12.5 16 18 5 6.3 6.3 8 8 8 10 12.5 12.5 12.5 16 18 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 5.8 5.8 5.8 5.8 7.7 6.2 7.7 6.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 5.8 5.8 7.7 6.2 10.2 10.2 10.2 13.5 13.5 13.5 16.5 16.5 Min. Packaging Q'ty Specification ✽Size Code B (B) C C D D D8 D8 F F F G H13 H13 J16 J16 B (C) D D D8 E D8 E F G G H13 H13 J16 J16 J16 J16 C D D8 E F F (F) G H13 H13 J16 K16 C D D8 E F F G H13 H13 H13 J16 K16 Ripple Impedance tan δ Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (액) EEEFK1V4R7R 90 1.35 0.12 EEEFK1V100UR 90 1.35 0.12 EEEFK1V100R 160 0.70 0.12 EEEFK1V220R 160 0.70 0.12 EEEFK1V330P 240 0.36 0.12 EEEFK1V470P 240 0.36 0.12 EEEFK1V680XP 280 0.34 0.12 EEEFK1V101XP 280 0.34 0.12 EEEFK1V101P 600 0.16 0.12 EEEFK1V151P 600 0.16 0.12 EEEFK1V221P 600 0.16 0.12 EEEFK1V331P 850 0.08 0.12 EEVFK1V471Q 1100 0.06 0.12 EEVFK1V681Q 1100 0.06 0.12 EEVFK1V102M 1800 0.035 0.12 EEVFK1V152M 1800 0.035 0.12 EEEFK1H4R7R 60 2.90 0.10 EEEFK1H100UR 85 1.52 0.10 EEEFK1H100P 165 0.88 0.10 EEEFK1H220P 165 0.88 0.10 EEEFK1H330XP 195 0.68 0.10 EEEFK1H330P 195 0.68 0.10 EEEFK1H470XP 195 0.68 0.10 EEEFK1H470P 195 0.68 0.10 EEEFK1H101P 350 0.34 0.10 EEEFK1H151P 670 0.18 0.10 EEEFK1H221P 670 0.18 0.10 EEVFK1H331Q 900 0.12 0.10 EEVFK1H391Q 900 0.12 0.10 EEVFK1H471M 1610 0.073 0.10 EEVFK1H561M 1610 0.073 0.10 EEVFK1H681M 1610 0.073 0.10 EEVFK1H102M 1610 0.073 0.10 EEEFK1J4R7R 50 3.00 0.08 EEEFK1J100P 80 1.50 0.08 EEEFK1J220XP 120 1.20 0.08 EEEFK1J220P 120 1.20 0.08 EEEFK1J330P 250 0.65 0.08 EEEFK1J470P 250 0.65 0.08 EEEFK1J680UP 250 0.65 0.08 EEEFK1J101P 400 0.35 0.08 EEVFK1J151Q 800 0.16 0.08 EEVFK1J221Q 800 0.16 0.08 EEVFK1J471M 1410 0.082 0.08 EEVFK1J681M 1690 0.08 0.08 EEEFK1K3R3R 25 5.00 0.08 EEEFK1K4R7P 40 3.00 0.08 EEEFK1K100XP 60 2.40 0.08 EEEFK1K100P 60 2.40 0.08 EEEFK1K220P 130 1.30 0.08 EEEFK1K330P 130 1.30 0.08 EEEFK1K470P 200 0.70 0.08 EEVFK1K680Q 500 0.32 0.08 EEVFK1K101Q 500 0.32 0.08 EEVFK1K151Q 500 0.32 0.08 EEVFK1K331M 793 0.17 0.08 EEVFK1K471M 917 0.153 0.08 ✽ Size code( ):Miniaturization product The taping dimensions are explained on EE188 of our Catalog. Reflow Profile(Fig-1 to Fig-8) listed on EE186 of our Catalog. Reflow (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (3) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (3) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (3) (3) Taping (pcs) 2000 2000 1000 1000 1000 1000 900 900 500 500 500 500 200 200 125 125 2000 1000 1000 1000 900 1000 900 1000 500 500 500 200 200 125 125 125 125 1000 1000 900 1000 500 500 500 500 200 200 125 125 1000 1000 900 1000 500 500 500 200 200 200 125 125 Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE65 – 00 Sep. 2010 Aluminum Electrolytic Capacitors/ FK ■ Standard Products Endurance : 105 °C 2000 h ( > φ12.5 : 5000 h) Case size W.V. (V) 100 Cap. (±20 %) (µF) 22 33 47 68 100 150 220 330 Dia. Length (mm) 8 10 12.5 12.5 16 16 18 18 (mm) 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 ✽Size Code F G H13 H13 J16 J16 K16 K16 Ripple Impedance tan δ Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (액) EEEFK2A220P 130 1.30 0.07 EEEFK2A330P 200 0.70 0.07 EEVFK2A470Q 500 0.32 0.07 EEVFK2A680Q 500 0.32 0.07 EEVFK2A101M 793 0.17 0.07 EEVFK2A151M 793 0.17 0.07 EEVFK2A221M 917 0.153 0.07 EEVFK2A331M 917 0.153 0.07 ✽ Size code( ):Miniaturization product The taping dimensions are explained on EE188 of our Catalog. Reflow Profile(Fig-1 to Fig-8) listed on EE186 of our Catalog. (V) 6.3 10 16 25 35 50 (µF) 470 1000 1500 330 470 680 1000 330 470 680 150 220 330 470 100 150 220 330 100 150 220 Dia. Length (mm) 8 8 10 8 8 8 10 8 8 10 8 8 8 10 8 8 8 10 8 10 10 (mm) 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 (2) (2) (3) (3) (3) (3) (3) (3) Taping (pcs) 500 500 200 200 125 125 125 125 Endurance : 105 °C 5000 h Case size Cap. (±20 %) Reflow Please use it as a reference guide. ■ Endurace 5000 h Products W.V. Min. Packaging Q'ty Specification Min. Packaging Q'ty Specification Size Code F F G F F F G F F G F F F G F F F G F G G Ripple Impedance tan δ Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (액) EEEFK0J471GP 600 0.16 0.26 EEEFK0J102GP 600 0.16 0.26 EEEFK0J152GP 850 0.08 0.26 EEEFK1A331GP 600 0.16 0.19 EEEFK1A471GP 600 0.16 0.19 EEEFK1A681GP 600 0.16 0.19 EEEFK1A102GP 850 0.08 0.19 EEEFK1C331GP 600 0.16 0.16 EEEFK1C471GP 600 0.16 0.16 EEEFK1C681GP 850 0.08 0.16 EEEFK1E151GP 600 0.16 0.14 EEEFK1E221GP 600 0.16 0.14 EEEFK1E331GP 600 0.16 0.14 EEEFK1E471GP 850 0.08 0.14 EEEFK1V101GP 600 0.16 0.12 EEEFK1V151GP 600 0.16 0.12 EEEFK1V221GP 600 0.16 0.12 EEEFK1V331GP 850 0.08 0.12 EEEFK1H101GP 350 0.34 0.10 EEEFK1H151GP 670 0.18 0.10 EEEFK1H221GP 670 0.18 0.10 The taping dimensions are explained on EE188 of our Catalog. Reflow Profile(Fig-1 to Fig-8) listed on EE186 of our Catalog. Reflow (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) Taping (pcs) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE66 – 01 Jun. 2011