INVERTERS PBSP Everest Series 2 0 0 0 - 3 8 0 0 W AT T D C / A C I N V E R T E R FEATURES • • • • • • • True sinewave waveform Optional remote shutdown switch Adjustable load detection Extra heavy duty, low loss battery cables Fast and flexible installation Non-corrosive chassis Isolated output SPECIFICATIONS SELECTION TABLE INPUT Voltage Voltage range 24 and 48Vdc. 24Vdc (21-32Vdc). 48Vdc (42-64Vdc). OUTPUT Voltage Frequency Output waveform 240Vac ±1%. 50Hz ±0.07% (24-2K2 & 48-2K4). 50Hz ±0.15% (24-3K0 & 48-3K8). True sinewave < 2.35% THD (70% load). Power factor range 0.1-1.0. Efficiency 94-95%. Load detection LED status indicator 2-20W. AC status, over temp and DC voltage out of range. MODEL DC INPUT NUMBER INPUT RANGE PBSP-24I CONT. 5 MIN SURGE RATING RATING 5 SEC PEAK EFF% WEIGHT 24V 21-32V 2200W 3200W 5000W 94% 25.0KG PBSP-24Z 24V 21-32V 3000W 4500W 5000W 94% 34.0KG PBSP-48I 48V 42-64V 2400W 3500W 5000W 94% 24.0KG PBSP-48Z 48V 42-64V 3800W 5000W 5000W 95% 34.0KG TECHNICAL ILLUSTRATIONS GENERAL AC output connection Terminal block on din rail. Battery leads 1.2meters with 10mm lug. Enclosure protection Dimensions IP20. 456x300x243mm (except SEAP-48-3K8, 510x300x243mm). STANDARDS AND APPROVALS Safety standards AS3000 wiring. C-tick AS/NZS CISPR14, AS/NZS 1044 EMC standards AS/NZS2064 ENVIRONMENTAL SPECIFICATIONS 526 Temperature Range -25°C to 50°C, derate above 30°C Humidity 95% RH, non condensing Doc. No. PBC9 Rev.C 28-4-11