PTS Series Datasheet

PTS Series
www.vishay.com
Vishay Beyschlag
Platinum SMD Flat Chip
Temperature Sensor
FEATURES
• Standardized characteristics according to
IEC 60751
• Advanced thin film technology
• Short reaction times down to t0.9 ≤ 2 s (in air)
• Outstanding stability of temperature
characteristic
• Supports lead (Pb)-free soldering
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
PTS SMD flat chip temperature sensors are the perfect
choice for temperature control of electronics operating
under varying environmental conditions. The highly
controlled platinum thin film manufacturing process
guarantees an outstanding stability of temperature
characteristics which ensures reliable operation even under
harsh conditions.
APPLICATIONS
Temperature measurement and control in
• Aviation electronics
• Industrial electronics
• Medical electronics
TECHNICAL SPECIFICATIONS
DESCRIPTION
Resistance values R0 at 0 °C
PTS 0603
PTS 0805
PTS 1206
100 Ω
100 Ω, 500 Ω
100 Ω, 500 Ω, 1000 Ω
Temperature coefficient (0 °C to +100 °C)
+3850 ppm/K
Tolerance classes
F0.3, F0.6
Operating temperature range
-55 °C to +155 °C
Long term stability ΔR0/R0;
R0 change after 1000 h at +155 °C
< ± 0.04 %
Insulation resistance
Measurement current
Imeas. (DC) (2)
Self-heating (1)
> 10 MΩ
100 Ω
0.1 mA to 0.50 mA
0.1 mA to 1.0 mA
0.1 mA to 1.0 mA
500 Ω
-
0.1 mA to 0.40 mA
0.1 mA to 0.40 mA
1000 Ω
-
-
0.1 mA to 0.25 mA
≤ 0.9 K/mW
≤ 0.8 K/mW
≤ 0.7 K/mW
t0.5 ≤ 0.1 s
t0.5 ≤ 0.2 s
t0.5 ≤ 0.3 s
t0.9 ≤ 0.2 s
t0.9 ≤ 0.3 s
t0.9 ≤ 0.4 s
t0.5 ≤ 1.0 s
t0.5 ≤ 1.5 s
t0.5 ≤ 2.0 s
t0.9 ≤ 2.0 s
t0.9 ≤ 3.0 s
t0.9 ≤ 5.0 s
Still air
(v = 0 m/s)
Flowing
water
(v = 0.4 m/s)
Thermal response time (1)
Flowing air
(v = 3.0 m/s)
Notes
(1) Valid for sensor element only
(2) Indicated measurement currents can be applied continuously with self-heating effect of less then 0.1 °C
Document Number: 28762
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 08-Dec-15
PTS Series
www.vishay.com
Vishay Beyschlag
DIMENSIONS in millimeters
Tt
W
WT
H
Tb
L
DIMENSIONS - PTS sensor types, mass and relevant physical dimensions
TYPE
W
WT
Tt
Tb
MASS
(mg)
1.55 +0.05 / -0.1
0.85 ± 0.1
> 75 % of W
0.3 + 0.15/- 0.2
0.3 + 0.15/- 0.2
1.9
2.0 ± 0.1
1.25 ± 0.15
> 75 % of W
0.4 ± 0.2
0.4 ± 0.2
4.6
3.1 + 0.1/- 0.2
1.6 ± 0.15
> 75 % of W
0.5 ± 0.25
0.5 ± 0.25
9.2
H
L
PTS 0603
0.45 + 0.1/- 0.05
PTS 0805
0.45 + 0.1/- 0.05
PTS 1206
0.55 ± 0.1
SOLDER PAD DIMENSIONS in millimeters
X
G
Y
Z
RECOMMENDED SOLDERPAD DIMENSIONS
TYPE
WAVE SOLDERING
REFLOW SOLDERING
G
Y
X
Z
G
Y
X
Z
PTS 0603
0.55
1.1
1.1
2.75
0.65
0.7
0.95
2.05
PTS 0805
0.8
1.25
1.50
3.2
0.9
0.9
1.4
2.7
PTS 1206
1.4
1.5
1.9
4.4
1.5
1.15
1.75
3.8
DESCRIPTION
A homogeneous film of platinum is deposited on a high
grade (Al2O3) ceramic substrate and conditioned to achieve
the correct temperature coefficient and stability. The
sensor-elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure matte tin on nickel
plating, the immunity against tin whisker growth has been
proven under extensive testing.
QUALITY
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual sensors. Only accepted products are laid directly
into the paper tape in accordance with IEC 60286-3.
STORAGE
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 2 years.
ASSEMBLY
The Pt-sensors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase. The
encapsulation is resistant to all cleaning solvents
commonly used in the electronics industry, including
alcohols, esters and aqueous solutions. The suitability of
conformal coatings, if applied, shall be qualified by
appropriate means to ensure the long-term stability of the
whole system. The use of potting resins in close contact
with the coating or terminations is not allowed. For frequent
high temperature usage, thermal compatible substrates and
solder alloys should be used, to minimize any thermal
mismatch with the component.
All products comply with the CEFIC-EECA-EICTA list of
legal restrictions on hazardous substances.
This includes full compatibility with the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV)
• 2000/53/EC Annex II to End of Vehicle Life Directive
(ELV II)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The Pt-sensors are tested in accordance with
• IEC 60751
• IEC 60068 series
Document Number: 28762
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 08-Dec-15
PTS Series
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER (2): PTS060301B100RP100
P
T
S
0
6
0
3
0
SPECIAL
CHARACTER
TYPE
SIZE CODE
3 digits
4 digits
1 digit
PTS = Platinum
Temperature
Sensor SMD
0603
0805
1206
0 = neutral
1
B
1
0
TOLERANCE
CLASS
0
R
P
1
0
0
RESISTANCE
VALUE
PACKAGING (3)
2 digits
4 digits
2 digits
2 digits
1B = class F0.3
2B = class F0.6
100R = 100 Ω
500R = 500 Ω
1K00 = 1000 Ω
PU
P1
00 = standard
SPECIAL
PRODUCT DESCRIPTION (4): PTS 0603-B P1 100R
PTS
0603
-B
P1
100R
TYPE
SIZE CODE
TOLERANCE
CLASS
PACKAGING (3)
RESISTANCE VALUE
PTS = Platinum
Temperature
Sensor SMD
0603
0805
1206
B = Class F0.3
2B = Class F0.6
PU
P1
100R = 100 Ω
500R = 500 Ω
1K = 1000 Ω
Notes
(1) Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION
(2) The part number is shown to facilitate the introduction of a unified part numbering system
(3) Please refer to table PACKAGING
(4) We recommend that the Production Description is used to minimize the possibility of errors in order handling
PACKAGING
TYPE
PTS 0603
PTS 0805
PTS 1206
CODE
QUANTITY
PU
100
P1
1000
CARRIER
TAPE
WIDTH
PITCH
Paper tape acc.
IEC 60286-3
8 mm
4 mm
BOX/REEL
BOX/REEL
DIAMETER
Box
114 mm
Reel
180 mm/7"
FUNCTIONAL PERFORMANCE
The temperature resistance relationships of the PTS series
follow different equations:
For the temperature range of -55 °C up to 0 °C:
RT = R0 x (1 + A x T + B x T2 + C x (T - 100 °C) x T3)
And for the temperature range of 0 °C up to +155 °C:
RT = R0 x (1 + A x T + B x T2)
RT: Resistance as a function of temperature
R0: Nominal resistance value at 0 °C
T: Temperature in °C
Coefficients according to IEC 60751:
A = 3.9083 x 10-3 °C-1
B = -5.775 x 10-7 °C-2
C = -4.183 x 10-12 °C-4
The tolerances values of the PTS series are classified by the
following equations as specified by IEC 60751:
Class F0.3: ΔTF0.3 = ± (0.30 + 0.005 x |T|)
Class F0.6: ΔTF0.6 = ± (0.60 + 0.010 x |T|)
Document Number: 28762
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 08-Dec-15
PTS Series
www.vishay.com
Vishay Beyschlag
NOMINAL RESISTANCE VALUE
NOMINAL RESISTANCE VALUES
TEMPERATURE
CLASS F0.3
CLASS F0.6
TTol.
TTol.
R/R0
RATIO
R0
100 Ω
(Ω)
(Ω)
(Ω)
(°C)
(°C)
-55
0.78319
78.32
391.59
783.19
± 0.58
± 1.15
-50
0.80306
80.31
401.53
803.06
± 0.55
± 1.10
-45
0.82290
82.29
411.45
822.90
± 0.53
± 1.05
-40
0.84271
84.27
421.35
842.71
± 0.50
± 1.00
-35
0.86248
86.25
431.24
862.48
± 0.48
± 0.95
-30
0.88222
88.22
441.11
882.22
± 0.45
± 0.90
-25
0.90192
90.19
450.96
901.92
± 0.43
± 0.85
-20
0.92160
92.16
460.80
921.60
± 0.40
± 0.80
-15
0.94124
94.12
470.62
941.24
± 0.38
± 0.75
-10
0.96086
96.09
480.43
960.86
± 0.35
± 0.70
-5
0.98044
98.04
490.22
980.44
± 0.33
± 0.65
0
1.00000
100.00
500.00
1000.00
± 0.30
± 0.60
5
1.01953
101.95
509.76
1019.53
± 0.33
± 0.65
10
1.03903
103.90
519.51
1039.03
± 0.35
± 0.70
15
1.05849
105.85
529.25
1058.49
± 0.38
± 0.75
20
1.07794
107.79
538.97
1077.94
± 0.40
± 0.80
25
1.09735
109.73
548.67
1097.35
± 0.43
± 0.85
30
1.11673
111.67
558.36
1116.73
± 0.45
± 0.90
35
1.13608
113.61
568.04
1136.08
± 0.48
± 0.95
40
1.15541
115.54
577.70
1155.41
± 0.50
± 1.00
45
1.17470
117.47
587.35
1174.70
± 0.53
± 1.05
50
1.19397
119.40
596.99
1193.97
± 0.55
± 1.10
55
1.21321
121.32
606.60
1213.21
± 0.58
± 1.15
60
1.23242
123.24
616.21
1232.42
± 0.60
± 1.20
65
1.25160
125.16
625.80
1251.60
± 0.63
± 1.25
70
1.27075
127.08
635.38
1270.75
± 0.65
± 1.30
75
1.28987
128.99
644.94
1289.87
± 0.68
± 1.35
80
1.30897
130.90
654.48
1308.97
± 0.70
± 1.40
85
1.32803
132.80
664.02
1328.03
± 0.73
± 1.45
90
1.34707
134.71
673.53
1347.07
± 0.75
± 1.50
95
1.36608
136.61
683.04
1366.08
± 0.78
± 1.55
100
1.38506
138.51
692.53
1385.06
± 0.80
± 1.60
105
1.40400
140.40
702.00
1404.00
± 0.83
± 1.65
110
1.42293
142.29
711.46
1422.93
± 0.85
± 1.70
115
1.44182
144.18
720.91
1441.82
± 0.88
± 1.75
120
1.46068
146.07
730.34
1460.68
± 0.90
± 1.80
125
1.47951
147.95
739.76
1479.51
± 0.93
± 1.85
130
1.49832
149.83
749.16
1498.32
± 0.95
± 1.90
135
1.51710
151.71
758.55
1517.10
± 0.98
± 1.95
140
1.53584
153.58
767.92
1535.84
± 1.00
± 2.00
145
1.55456
155.46
777.28
1554.56
± 1.03
± 2.05
150
1.57325
157.33
786.63
1573.25
± 1.05
± 2.10
155
1.59191
159.19
795.96
1591.91
± 1.08
± 2.15
(°C)
R0
500 Ω
R0
1000 Ω
Document Number: 28762
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 08-Dec-15
PTS Series
www.vishay.com
Vishay Beyschlag
Ratio R/R0
1.70
1.60
PTS Series
1.50
R/R0
1.40
1.30
1.20
1.10
1.00
0.90
0.80
0.70
0.60
- 75
- 50
- 25
0
25
50
75
100
125
150
175
Temperature in °C
Tolerances for ClassF0.3 and F0.6
2.4
1.2
F0.6 Temp. Tol.
1.1
2.0
1.0
F0.6 R0 Tol.
1.8
1.6
0.9
0.8
1.4
0.7
F0.3 Temp. Tol.
1.2
0.6
1.0
0.5
0.8
0.4
F0.3 R0 Tol.
0.6
0.4
0.2
0.0
- 75
R0 Tol. in ± %
Temperature Tol. in ± °C
2.2
0.3
0.2
- 50
- 25
0
25
50
75
100
125
150
0.1
0.0
175
Temperature in °C
Document Number: 28762
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Revision: 08-Dec-15
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000