Photoelectric sensors OADM 260I1101/S14C Distance sensors dimension drawing 51 4,5 39,5 7 56 3 5,5 13 2 * 52,6 66 4,4 LED 4,5 25,4 M12 x 1 * emitter axis general data photo measuring distance Sd 200 ... 13000 mm measuring distance Sd (white 90%) 200 ... 13000 mm measuring distance Sd (grey 18%) 200 ... 9000 mm measuring distance Sd (black 6%) 200 ... 4000 mm adjustment Teach-in: button / external Teach-in range min. > 100 mm power on indication LED green soiled lens indicator LED red resolution 5 mm linearity ± 15 mm repeatability ± 15 mm (with 40 kLux ambient light) light source pulsed red laser diode wave length 660 nm laser class 2 beam type point beam diameter 5 ... 50 mm connection diagram electrical data measuring rate 10 ms voltage supply range +Vs 15 ... 28 VDC current consumption max. (no load) 250 mA (typ. 110 mA @ 24V) output circuit analog output signal 4 ... 20 mA load resistance (analog I) < (+Vs - 6 V) / 0,02 A output current < 100 mA alarm output push-pull short circuit protection yes reverse polarity protection yes, Vs to GND BU (3) Z Z +VS analog alarm ext. teach 0V laser warning LASER RADIATION DO NOT STARE INTO BEAM Wavelength: 620...680nm Max. av. Output: < 1mW IEC 60825-1, Ed. 2, 2007 CLASS 2 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 mechanical data width / diameter 25,4 mm height / length 66 mm depth 51 mm type rectangular housing material aluminum front (optics) glass connection types connector M12 5 pin, rotatable OADM 260I1101/S14C Analog Push Pull BN (1) WH (2) BK (4) GY (5) www.baumer.com 28/4/2015 Photoelectric sensors OADM 260I1101/S14C Distance sensors ambient conditions ambient light immunity < 40 kLux operating temperature -25 ... +50 °C protection class IP 67 typ. temp. coefficient 0,4 mm /°C OADM 260I1101/S14C www.baumer.com 28/4/2015