IMC-0402-01 www.vishay.com Vishay Dale Wirewound, Surface Mount Inductors FEATURES • Excellent solderability and resistance to soldering heat • Suitable for reflow soldering • High reliability and easy surface mount assembly • Wide range of inductance values available • Tape and reel packaging for automatic handling, 10 000/reel EIA 481 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS TEST SRF DCR RATED DC FREQ. MIN. MAX. CURRENT (MHz) Q (MHz) () (mA) (1) L & Q MIN. 250 13 6000 0.045 1360 250 16 6000 0.070 1040 250 16 6000 0.070 1040 250 18 6000 0.070 960 250 16 6000 0.068 790 250 16 6000 0.120 640 250 20 6000 0.066 840 250 20 6000 0.066 840 250 20 6000 0.066 840 250 18 6000 0.091 700 250 15 4775 0.130 640 250 23 5800 0.083 800 250 23 5800 0.083 760 250 23 5800 0.083 760 250 20 4800 0.083 680 250 25 5800 0.104 680 250 25 4400 0.104 680 250 18 4100 0.200 480 250 25 4160 0.104 680 250 18 4000 0.200 680 250 23 3900 0.195 480 250 26 3680 0.120 640 250 26 3600 0.120 640 250 24 3450 0.210 560 250 26 3280 0.172 560 250 24 3100 0.220 560 250 25 3100 0.230 420 250 26 3040 0.202 480 250 25 3000 0.250 420 250 25 2800 0.300 400 250 26 2720 0.214 400 250 25 2700 0.298 400 250 26 2480 0.300 400 250 25 2350 0.300 400 250 24 2350 0.350 400 250 26 2320 0.403 320 250 25 2100 0.550 320 250 26 2240 0.438 320 250 25 2030 0.810 100 200 26 2100 0.830 150 200 25 1750 0.820 100 200 22 1760 0.970 100 200 22 1620 1.120 100 150 20 1500 1.250 100 150 20 1300 2.520 100 150 20 1100 2.660 100 IND. (nH) TOL. 1.0 0.3 nH, 0.2 nH 1.9 0.3 nH, 0.2 nH 2.0 0.3 nH, 0.2 nH 2.2 0.3 nH, 0.2 nH 2.4 0.3 nH, 0.2 nH 2.7 0.3 nH, 0.2 nH 3.3 0.3 nH, 0.2 nH 3.6 0.3 nH, 0.2 nH 3.9 10 %, 5 % 4.3 10 %, 5 % 4.7 10 %, 5 % 5.1 10 %, 5 % 5.6 10 %, 5 % 6.2 10 %, 5 % 6.8 10 %, 5 % 7.5 10 %, 5 % 8.2 10 %, 5 % 8.7 10 %, 5 % 9.0 10 %, 5 % 9.5 10 %, 5 % 10 5 %, 2 % 11 5 %, 2 % 12 5 %, 2 % 13 5 %, 2 % 15 5 %, 2 % 16 5 %, 2 % 18 5 %, 2 % 19 5 %, 2 % 20 5 %, 2 % 22 5 %, 2 % 23 5 %, 2 % 24 5 %, 2 % 27 5 %, 2 % 30 5 %, 2 % 33 5 %, 2 % 36 5 %, 2 % 39 5 %, 2 % 40 5 %, 2 % 43 5 %, 2 % 47 5 %, 2 % 51 5% 56 5% 68 5% 82 5% 100 5% 120 5% Note (1) Value obtained when current flows and temperature has risen 15 °C ELECTRICAL SPECIFICATIONS Inductance Range: 1 nH to 47 nH Operating Temperature: - 40 °C to + 125 °C Storage Temperature: - 40 °C to + 125 °C TEST EQUIPMENT • Inductance is measured in HP4287A RF LCR meter with HP16193 fixture • Q is measured in HP4287A RF LCR meter with HP16193 fixture • SRF is measured in HP8753E RF network analyzer • DCR is measured in HP4338B millohmeter DIMENSIONS in inches [millimeters] 0.039 ± 0.004 [1.00 ± 0.1] 0.022 ± 0.004 [0.55 ± 0.1] 0.008 ± 0.004 [0.20 ± 0.1] 0.020 ± 0.004 [0.50 ± 0.1] 0.010 ref. [0.25] DESCRIPTION IMC-0402-01 MODEL 10 nH INDUCTANCE VALUE ±5% INDUCTANCE TOLERANCE ER PACKAGE CODE e4 JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M C PRODUCT FAMILY Revision: 18-Sep-13 0 4 0 SIZE 2 E R PACKAGE CODE 1 0 INDUCTANCE VALUE N J TOL. 0 1 SERIES Document Number: 34163 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IMC-0402-01 www.vishay.com Vishay Dale PERFORMANCE GRAPHS (IMC-0402-01) IMC-0402-01 Q vs. FREQUENCY 160 140 12 nH 27 nH 5.6 nH 120 47 nH Q 100 80 60 40 1 nH 20 0 1 10 100 1000 FREQUENCY (MHz) IMC-0402-01 Ls vs. FREQUENCY 100 47 nH INDUCTANCE (nH) 27 nH 12 nH 10 5.6 nH 1 1 nH 0 1 10 100 FREQUENCY (MHz) 1000 10 000 TAPE AND REEL SPECIFICATIONS in inches [millimeters] REEL DIMENSIONS TAPE DIMENSIONS 0.08 ± 0.02 [2.0 ± 0.5] RECOMMENDED PATTERN 0.07 ± 0.002 [1.75 ± 0.05] 0.098 [2.5] 0.14 ± 0.002 [3.5 ± 0.05] 0.1 ± 0.002 [0.3 ± 0.05] 0.158 ± 0.004 0.08 ± 0.002 [4.0 ± 0.1] [2.0 ± 0.05] B 0.51 ± 0.02 Ø [13.0 ± 0.5] A C 0.83 ± 0.03 Ø [21.0 ± 0.8] T 7.0 ± 0.08 [178.0 ± 2.0] MODEL IMC-0402-01 Revision: 18-Sep-13 0.315 [8.0] UNITS PER REEL 10 000 0.315 ± 0.008 [8.0 ± 0.2] MODEL IMC-0402-01 0.08 [2.0] ± 0.002 A ± 0.004 [± 0.1] B ± 0.004 [± 0.05] [± 0.1] A B T 0.028 [0.70] 0.047 [1.20] 0.028 [0.70] MODEL IMC-0402-01 A B C 0.018 [0.45] 0.063 [1.60] 0.0256 [0.65] Document Number: 34163 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000