CURRENT DESIGN ACTIVITY CAGE CODE 0HDW7 AFSR TUCSON OPERATIONS 3724 EAST COLUMBIA STREET TUCSON, ARIZONA 85714 PHONE (520) 519-7400 FAX (520) 519-7454 Alcoa Fastening Systems & Rings THIS DRAWING, THE STRUCTURAL DESIGN DISCLOSED THEREIN AND THE TECHNICAL DATA AND ENGINEERING SERVICE REPRESENTED THEREBY ARE THE EXCLUSIVE PROPERTY OF HUCK INTERNATIONAL, INC. AC H J G K N SCREW ASSEMBLY BEFORE MOUNTING ® ENGINEERING STANDARD H1 TOP PANEL GRIP THK. .060 .005 H2 Q S T TURN-LOC M L R L1 C'BORE IS OPTIONAL SCREW ASSEMBLY AFTER MOUNTING .025±.005 PANEL PREPARATION D W P SL 2 H THREAD SIZE CODE ØD HS 4, 4F, M3 6, 6F, M3.5 8, 8F, M4 10, 10C, 10F, M5 12, 12C, 12F, M6 .325 .356 .420 .451 .531 .444 .449 .559 .599 .604 6 (H1) P, PZ, SL, TS, TW, NR HS (H2) P, PZ, SL, TS, TW, NR .664 .684 .899 .981 .987 .374 .734 .379 .754 .489 .969 .529 1.051 .534 1.057 3 HS TS ØQ ØM ØN +.004 ±.005 ±.005 -.001 J HS P, PZ, SL, TS, TW, NR .481 .494 .606 .641 .641 .411 .424 .536 .571 .571 .265 .280 .385 .427 .428 4, 4F, M3 LENGTH CODE 3 L +.025 -.015 4 1 2 3 4 5 MODEL SERIES .639 .764 .889 1.014 1.139 W P, PZ TW .177 .202 .215 .250 .313 .206 .241 .258 .297 .371 .250 .272 .281 .316 .386 .390 .406 .468 .500 .578 L1 6, 6F, M3.5 L +.025 -.015 8, 8F, M4 L1 .228 .650 .226 .353 .775 .351 .478 .900 .476 .603 1.025 .601 .728 1.150 .726 .185 .209 .223 .257 .323 NR RECESS SIZE ØS ØT Ø R +.004 ±.010 -.001 PART NUMBER CALLOUT FRB ( ) 7500 ( ) -( ) -( )-( ) 1 PZ 6 TW .309 .333 .385 .415 .495 .040 .044 .049 .055 .062 4 4 6 8 10 2 3 4 5 6 10, 10C, 10F, M5 12, 12C, 12F, M6 L +.025 -.015 L1 L +.025 -.015 L1 L +.025 -.015 L1 .685 .810 .935 1.060 1.185 .149 .274 .399 .524 .649 .832 .957 1.082 1.207 1.332 .261 .386 .511 .636 .761 .745 .870 .995 1.120 1.245 .174 .299 .424 .549 .674 TS HS 2 4 6 8 10 3/32 7/64 9/64 5/32 3/16 G THREAD SIZE THREAD SIZE CODE 5 4 8F .164-32 UNC-3A 6 .138-32 UNC-3A 10F .190-32 UNF-3A 8 .164-32 UNC-3A 10 .190-32 UNF-3A 12 .250-28 UNF-3A FINISH 10C .190-24 UNC-3A NONE CLEAR 12C .250-20 UNC-3A B BLACK 4F .112-40 UNC-3A 6F .138-32 UNC-3A RECESS CODE DRIVING RECESS AND SPECIFICATION SINGLE 12F .250-28 UNF-3A M3 M3 x 0.5-4h6h M3.5 SINGLE (COARSE) DOUBLE M4 x 0.7-4h6h M5 M5 x 0.8-4h6h M6 M6 x 1.0-4h6h SLOT RECESS PER ANSI B18.6.3 PZ RECESS PER TYPE 1A ANSI B18.6.3 TS RECESS PER NASM 33781 NR NO RECESS TW RECESS PER NAS 4000 PER DCN 12953, CHANGED FROM Alcoa Fastening Systems AND AFS TO Alcoa Fastening Systems & Rings AND AFSR ISSUED 12/17/2003 PAGE 1 OF 2 .020-.031 .125 B .032-.093 .187 C .094-.155 .250 D .156-.217 .312 E .218-.279 .375 F .280-.341 .437 METRIC 6 CROSS RECESS PER NASM 9006 AC REVISED 3/31/2015 QUAD A DRIVING RECESS AND SPECIFICATION HEX SOCKET RECESS PER ANSI B18.3 P LEAD M3.5 x 0.6-4h6h M4 HS 2 6 THREAD SIZE THREAD SIZE 5 CODE .112-40 UNC-3A CODE RECESS CODE LEAD GRIP K CODE (TOP PANEL GRIP ±.005 THICKNESS) ® TURN-LOC , HIGH PROFILE, OPTIONAL RECESS, ALUM KNOB & SLEEVE, .031 RADIAL FLOAT TOLERANCE UNLESS OTHERWISE NOTED: .X = .05 .XX = .02 .XXX = .015 ANGLES 0.5 DIMENSIONS IN INCHES DRAWN BY CHECKED BY J. SCHLOBOHM SIGNATURE ON FILE FRB( )7500 S-0433 This dra win g/docu mentatio n is control led b y either the De pa rtme nt of Sta te, Intern ationa l Tra ffic In Arms R egu la tio ns or the De partmen t of C ommerce , Expo rt Admi nistratio n Reg ula ti ons an d may req uire a n expo rt li cense /l icen se excep ti on pr ior to bein g tr ansferred to a forei gn na ti ona l, i nsid e or outsid e of th e United States. EAR/ECCN EAR 99. Th ese comm oditie s, techn olo gy or software w ere exp orted from th e Uni te d Sta te s i n accord ance w ith th e Export Admin istration R egu la tio ns. Di versio n contrary to U.S. l aw pro hibi te d. CURRENT DESIGN ACTIVITY CAGE CODE 0HDW7 AFSR TUCSON OPERATIONS 3724 EAST COLUMBIA STREET TUCSON, ARIZONA 85714 PHONE (520) 519-7400 FAX (520) 519-7454 Alcoa Fastening Systems & Rings THIS DRAWING, THE STRUCTURAL DESIGN DISCLOSED THEREIN AND THE TECHNICAL DATA AND ENGINEERING SERVICE REPRESENTED THEREBY ARE THE EXCLUSIVE PROPERTY OF HUCK INTERNATIONAL, INC. AC TURN-LOC ® ENGINEERING STANDARD AVAILABILITY TABLE 4, 4F, M3 GRIP CODE 1 2 3 4 6, 6F, M3.5 5 1 2 3 4 8, 8F, M4 5 A 1 2 3 4 10, 10C, 10F, M5 5 1 2 3 4 O B 12, 12C, 12F, M6 5 1 2 O O O O O O O D O O O O O O O E F O O O O O O O O O O O O O ASSEMBLIES NOT AVAILABLE O O O 4 5 O C O O 3 O O O O O O O O O O FULLY RETRACTABLE ASSEMBLIES ASSEMBLIES NOT FULLY RETRACTABLE (STUD WILL PROTRUDE BELOW MINIMUM TOP PANEL THICKNESS) MATERIAL STUD: HS, NR, P, PZ, & SLOT RECESSES ALL SIZES - CRES PER ASTM-A-493 OR AMS 5636 (302) STUD: TS AND TW RECESSES ALL SIZES - CRES PER AMS 5737 (A-286), HEAT TREAT TO 160 KSI MIN. ULTIMATE TENSILE STRENGTH KNOB : ALUMINUM ALLOY PER QQ-A-225/8, OR AMS 4117 (6061), OR EQ. SLEEVE: ALUMINUM ALLOY PER QQ-A-225/8, OR AMS 4117 (6061), SPRING: CRES PER ASTM-A313 OR AMS 5688 (302) WASHERS: CRES PER AMS 5901 OR AMS 5519 (301) OR EQUIVALENT FINISH NONE: STUD, SPRING, & WASHERS: PASSIVATE PER AMS2700 KNOB & SLEEVE: ANODIZE PER MIL-A-8625, TYPE I I, CLASS I B: STUD & WASHERS: BLACK OXIDE PER MIL-DTL-13924, CLASS 4 (300 SERIES) BLACK OXIDE PER MIL-DTL-13924, CLASS 3 (A-286) KNOB: BLACK ANODIZE PER MIL-A-8625, TYPE I I, CLASS 2 NOTES: 1 LETTERS AT THE END OF PART NUMBER DESIGNATE SPECIAL ASSEMBLIES: DL - ASSEMBLIES WITH DRI LUBE THREADS PER AS5272 PL - ASSEMBLIES WITH PATCH LOCK PER MIL-DTL-18240 2 NO CODE REQUIRED FOR SLOTTED HEADS 3 WHEN USING THE HEX SOCKET CONFIGURATION, ADD .070 TO "L" LENGTH. 4 FOR LONGER LENGTHS, ADD .125 INCREMENTS PER LENGTH CODE 5 -3A THREADS PER ASME B1.1. "M" THREADS PER ASME B1.13M. 6 RECESS IS ONE SIZE SMALLER THAN NOMINAL SIZE REQUIRED FOR 100° FLAT HEAD. 7 COMPONENTS ARE FINISHED PRIOR TO THE ASSEMBLY PROCESS. DISCOLORATION OF THE BLACK ANODIZE MAY OCCUR ON THE CRIMPED PORTION OF THE KNOB DURING ASSEMBLY. A HIGH-ADHESION BLACK PAINT IS PERMITTED FOR TOUCH-UP AFTER ASSEMBLY. INSTALLATION TOOLS: ( ) INDICATES THREAD SIZE CODE ARBOR PRESS TOOL HW7600-( ), REMOVAL ADAPTER TOOL FNR7505-( ), NOSE PIECE HN7513-( ), PULLER HP7523-( ), HANDLE ASSEMBLY TA7533; COMPLETE HAND TOOL ASS'Y: H8603-( ) (INCLUDES NOSE PIECE, PULLER & HANDLE) AC PER DCN 12953, CHANGED FROM Alcoa Fastening Systems AND AFS TO Alcoa Fastening Systems & Rings AND AFSR ISSUED 12/17/2003 REVISED 3/31/2015 PAGE 2 OF 2 ® TURN-LOC , HIGH PROFILE, OPTIONAL RECESS, ALUM KNOB & SLEEVE, .031 RADIAL FLOAT TOLERANCE UNLESS OTHERWISE NOTED: .X = .05 .XX = .02 .XXX = .015 ANGLES 0.5 DIMENSIONS IN INCHES DRAWN BY CHECKED BY J. SCHLOBOHM SIGNATURE ON FILE FRB( )7500 S-0433 This dra win g/docu mentatio n is control led b y either the De pa rtme nt of Sta te, Intern ationa l Tra ffic In Arms R egu la tio ns or the De partmen t of C ommerce , Expo rt Admi nistratio n Reg ula ti ons an d may req uire a n expo rt li cense /l icen se excep ti on pr ior to bein g tr ansferred to a forei gn na ti ona l, i nsid e or outsid e of th e United States. EAR/ECCN EAR 99. Th ese comm oditie s, techn olo gy or software w ere exp orted from th e Uni te d Sta te s i n accord ance w ith th e Export Admin istration R egu la tio ns. Di versio n contrary to U.S. l aw pro hibi te d.