Fuseholders MAXI™ Fuse In-Line Fuseholder The In-Line Fuseholder provides an efficient, simple installation method for MAXI™ Fuse applications. Specifications Terminal: Copper Alloy Body: Black Thermoplastic (UL94HB) Cover: Translucent Thermoplastic Ambient Temp.: -10˚C to +80˚C Maximum number of fuseblocks tied together is two for all ratings, up to and including 50A. Part Number 152001 152900 913-653 913-654 913-550 Description Fuseholder-Rated at 60A Cover Ring tongue terminal for 2.5-6mm2 (12-10AWG) wire* Ring tongue terminal for 5-10mm2 (10-8 AWG) wire* M5 x 8 Screw per DIN 7985-4.8 *It is recommended that cross linked polyethelene (GXL) insulated wire be used, as described in SAE J1128 (Type, FLY in DIN 76722) or equivalent. MAXI™ Fuse In-Line Fuseholder With Protective Cap Supplied with two 6” leads 6 gauge wire for up to 60 amp MAXI™ Fuse applications, this In-Line Fuseholder also provides a protective cover for harsh under-the-hood environments. Mounting hole also permits easy bulkhead installation. Part Number: MAH 1 ATO® Blade Fuse Splashproof In-Line Fuseholder The Splashproof Fuseholder provides a protective cover to permit the use of ATO® Fuses in harsh environments. Specifications Body: Black Alcryn Thermoplastic Cover: Black Alcryn Thermoplastic Ambient Temp.: -10˚C to +80˚C Part Number FHAC001 FHAC002 Description #16AWG (1.0mm2 ) stranded black wire with terminals rated for 20A #12AWG (3.0mm2 ) stranded orange wire with terminals rated for 30A 29