Part Number：S7■1□B Net-Access™ S 13031A ©Panduit Corporation Japan Branch EIA19 ( ) 15.88 15.88 12.70 15.88 15.88 12.70mm 10 25 ( +60 [ 85 [ ] ] 698 [mm] 1,044 [mm] 1,115mm 2 2,026 [mm] 5 2,159 [mm] 8 2,292 [mm] 526 767 [mm] POU 583 913 [mm] POU 26mm 0.8 [mm] ) 76 437 [mm] 76 532 [mm] 1,360 [kg] / 1,020 [kg] / 2 42RU 5 45RU 8 48RU BL ( ) 01 B W 2013 4 WH ( ) 19 Page 1 / 7 Part Number：S7■1□B Net-Access™ S 13031A ©Panduit Corporation Japan Branch ( ) (RU) S7212B S7512B S7812B S7219B S7519B S7819B (mm) 42 45 48 42 45 48 ( ) POU ( ) 1 1 1 1 1 1 1,070 1 1 1 1 1 1 1 ( ) ( ) 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 (kg) ( ) 1 1 1 1 1 1 132 138 145 108 116 125 9 1 RoHS 01 01 2013.4.19 2013 4 19 Page 2 / 7 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. TOP CAP KNOCK-OUTS FOR POU POWER CORD B REAR SPLIT DOORS FRONT DOOR SIDE PANEL SIDE PANEL 1. VISIT OUR ON-LINE CATALOG AT WWW.PANDUIT.COM FOR A LIST OF CURRENT PARTS APPLICABLE FOR USE WITH THIS PRODUCT. 2. PRIMARY DIMENSIONS ARE IN MILLIMETERS. 3. INDEPENDENT ADJUSTABLE REAR EQUIPMENT MOUNTING RAILS (EIA) ADJUST FROM 141mm TO 437mm AND FROM 526mm TO 767mm WITH POU BRACKETS AND CABLE MANAGEMENT FINGERS IN PLACE. REMOVING POU BRACKETS AND FINGERS INCREASES MAXIMUM E-RAIL SPAN TO 913mm. 4. CAN BE USED WITH ANY 19" EIA STANDARD COMPONENT IN ADDITION TO ALL PANDUIT HORIZONTAL CABLE MANAGEMENT AND PATCH PANEL PRODUCTS. 5. EIA UNIVERSAL STANDARD HOLE PROGRESSION ON EQUIPMENT RAILS 15.88mm, 15.88mm, 12.70mm, 15.88mm, 15.88mm, 12.7mm...ETC. 6. PARTS SUPPLIED: -BASE CABINET -FRONT DOOR (SEE CHART ON SHEET 2) -REAR SPLIT DOOR (SEE CHART ON SHEET 2) -EQUIPMENT RAILS FRONT & REAR (SEE CHART ON SHEET 2) -POU BRACKETS (SEE CHART ON SHEET 2) -CASTERS (SEE CHART ON SHEET 2) -INSTRUCTION SHEET 7. RACK UNIT SPACING NUMERALS ARE CLEARLY PRINTED ON EQUIPMENT MOUNTING RAILS. 8. FULLY BONDED STRUCTURE WHEN ASSEMBLED PER INSTRUCTIONS. 9. STATIC LOAD RATING. 1360 Kg(3000 LBS) 10. ROLLING LOAD RATING. 1020 Kg (2250 LBS) 11. SINGLE POINT GROUND LOCATIONS AT TOP AND BOTTOM OF CABINET. 12. ALL CABINET RAILS ARE INSTALLED NUMBERS UP. B TITLE NET-ACCESS S TYPE CABINET 700mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305TJ/00.PRT DATASET FILE NAME 12V305TJ_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-29-12 TWV JDW RELEASED TO PRODUCTION THIRD ANGLE PROJECTION 12V305TJ-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TWV DATE 8-29-12 CHK 12V305TJ-DC SIZE SCALE JDW NONE 1 SHT 1 OF 5 A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. PART NO. DESCRIPTION NET-ACCESS S-TYPE CABINET 700mm X 42RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 700mm X 45RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 700mm X 48RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 700mm X 42RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 700mm X 45RU X 1070mm DEEP NET-ACCESS S-TYPE CABINET 700mm X 48RU X 1070mm DEEP S7212B S7512B S7812B S7219B B S7519B S7819B SINGLE HINGE FRONT DOOR SPLIT REAR DOOR SINGLE PIECE SIDE PANEL FRONT CAGE NUT E-RAIL REAR CAGE NUT FINGER MGMT E-RAIL REAR CAGE NUT VERTICAL PATCH E-RAIL STANDARD POU BRACKETS CASTERS CABLE MGMT FINGERS VERTICAL PATCHING CABINET WEIGHT 01 01 02 02 02 00 02 04 00 00 132 Kg/EACH 290 LBS/EACH 01 01 02 02 02 00 02 04 00 00 138 Kg/EACH 305 LBS/EACH 01 01 02 02 02 00 02 04 00 00 145 Kg/EACH 320 LBS/EACH 01 01 00 02 02 00 02 04 00 00 108 Kg/EACH 240 LBS/EACH 01 01 00 02 02 00 02 04 00 00 116 Kg/EACH 255 LBS/EACH 01 01 00 02 02 00 02 04 00 00 125 Kg/EACH 275 LBS/EACH B SUBTRACT 18 kg [40 LBS] FOR PACKAGING TITLE NET-ACCESS S TYPE CABINET 700mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305TJ/00.PRT DATASET FILE NAME 12V305TJ_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-29-12 TKW JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305TJ-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TKW DATE 8-29-12 CHK 12V305TJ-DC SIZE SCALE JDW NONE 1 SHT 2 OF 5 A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 1115 43.9 698 27.5 HEIGHT WITH CASTERS B B 42RU 2026 [79.8] 45RU 2159 [85.0] 48RU 2292 [90.2] 1068 42.0 TILE COVERAGE DEPTH RIGID FRONT CASTERS SWIVEL REAR CASTERS TITLE NET-ACCESS S TYPE CABINET 600mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305TJ/00.PRT DATASET FILE NAME 12V305TJ_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-27-12 TKW JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305TJ-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TKW DATE 8-27-12 CHK 12V305TJ-DC SIZE SCALE JDW NONE 1 SHT 3 OF 5 A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. (6) LOCATIONS TAPPED FOR M10 SEE NOTES ON THREADED ROD SHEET 1 FOR REAR EQUIPMENT RAIL ADJUSTMENT RANGE B (2) 165mm X 165mm KNOCKOUTS FOR POU POWER CORDS COMPATIBLE W/COOL BOOT P/N: CTGN6X6 VERTICAL CABLE MANAGEMENT FINGERS WITH BEND RADIUS CONTROL CAN BE ASSEMBLED TO CABLE MANAGEMENT TYPE RAILS BY CUSTOMER (NOT SHOWN) RACK UNITS ARE NUMBERED AND INDEXED FOR IDENTIFICATION (2) FIXED FRONT EQUIPMENT RAILS B (2) REAR EQUIPMENT RAILS EITHER CABLE MANAGEMENT TYPE -ORVERTICAL PATCH TYPE SEE P/N REFERENCE TABLE ON SHEET 2 FOR CABINET CONFIGURATIONS (12) CABLE OPENINGS (33mm X 120mm) WITH BEZELS AND COVERS COMPATIBLE W/ COOL BOOT P/N: CTGN1X5 (2) POU BRACKETS TOP VIEW FRONT DOOR, REAR DOOR, AND SIDE PANELS NOT SHOWN TITLE NET-ACCESS S TYPE CABINET 700mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305TJ/00.PRT DATASET FILE NAME 12V305TJ_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-29-12 TWV JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305TJ-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TWV DATE 8-29-12 CHK 12V305TJ-DC SIZE SCALE JDW NONE 1 SHT 4 OF 5 A 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 698 27.5 FRAME WIDTH 2X 557 21.9 172 LEVELING LEGS 6.8 FLOOR MOUNT 20 B B .8 1044 1003 41.1 FRAME LENGTH 699 39.5 27.5 LEVELING LEG FLOOR MOUNT 4X 14 DIA .6 FLOOR MOUNTING HOLE LOCATIONSSOME PARTS REMOVED FOR CLARITY 2X 71 2.8 2X 241 9.5 2X 216 8.5 REAR OF CABINET BOTTOM VIEW TITLE NET-ACCESS S TYPE CABINET 700mm WIDE X 1070mm DEEP FAMILY A A CUSTOMER DRAWING ITEM REVISION NAME 12V305TJ/00.PRT DATASET FILE NAME 12V305TJ_DC/00A.PRT UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.03 X.XX +/- 0.018 X.XXX +/- 0.007 METRIC X. X.X X.XX - MILLIMETER +/- 0.8 +/- 0.46 +/- 0.18 MATERIAL/COLOR: ANGLE +/- 1 N/A DRAWING NUMBER: 00A 8-29-12 TWV JDW SEE SHEET 1 OF 5 FOR REVISIONS THIRD ANGLE PROJECTION 12V305TJ-DC DRAWN BY REV DATE BY CHK APR DESCRIPTION 2 ECN TWV DATE 8-29-12 CHK 12V305TJ-DC SIZE SCALE JDW NONE 1 SHT 5 OF 5 A