"High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 1 of 10 6/21/2015 General Specifications Part Number Frequency Range Operating Temp 2450AT45A100 2400 - 2500 MHz -40°C to +125°C 3W max. (CW) 50 Ω 1,000 Input Power Impedance Reel Quantity Mechanical Specifications In Terminal Configuration mm L 0.374 ± 0.008 W 0.079 ± 0.008 2.00 ± 0.20 T 0.047 +.004/-.008 1.20 +0.1/-0.2 a 0.020 ± 0.012 0.50 ± 0.30 9.50 ± 0.20 W L No. Function 1 Feeding Point 2 NC a T 1 2 Typical Electrical Specs for "Vertical Orientation" (T=25°C) Frequency Range 2400 - 2500 MHz Peak Gain 9.5 dB min. Return Loss Average Gain 2.2 dBi typ. (XZ-V) 1.0 dBi typ. (XZ-V) Mounting Considerations 1: "Vertical Orientation" Mount these devices with red mark facing up. Units: mm * Line width should be designed to provide 50Ω impedance matching characteristics. 1.0 GND 1.0 10.5 7.5 C 1.8 * GND * 10.5 7.5 * 1.8 1.5pF GND 3.9nH GND a) Without Matching Circuit b) With Matching Circuit: These matching circuit values only apply to Johanson's evaluation board, they will be different on the client's PCB, let us help you with the process of optimizing the layout of our antenna on your board and also calculating your new matching values! See pages 2 and 10 for details. * Trace dimension will depend on the width of the trace required, PCB thickness and distance to side GND for it to have a 50ohm characteristic impedance. Preferably make it a grounded CPWG (co-planar waveguide) type trace Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 2 of 10 6/21/2015 o Typical Electrical Characteristics for "Vertical Orientation" (T=25 C) ) Test Board Orderable Evaluation board: p/n: 2450AT45A100-EB1SMA "Vertical Orientation" 40mm 12 mm 50Ω Feed Line ) GND 1.5pF 20mm 3.9nH GN No Groun d or Metals -Would you like for us to optimize your layout? -Would you like the layout file of the antenna? -Would you like for us to recalculate the matching values and validate/characterize the antenna on your board (fee may apply)? Send us a message at: http://www.johansontechnology.com/ask-a-question It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when antenna is mounted on Johanson's evaluation board. The matching values on client's PCB will be different, go to: http://www.johansontechnology.com/tuning.html and see how to obtain the new values on your own Return Loss a) Without a Matching Circuit a) With a Matching Circuit ) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 3 of 10 6/21/2015 Typical Radiation Patterns for "Vertical Orientation" (@25C) XY cut @2.45GHz Vertical Horizontal ) XY-V/XY-H Z 180° ) X 270° 90° Y 0° XZ-V/XZ-H XY-cut scanning direction XZ cut @2.45GHz Vertical Horizontal Y 180° X 270° 90° Z 0° XZ-cut scanning direction ) YZ cut @2.45GHz Vertical Horizontal YZ-V/YZ-H X 180° Y 270° 90° Z 0° YZ-cut scanning direction Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100 Page 4 of 10 6/21/2015 Typical Electrical Specs for "Horizontal Orientation_1" (T=25°C) Frequency Range 2400 - 2500 MHz Peak Gain Return Loss 9.5 dB min. Average Gain 1.5 dBi typ. (XZ-V) 0.0 dBi typ. (XZ-V) Mounting Considerations 2 - Horizontal Orientation_1 Mount these devices with brown mark facing up. Units: mm *Line width should be designed to provide 50Ω impedance matching characteristics. Units in mm 6.8 GND EVB p/n: 2450AT45A100-EB2SMA Horizontal Orientation_1 1.8 1.5pF 1.5 * C 7.5 GND 1.5 5.0 *These matching circuit values only apply to "C" Dimension will depend on the width of the trace required for it to have a 50ohm characteristic impedance (i.e. coplanar waveguide theory) 1.8 Johanson's evaluation board, they will be different on the client's PCB, see pages 5 and 10 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 5 of 10 6/21/2015 o Typical Electrical Characteristics "Horizontal Orientation_1" (T=25 C) Test Board This 50Ω trace Feed line can be as short as needed, this length is just for reference to our EVB Orderable Evaluation board: p/n: 2450AT45A100-EB2SMA "Horizontal Orientation_1" 20mm 6.8mm 40mm GND No Ground, Metal Layer Keep- GND 19mm 3.9nH -Would you like for us to optimize your layout? -Would you like the layout file of the antenna? -Would you like for us to recalculate the matching values and validate/characterize the antenna on your board (fee may apply)? Send us a message at: http://www.johansontechnology.com/ask-a-question It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when antenna is minted on Johanson's evaluation board. The matching values on client's PCB will be different, go to: http://www.johansontechnology.com/tuning.html and see how to obtain the new values on your own Return Loss a) With Matching Circuit ) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 6 of 10 6/21/2015 Typical Radiation Patterns for "Horizontal Orientation_1" (@25C) ) ) XY-V/XY-H ) Z 180° XY cut @2.45GHz Vertical Horizontal ) X 270° 90° Y 0° XZ-V/XZ-H XY-cut scanning direction XZ cut @2.45GHz Vertical Horizontal Y 180° X 270° 90° Z 0° XZ-cut scanning direction ) YZ-V/YZ-H YZ cut @2.45GHz Vertical Horizontal X 180° Y 270° 90° Z 0° YZ-cut scanning direction Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100 Page 7 of 10 6/21/2015 Typical Electrical Specs for "Horizontal Orientation_2" (T=25°C) Frequency Range 2400 - 2500 MHz Average Gain 9.5 dB min. Peak Gain Return Loss 0.6 dBi typ. (XZ-V) 1.3 dBi typ. (XZ-V) Mounting Considerations 3 - Horizontal Orientation_2 Mount these devices with brown mark facing up. Units: mm * Line width should be designed to provide 50Ω impedance matching characteristics. Units in mm 0.5 10.5 EVB p/n: 2450AT45A100-EB3SMA Horizontal Orientation_2 7.5 GND 0 Ohm 1.8 * 1.5 1.5 GND -Would you like for us to optimize your layout? -Would you like the layout file of the antenna? -Would you like for us to recalculate the matching values and validate/characterize the antenna on your board (fee may apply)? Send us a message at: http://www.johansontechnology.com/ask-a-question It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when antenna is minted on Johanson's evaluation board. The matching values on client's PCB will be different, go to: http://www.johansontechnology.com/tuning.html and see how to obtain the new values on your own Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 8 of 10 6/21/2015 o Typical Electrical Characteristics Horizontal Orientation_2 (T=25 C) Test Board EVB p/n: 2450AT45A100-EB3SMA Horizontal Orientation_2 This 50Ω Feed line can be as short as needed, this length is just for reference to our EVB 50 Feed Line 22.5mm Matching Circuit 8.5mm No Ground GND 11.5mm 11.5mm 40mm -Would you like the layout file of the board? -Need help with the layout? Send us a message at: http://www.johansontechnology.com/ask-a-question 5mm 9.5mm Return Loss a) With Matching Circuit (0ohm) ) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 9 of 10 6/21/2015 Typical Radiation Patterns for "Horizontal Orientation_2" (@25C) ) ) XY-V/XY-H ) Z 180° XY cut @2.45GHz Vertical Horizontal ) X 270° 90° Y 0° XZ-V/XZ-H XY-cut scanning direction XZ cut @2.45GHz Vertical Horizontal Y 180° X 270° 90° Z 0° XZ-cut scanning direction ) YZ-V/YZ-H X 180° YZ cut @2.45GHz Vertical Horizontal Y 270° 90° Z 0° YZ-cut scanning direction Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2.45 GHz High Gain SMD Chip Antenna. AEC-Q200 Qualified. Detail Specification: P/N 2450AT45A100E-AEC Page 10 of 10 6/21/2015 Part Number Explanation P/N Suffix Bulk (loose pieces) Suffix = S E.g.. 2450AT45A100S-AEC Suffix = E T&R E.g.. 2450AT45A100E-AEC Packaging Style* T & R (Reverse) Suffix = R E.g.. 2450AT45A100R-AEC (MOQ Applies) Suffix = None E.g.. 2450AT45A100(S, E, R)-AEC 100% Tin Termination style Tin / Lead Please consult Factory Evaluation Boards 2450AT45A100-EB1SMA (Page 2) (1-port SMA antenna 2450AT45A100-EB2SMA (Page 5) test boards) 2450AT45A100-EB3SMA (Page 8) Storage Conditions and Shelf Life (On T&R or Bulk) Temperature: +5C to +35°C Relative Humidity: 45 to 75% Shelf Life: 18 months max. Packaging information www.johansontechnology.com/ipcpackaging.html Soldering Information www.johansontechnology.com/ipcsoldering-profile Antenna layout and tuning techniques www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services www.johansontechnology.com/ipcantennaservices MSL Info www.johansontechnology.com/technical-notes/msl-rating.html Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.1 Ver 2.2 2013 Johanson Technology, Inc. All Rights Reserved