PM SERIES Common Mode Chokes Common mode chokes with Ferrite cores Features - Nominal current in each winding (I): from 0,4A to 6,3A. - Nominal inductance (L): from 0,5mH to 40mH. - Rated voltage: 440Vac. - Test voltage: 1,8kVac winding to winding. "NCJFOUUFNQFSBUVSF$UP$ 4UPSBHFUFNQFSBUVSFGSPN$UP$ - Plastic case: UL 94V-0. - Potting resin: UL94V-0. - According to UL1283. Electrical specifications Code PM400-04HA PM6R8-12HA PM3R3-15HA PM0R7-40HA PM400-06HB PM200-10HB PM6R0-20HB PM1R5-40HB PM0R6-63HB PM4R0-05VA PM2R0-09VA PM0R5-20VA PM4R0-05VB PM2R0-09VB PM0R5-20VB PM110-06VC PM4R0-10VC PM1R0-20VC PM200-10VD PM6R0-20VD PM1R5-40VD PM0R6-63VD PM500-06VE PM330-10VE PM270-14VE PM6R8-20VE PM3R3-40VE PM2R0-60VE IAC (A) 0,4 1,2 1,5 4 0,6 1 2 4 6,3 0,5 0,9 2 0,5 0,9 2 0,6 1 2 1 2 4 6,3 0,6 1 1,4 2 4 6 L (mH) at 10kHz +50% / -30% 2x40 2x6.8 2x3.3 2x0.7 2x40 2x20 2x6.0 2x1.5 2x0.6 2x4.0 2x2.0 2x0.5 2x4.0 2x2.0 2x0.5 2x11 2x4.0 2x1.0 2x20 2x6.0 2x1.5 2x0.6 2x50 2x33 2x27 2x6.8 2x3.3 2x2.0 IZI (Ω) at 100kHz typical 70000 5000 2000 500 400000 30000 5000 1000 300 3000 1600 400 3000 1600 400 10000 4000 900 20000 5000 1200 500 200000 70000 30000 5000 3000 1600 Rdc (mΩ) maximum Case 2x1200 2x200 2x110 2x16 2x1000 2x360 2x100 2x28 2x13 2x500 2x240 2x50 2x500 2x240 2x50 2x600 2x250 2x65 2x500 2x150 2x36 2x15 2x1200 2x700 2x470 2x150 2x58 2x24 HA HA HA HA HB HB HB HB HB VA VA VA VB VB VB VC VC VC VD VD VD VD VF VF VF VF VF VF 143 PM SERIES Common Mode Chokes Common mode chokes with Ferrite cores Dimensions (in mm) PM-H SERIES Code PM-HA PM-HB A ±0,2 B MAX C ±0,2 D MAX E ±0,2 10 15 17,8 28 15 25 18,2 28 12,4 28 PM-V SERIES Code A MAX B1 ±0,2 B2 ±0,2 C MAX D ±0,2 E MAX Ø PIN ±0,1 L PIN +0/-0,5 PM-VA PM-VC PM-VD PM-VE 10,5 13,5 24 32 5 7,5 10 15 6,25 7,5 10 15 8,2 10,5 13 18 8,75 12,5 20 12,5 10,7 15 23 32 0,6 0,6 0,8 0,8 3,5 3,5 3,5 5 PM-VB SERIES 144 PM SERIES Curves: Impedance vs. Frequency Common Mode Chokes Common mode chokes with Ferrite cores Note: Impedance measurements have been obtained with both windings in parallel and at ambient temperature. 145 PM SERIES Common Mode Chokes Common mode chokes with Ferrite cores Curves: Impedance vs. Frequency Note: Impedance measurements have been obtained with both windings in parallel and at ambient temperature. 146 PM SERIES Curves: Impedance vs. Frequency Common Mode Chokes Common mode chokes with Ferrite cores Note: Impedance measurements have been obtained with both windings in parallel and at ambient temperature. 147