88 -0,2 date 2,9 -0,3 class RC 2 ERNI XXXXXXX 5,2 -0,1 max.11,6 6,4 -0,1 Stecklänge mating length Datum 2,5 ±0,2 Anforderungsstufe Stecklänge / mating length a b c ESL 2,54 2x2,54=5,08 4,8 ±0,2 0,8 ±0,1 78,74 max.95 0,8 ±0,1 0,6 2,54 E = early mate, late break / voreilend 85,2 a32 +0,2 S = standard Retentive clip +0,1 1 L = late mate, early break / nacheilend a1 31x2,54=78,74 c1 +0,4 83,2 90 ±0,1 c32 2,5 -0,2 0,3 8,7 +0,1 max.11,1 6 2,8 Befestigungsclip THR = through hole reflow Bauart 4 / type 4 Anforderungsstufe 2 = 400 Steckzyklen / performance class 2 = 400 mating cycles Fehlende Maße und Angaben nach IEC 60 603-2 / DIN EN 60 603-2 Bestückungsplan / contact layout 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S a b c Missing information and dimensions per IEC 60 603-2 / DIN EN 60 603-2 Leiterplatten-Lochbild / PCB drillhole pattern 1 ±0,1 +0,1 0,05 alle Löcher all holes 0,3 2x 2,54 =5,08 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2,54 31x 2,54 =78,74 90 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 2,8 Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste R 96 THR+Clip Male Connector R 96 THR+Clip 374603 www.ERNI.com b 04.09.2013 Index Date Class STVR I A3